Orbit 26700

Orbit S&M 26700 8 JET MAX WATERING GUN - Instruction Manual

Brand: Orbit | Model: 26700

Product Overview

The Orbit S&M 26700 8 Jet Max Watering Gun is a durable and versatile garden hose nozzle designed for efficient watering. It features an 8-jet irrigation system that increases flow rate by up to 30% compared to standard flow guns, making it ideal for various gardening tasks and cleaning.

  • Enhanced Flow: 8-jet irrigation gun designed to increase water flow rate by 30%.
  • Versatile Spray Patterns: Offers 8 different jet types for various applications.
  • Ergonomic Design: Features a soft grip for comfortable use and flow adjustment via a rear control.
  • Durable Construction: Made with high-strength and durable materials, ensuring long-lasting performance.
  • Leak-Resistant: Engineered to prevent leaks, even with continuous use.
Orbit S&M 26700 8 Jet Max Watering Gun

Figure 1: The Orbit S&M 26700 8 Jet Max Watering Gun, showcasing its ergonomic design and blue and silver color scheme.

Setup Instructions

  1. Prepare Your Hose: Ensure your garden hose is free of kinks and debris.
  2. Attach the Nozzle: Screw the Orbit S&M 26700 Watering Gun onto the end of your garden hose. The nozzle features a G Connector or SAE inlet connection type. Hand-tighten until secure, ensuring a snug fit to prevent leaks.
  3. Check Connection: Turn on the water supply slowly and check for any leaks at the connection point. If leaks occur, tighten further or check the hose washer.
Side view of Orbit S&M 26700 8 Jet Max Watering Gun

Figure 2: Side view of the watering gun, illustrating the connection point for the garden hose.

Operating Instructions

The Orbit S&M 26700 offers 8 distinct spray patterns, easily adjustable by rotating the nozzle head. The flow can be controlled using the rear thumb control.

Adjusting Spray Patterns:

Rotate the blue nozzle head to cycle through the 8 available spray patterns:

  • Jet: A powerful, concentrated stream for cleaning tough dirt or reaching distant areas.
  • Center: A focused stream from the center, useful for targeted watering.
  • Cone: A conical spray pattern, ideal for general watering of plants and gardens.
  • Shower: A gentle, wide spray, perfect for delicate plants and flowers.
  • Angle: A directed, angled spray for specific watering needs.
  • Flat: A wide, flat spray for covering larger areas quickly.
  • Full: A robust, full-coverage spray for general watering.
  • Mist: A super fine mist, excellent for misting delicate seedlings or cooling yourself on hot days.
Close-up of Orbit S&M 26700 nozzle head showing 8 spray patterns

Figure 3: Close-up view of the nozzle head, highlighting the various spray pattern options.

Controlling Water Flow:

The rear thumb control allows for easy adjustment of water flow. Slide the control forward to increase flow and backward to decrease or shut off the water. This intuitive design makes it simple to manage water output with one hand.

Hand holding Orbit S&M 26700 8 Jet Max Watering Gun while spraying

Figure 4: The watering gun in use, demonstrating the spray pattern and ease of thumb control.

Maintenance

Proper maintenance will extend the life of your Orbit S&M 26700 Watering Gun.

  • Winterization: In freezing temperatures, disconnect the nozzle from the hose and store it indoors to prevent damage from ice expansion.
  • Avoid Dragging: Do not drag the nozzle along rough surfaces when moving the hose, as this can cause wear and tear to the exterior finish and internal components.
  • Clean Nozzle Head: Periodically check the nozzle head for mineral buildup or debris that might obstruct spray patterns. Clean with a soft brush and water if necessary.

Troubleshooting

Common Issues and Solutions:

  • Leaks at Hose Connection:
    • Ensure the nozzle is securely hand-tightened to the hose.
    • Check the rubber washer inside the nozzle's connection point. Replace if it is worn or missing.
  • Weak or Irregular Spray:
    • Verify that the water supply is fully open.
    • Check the nozzle head for any blockages or debris in the spray holes. Clean as described in the Maintenance section.
    • Ensure the hose is not kinked or obstructed.
  • Difficulty Changing Spray Patterns:
    • Ensure the nozzle head is clean and free of debris that might impede rotation.

Specifications

FeatureDetail
BrandOrbit
Model Number26700
MaterialMetal
Item Dimensions (L x W x H)2.36 x 4.33 x 7.48 inches
Item Weight0.01 ounces
ColorGrey and Blue
Inlet Connection TypeG Connector or SAE
Outlet Connection TypeG Connector or SAE
Number of Ports2
Valve TypeGlobe Valve

Warranty and Support

The Orbit S&M 26700 8 Jet Max Watering Gun comes with a Lifetime Warranty, reflecting its high strength and durability.

For warranty claims, technical support, or any product-related inquiries, please contact Orbit customer service. Refer to the product packaging or the official Orbit website for the most current contact information.

© 2025 Orbit. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.