Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Westbrass E507D-1F-26 7-inch reach wall mount tub spout with diverter. Please read all instructions carefully before beginning installation to ensure proper function and longevity of the product.
Figure 1: Front view of the Westbrass E507D-1F-26 tub spout in polished chrome.
Key Features:
- Extended 7-Inch Reach: Designed to prevent water splashing on tubs with wider decking areas.
- Front Diverter (1/2" IPS): Conveniently switches water flow between the tub spout and shower head.
- Easy Wall Mount Installation: Attaches to standard 1/2-inch plumbing nipples.
- Durable Zinc Construction: Provides enhanced durability and corrosion resistance for daily use.
Video 1: Overview of the Westbrass 7" Diverter Tub Spout in Polished Chrome. This video demonstrates the product's appearance and basic functionality.
Safety Information
Please observe the following safety precautions during installation and use:
- Always turn off the main water supply before attempting any plumbing work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- Ensure all connections are secure to prevent leaks. Do not overtighten.
- If you are unsure about any step, consult a qualified plumber.
Package Contents
Verify that all components are present before beginning installation:
- 1 x Westbrass E507D-1F-26 Tub Spout with Diverter
Specifications
Figure 2: Technical drawing with key dimensions for the E507D-1F tub spout.
| Attribute | Detail |
|---|---|
| Model Number | E507D-1F-26 |
| Brand | Westbrass |
| Material | Zinc |
| Finish Type | Polished Chrome |
| Mounting Type | Wall Mount |
| Spout Reach | 6.5 Inches (from wall connection point) |
| Spout Height | 2.5 Inches |
| Connection Type | 1/2-inch IPS Front Thread |
| Diverter | Included, Front-operated |
Figure 3: Detailed dimensions of the Westbrass tub spout.
Installation Instructions
This tub spout is designed for easy wall-mount installation onto a standard 1/2-inch IPS threaded pipe nipple. Ensure your existing plumbing configuration matches the requirements.
Figure 4: Required pipe length for installation. The pipe nipple should extend approximately 5.5 inches from the finished wall.
Step-by-Step Guide:
- Turn Off Water Supply: Locate the main water shut-off valve for your home or bathroom and turn it off.
- Remove Old Spout: If replacing an existing spout, twist the old spout counter-clockwise to remove it. Some spouts may have a set screw underneath that needs to be loosened first.
- Prepare Pipe: Clean the 1/2-inch wall nipple thoroughly. Apply plumber's tape (PTFE tape) clockwise around the threads of the pipe nipple to ensure a watertight seal.
- Install New Spout: Screw the new Westbrass tub spout clockwise onto the pipe nipple by hand. Tighten gently until snug. Ensure the spout is level and the diverter is facing upwards.
- Secure Spout: If your spout includes a set screw (typically located on the underside), tighten it with an appropriate hex key to secure the spout firmly to the pipe.
- Check Diverter: Ensure the diverter mechanism moves smoothly up and down.
- Restore Water Supply & Check for Leaks: Slowly turn the main water supply back on. Check all connections for any signs of leakage. If leaks occur, turn off the water, tighten the spout slightly, and recheck. Do not overtighten.
Figure 5: Visual representation of the installation steps.
Operating Instructions
The Westbrass E507D-1F-26 tub spout features a front-operated diverter for easy switching between tub fill and shower mode.
- Tub Fill: To fill the tub, ensure the diverter knob is in the down position. Water will flow from the spout into the tub.
- Shower Mode: To divert water to the shower head, pull the diverter knob upwards. Water will then flow to the shower head. Push the knob back down to return to tub fill mode.
Maintenance
To maintain the polished chrome finish and ensure optimal performance of your tub spout, follow these guidelines:
- Cleaning: Clean the spout regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for polished chrome finishes.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, or cleaners containing ammonia, bleach, or acid, as these can damage the finish.
- Diverter Care: If the diverter becomes stiff, a small amount of silicone-based lubricant can be applied to the moving parts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from base of spout | Loose connection or insufficient plumber's tape. | Turn off water supply, remove spout, reapply plumber's tape, and re-tighten. Ensure set screw (if present) is secure. |
| Diverter does not fully engage/disengage | Mineral buildup or internal mechanism issue. | Clean the diverter area. Apply silicone lubricant. If problem persists, the diverter mechanism may need replacement. |
| Low water flow from spout | Partial obstruction in pipe or spout. | Check for debris in the spout or pipe. Ensure main water supply is fully open. |
Warranty and Support
Warranty Information:
This Westbrass tub spout is covered by a 1 Year Limited Warranty from the date of purchase. This warranty covers defects in material and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Westbrass customer service.
Customer Support:
For technical assistance, replacement parts, or warranty claims, please contact Westbrass customer service. Contact information can typically be found on the Westbrass website or on the product packaging.
Website: www.westbrass.com
