Hiplok FX Retractable Cable Lock User Manual

1. Introduction

Thank you for choosing the Hiplok FX Retractable Cable Lock. This compact and lightweight lock is designed to provide quick security for your bicycle during short stops, protecting against opportunistic theft. Its innovative design allows for easy carrying and convenient use. Please read this manual carefully to ensure proper setup and operation of your lock.

Image 1.1: The Hiplok FX Retractable Cable Lock in Lime color.

2. Safety Information

• The Hiplok FX is intended for low-risk areas and short stops. For high-risk areas or extended periods, consider using a higher security lock.
• Always ensure the cable is fully retracted and the combination is scrambled after use to prevent accidental damage or unauthorized access.
• Keep the lock mechanism clean and free from debris.
• Do not attempt to force the lock or cable, as this may cause damage.

3. Package Contents

Your Hiplok FX Retractable Cable Lock package should contain the following:

• 1 x Hiplok FX Retractable Cable Lock

Image 3.1: Front and back view of the Hiplok FX lock, showing the combination dial and the reflective loop.

4. Setup: Setting Your Combination

Your Hiplok FX comes with a resettable 3-digit combination. Follow these steps to set your personal code:

1. The default combination is typically 0-0-0. Align the dials to this code.
2. Locate the small reset button or lever on the side or bottom of the lock. Use a pen or a pointed object to press and hold this button/lever.
3. While holding the reset button/lever, set your desired 3-digit combination by rotating the dials. Choose a memorable number.
4. Release the reset button/lever. Your new combination is now set.
5. Important: Write down your combination and store it in a safe place. Do not store it with the lock.

5. Operating Instructions

5.1. Locking Your Bicycle

1. Align the dials to your set 3-digit combination.
2. Press the cable release button (usually located near where the cable retracts) to extend the steel cable.
3. Thread the cable through your bicycle frame and around a secure, immovable object (e.g., a bike rack, lamppost).
4. Insert the end of the cable into the locking mechanism until it clicks securely into place.
5. Scramble the combination dials to secure the lock.

Image 5.1: Demonstrating how to secure a bicycle using the Hiplok FX lock.

5.2. Unlocking Your Bicycle

1. Align the dials to your set 3-digit combination.
2. Press the cable release button. The cable end should disengage from the lock body.
3. Gently guide the cable back into the lock body until it is fully retracted.

5.3. Carrying the Lock

The Hiplok FX features a unique Clip + Ride system for convenient transport.

• The integrated clip allows you to attach the lock to jersey pockets, belt loops, or bag straps.
• The reflective loop on the back provides added visibility when worn, enhancing safety.

Image 5.2: The Hiplok FX lock conveniently clipped to a pocket for transport.

6. Maintenance

• Regularly wipe down the lock body and cable with a damp cloth to remove dirt and grime.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
• If the cable retraction mechanism becomes stiff, apply a small amount of silicone-based lubricant to the cable entry point.
• Store the lock in a dry place when not in use.

7. Troubleshooting

7.1. Cable Not Retracting Fully

• Check for any kinks or twists in the cable. Straighten the cable before attempting to retract.
• Ensure the cable is clean and free of debris. Clean if necessary.
• Apply a small amount of silicone lubricant to the cable entry point and gently work the cable in and out to distribute the lubricant.

7.2. Forgetting Your Combination

If you forget your combination, there is no master key or override. You will need to try all 1000 possible combinations (000-999) until you find the correct one. This process can be time-consuming but is the only way to unlock the device if the combination is lost.

7.3. Dials Are Stiff

• Clean the dials and the area around them to remove any dirt or grit.
• Apply a small amount of silicone lubricant to the dial mechanism.

8. Specifications

9. Warranty and Support

Hiplok products are manufactured to high standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Hiplok website. If you encounter any issues or require technical assistance, please contact Hiplok customer support through their official channels.

Official Hiplok Website: www.hiplok.com