fannuoyi 808 Cam Keychain Camera 1080P RC FPV Motion Detector Outdoor Camcorder User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your fannuoyi 808 Cam Keychain Camera. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its lifespan.

Product Overview

The fannuoyi 808 Cam is a compact camera designed to resemble a car key fob, offering discreet video recording capabilities. It features 1080P HD video capture, motion detection, and loop recording. The device supports Micro SD cards up to 32GB for storage.

An image of the fannuoyi 808 Cam Keychain Camera, designed to resemble a car key fob. It is black with four raised buttons on its surface and a small lens visible on one side.

Package Contents

• fannuoyi 808 Cam Keychain Camera
• USB Charging/Data Cable

Setup

1. Insert Micro SD Card: Locate the Micro SD card slot on the device. Gently insert a Micro SD card (up to 32GB, Class 10 recommended) until it clicks into place. Ensure the card is formatted to FAT32 for optimal performance.
2. Charge the Device: Connect the camera to a USB power source (e.g., computer USB port, USB wall adapter) using the provided USB cable. The indicator light will show charging status. Allow approximately 2-3 hours for a full charge.

Operating Instructions

Power On/Off

• Power On: Press and hold the Power button for 2-3 seconds. The indicator light will illuminate.
• Power Off: Press and hold the Power button for 3-5 seconds until the indicator light turns off.

Video Recording (1080P HD)

1. Ensure the device is powered on.
2. Press the Mode button to select video recording mode. The indicator light will change to reflect this mode.
3. Press the Record button to start recording. The indicator light will flash during recording.
4. Press the Record button again to stop recording. The video file will be saved to the Micro SD card.

Motion Detection

The camera can be set to record only when motion is detected.

1. With the device powered on, press the Mode button until the motion detection indicator light is active.
2. The camera will automatically begin recording when motion is detected within its field of view and stop when motion ceases.

Loop Recording

When the Micro SD card is full, the camera will automatically overwrite the oldest video files to continue recording new footage.

Time/Date Stamp

The camera supports adding a time and date stamp to recorded videos. Refer to the device's configuration file (usually a TXT file on the SD card) for instructions on how to enable or disable this feature and set the correct time.

Connecting to Computer

1. Ensure the camera is powered off.
2. Connect the camera to your computer using the provided USB cable.
3. The computer should recognize the camera as a removable disk.
4. Navigate to the appropriate folder to access your recorded video files.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera body. Avoid using liquid cleaners or solvents.
• Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For prolonged storage, ensure the battery is partially charged (around 50%) to maintain battery health.

Troubleshooting

• Device not turning on: Ensure the battery is fully charged. If the issue persists, try resetting the device (if a reset button/pinhole is available).
• Cannot record video: Check if a Micro SD card is properly inserted and has sufficient free space. Ensure the card is formatted correctly (FAT32).
• SD card issues (e.g., unreadable, corrupted): This can sometimes occur with incompatible or faulty SD cards. Try a different, high-quality Micro SD card (Class 10, up to 32GB).
• Poor video quality: Ensure the lens is clean and free from obstructions. Record in well-lit conditions for best results.
• Device gets hot during operation: Some heat generation is normal during recording or charging. If the device becomes excessively hot or emits a burning smell, discontinue use immediately and contact support.

Specifications

Warranty and Support

For warranty information or technical support, please contact the manufacturer, fannuoyi, through their official channels or the retailer from whom the product was purchased. Keep your purchase receipt as proof of purchase.