AL-KO GS 7.2 Li Cordless Multi-Cutter Instruction Manual

Introduction

The AL-KO GS 7.2 Li Cordless Multi-Cutter is a versatile, battery-powered tool designed for precise garden maintenance. It functions as both a grass edge trimmer and a shrub shear, making it ideal for maintaining lawn borders, small shrubs, bushes, and boxwood trees. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Safety Instructions

WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• Always wear appropriate personal protective equipment, including safety glasses, gloves, and sturdy footwear.
• Keep children and bystanders away while operating the tool.
• Do not operate the tool in wet conditions or near flammable liquids or gases.
• Ensure the battery is fully charged before use and only use the charger supplied by AL-KO.
• Disconnect the battery before cleaning, maintenance, or changing accessories.
• Inspect the blades for damage before each use. Replace damaged blades immediately.
• Store the tool in a dry, secure place out of reach of children.

Package Contents

Carefully unpack the box and ensure all items are present and undamaged.

• AL-KO GS 7.2 Li Multi-Cutter Unit
• Grass Trimmer Blade (80 mm working width)
• Shrub Shear Blade (160 mm working width)
• Battery (integrated)
• Battery Charger

Image: The AL-KO GS 7.2 Li Multi-Cutter unit, along with its interchangeable grass and shrub blades, and the battery charger.

Setup

1. Initial Battery Charging

Before first use, fully charge the battery.

1. Connect the charger to a standard power outlet.
2. Plug the charger cable into the charging port on the multi-cutter.
3. The LED charging indicator will illuminate, showing the charging status. Refer to the "Charging the Battery" section for details on LED indications.
4. Once fully charged, disconnect the charger.

2. Attaching/Changing Blades

The AL-KO GS 7.2 Li features interchangeable blades for different tasks. Always ensure the tool is switched off and the battery is disconnected before changing blades.

1. Locate the blade release mechanism, usually a button or lever, on the side or top of the tool near the blade assembly.
2. Press or slide the release mechanism to unlock the current blade.
3. Carefully remove the blade, holding it by the non-sharp edges.
4. Align the desired blade (grass or shrub) with the mounting points on the tool.
5. Push the blade firmly into place until it clicks, indicating it is securely locked.
6. Gently pull on the blade to ensure it is properly secured before use.

Operating Instructions

The AL-KO GS 7.2 Li is designed with an ergonomic SoftGrip handle for comfortable and controlled operation.

1. Turning On/Off

• To turn on: Press and hold the safety lock button (if present), then press the power trigger. Release the safety lock button once the tool is running.
• To turn off: Release the power trigger.

2. Using as a Grass Trimmer

Attach the grass trimmer blade (80 mm working width). This blade is ideal for precise trimming of lawn edges and small areas where a larger mower cannot reach.

• Hold the tool firmly with both hands, ensuring a comfortable grip on the SoftGrip handle.
• Position the blade parallel to the ground or the edge you wish to trim.
• Move the tool slowly and steadily along the grass edge. Avoid forcing the blade through thick patches.
• The integrated grass collection accessories help keep the work area tidy.

Image: A user demonstrating the AL-KO GS 7.2 Li Multi-Cutter in grass trimming mode, precisely cutting along a garden border.

3. Using as Shrub Shears

Attach the shrub shear blade (160 mm working width). This blade is suitable for shaping and trimming small shrubs, bushes, and boxwood trees.

• Hold the tool securely, maintaining good balance.
• Start trimming from the bottom of the shrub and work your way upwards, using smooth, sweeping motions.
• Do not attempt to cut branches thicker than the recommended cutting capacity (refer to specifications).
• Regularly clear cut material from the blades to prevent clogging.

Charging the Battery

The AL-KO GS 7.2 Li features an integrated battery with an LED charging indicator.

• Connect the charger to the tool's charging port.
• The LED indicator will show the charging status:
  • Red (Solid): Battery is charging.
  • Green (Solid): Battery is fully charged.
  • Red (Flashing): Charging error or battery temperature is too high/low. Disconnect and try again when the battery is at ambient temperature.
• Once fully charged, disconnect the charger to prevent overcharging and prolong battery life.

Maintenance

Regular maintenance ensures the longevity and efficient operation of your multi-cutter. Always disconnect the battery before performing any maintenance.

• Cleaning: After each use, clean the blades and housing with a damp cloth. Remove any sap, dirt, or debris. Do not use harsh chemicals or abrasive cleaners.
• Blade Care: Lightly oil the blades with a suitable machine oil after cleaning to prevent rust and ensure smooth operation. Store blades with their protective covers.
• Storage: Store the multi-cutter in a dry, well-ventilated area, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50%) for long-term storage.
• Battery Care: Do not store the battery in a completely discharged state. Recharge it periodically if stored for extended periods.

Troubleshooting

Specifications

Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official AL-KO website.

Should you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact AL-KO customer support. Contact details can typically be found on the AL-KO website or on your product packaging.

AL-KO Official Website: www.al-ko.com