BTICINO LEGRAND 344802 SWING Video Intercom User Manual
Model: 344802
1. Introduction
Welcome to the user manual for the BTICINO LEGRAND 344802 SWING 2-wire video intercom. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new video intercom system. Please read this manual thoroughly before attempting to install or operate the device.
The BTICINO LEGRAND 344802 SWING is designed to provide secure and convenient communication with visitors at your door. This model replaces the previous 344342 model, offering enhanced features and reliability.
2. Safety Information
Important Safety Instructions:
- Installation should only be performed by qualified personnel in accordance with local electrical codes and regulations.
- Always disconnect power before performing any installation, maintenance, or repair work.
- Do not expose the device to water, moisture, or extreme temperatures.
- Do not attempt to open or modify the device. This may void the warranty and pose a safety risk.
- Use only original accessories and spare parts provided or approved by BTICINO.
3. Package Contents
Please check the package contents carefully. If any items are missing or damaged, contact your supplier immediately.
- BTICINO LEGRAND 344802 SWING Indoor Monitor Unit
- Outdoor Door Station Unit (if included in kit)
- Mounting Bracket(s)
- Mounting Screws and Wall Plugs
- User Manual (this document)
4. Setup and Installation
This section guides you through the installation process of the BTICINO LEGRAND 344802 SWING video intercom system.
4.1 Pre-installation Checks
- Ensure all necessary tools are available (screwdriver, drill, wire strippers, etc.).
- Verify that the power supply to the installation area is disconnected.
- Confirm the existing wiring is a 2-wire system compatible with this unit.
4.2 Mounting the Indoor Monitor Unit
Select a suitable location indoors, typically near the main entrance, at eye level. Ensure there is access to the 2-wire bus connection.
- Mark the drilling points on the wall using the mounting bracket as a template.
- Drill holes and insert wall plugs.
- Secure the mounting bracket to the wall with screws.
- Connect the 2-wire bus and any other necessary wires (e.g., floor call button) to the terminals on the monitor unit. Refer to the wiring diagram provided with the product packaging.
- Carefully attach the monitor unit to the mounting bracket.
4.3 Mounting the Outdoor Door Station Unit
Install the outdoor unit at the main entrance, ensuring the camera has a clear view of visitors and the microphone/speaker are at an appropriate height.
- Mark and drill holes for the outdoor unit or its mounting box.
- Connect the 2-wire bus and any door lock release wires to the terminals on the outdoor unit. Ensure proper polarity.
- Secure the outdoor unit to the wall. Ensure it is weather-sealed if exposed to elements.
Figure 1: The BTICINO LEGRAND 344802 SWING video intercom indoor monitor unit. This image shows the sleek design of the indoor unit, typically mounted on a wall, featuring a screen and control buttons.
4.4 Initial Power-up and Configuration
- Once all units are securely mounted and wired, restore power to the system.
- The indoor monitor should power on. Follow any on-screen prompts for initial setup, such as language selection or basic system pairing.
- Test the system by pressing the call button on the outdoor unit to ensure the indoor monitor rings and displays video.
5. Operating Instructions
This section describes the basic functions and operation of your BTICINO LEGRAND 344802 SWING video intercom.
5.1 Receiving a Call
- When a visitor presses the call button on the outdoor unit, the indoor monitor will ring and display the visitor's image.
- Press the Answer button (often represented by a telephone icon) to establish two-way audio communication with the visitor.
5.2 Opening the Door
- During a call, or when viewing the outdoor unit, press the Door Release button (often represented by a key icon) to unlock the connected door or gate.
- The door will typically remain unlocked for a few seconds before re-locking automatically.
5.3 Monitoring the Outdoor Unit
- You can manually view the outdoor unit's camera feed at any time by pressing the Monitor button (often represented by a camera icon) on the indoor unit.
- This allows you to check outside without a visitor initiating a call.
5.4 Adjusting Settings
- Most indoor units have buttons or a menu for adjusting settings such as ringtone volume, display brightness, and contrast.
- Refer to the specific icons on your unit for these adjustments.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your video intercom system.
- Cleaning: Use a soft, dry cloth to clean the indoor monitor and outdoor unit. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device.
- Avoid Chemicals: Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surfaces and internal components.
- Lens Cleaning: Gently wipe the camera lens on the outdoor unit with a soft, lint-free cloth to ensure clear image quality.
- Connection Checks: Periodically check all wiring connections for tightness and signs of corrosion, especially on the outdoor unit.
7. Troubleshooting
If you encounter issues with your BTICINO LEGRAND 344802 SWING, refer to the following common problems and solutions before contacting technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Indoor monitor has no power/display. | No power supply; loose wiring. | Check the main power supply. Verify all 2-wire bus connections are secure. |
| No video from outdoor unit. | Camera wiring issue; damaged camera. | Check the 2-wire bus connections to the outdoor unit. Ensure the camera lens is clean. |
| No audio during a call. | Microphone/speaker wiring issue; volume too low. | Check audio connections. Adjust the volume settings on the indoor monitor. |
| Door release not working. | Door lock wiring issue; insufficient power to lock. | Verify the wiring to the electric door lock. Ensure the lock receives adequate power. |
| Poor image quality. | Dirty camera lens; poor lighting; display settings. | Clean the camera lens. Ensure adequate lighting at the outdoor unit. Adjust brightness/contrast on the indoor monitor. |
8. Specifications
Key technical specifications for the BTICINO LEGRAND 344802 SWING video intercom:
- Model: 344802 SWING
- Type: 2-Wire Video Intercom System
- Manufacturer: BTICINO
- ASIN: B06X3XB1Q9
- Replaces Model: 344342
- Power Supply: (Typically supplied by a dedicated power unit for the 2-wire bus system, consult installation diagram for specifics)
- Display: Black and White (as per product description)
- First Available Date: February 21, 2020
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. BTICINO products are covered by a standard manufacturer's warranty against defects in materials and workmanship.
If you require technical assistance or have questions not covered in this manual, please contact BTICINO customer support or your authorized installer.
