Important Safeguards
Please read all instructions carefully before operating the humidifier. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always place the humidifier on a firm, flat, water-resistant surface.
- Do not place the humidifier near heat sources such as stoves, radiators, or direct sunlight.
- Do not block the mist output.
- Unplug the humidifier before filling, cleaning, or moving.
- Do not immerse the base in water or other liquids.
- Use only clean, cool tap water. Distilled water is recommended to prevent mineral buildup.
- Keep out of reach of children and pets.
Product Components
Familiarize yourself with the parts of your MistAire Studio Humidifier.
Image: Exploded view showing the Mist Output, 0.7 Liter Water Tank, Water Tank Cap, Cleaning Brush, Humidifier Base, Power & Night Light Button, and AC Power Adaptor.
- Mist Output: Where the cool mist is released.
- 0.7 Liter Water Tank: Holds the water for humidification.
- Water Tank Cap: Secures the water in the tank.
- Cleaning Brush: Used for maintenance.
- Humidifier Base: Contains the ultrasonic transducer and electronic components.
- Power & Night Light Button: Controls power and night light functions.
- AC Power Adaptor: Provides power to the unit.
Setup
Before First Use
- Remove all packaging materials.
- Place the humidifier on a flat, stable surface at least 6 inches away from walls and furniture.
Filling the Water Tank
- Ensure the humidifier is unplugged.
- Remove the water tank from the base.
- Unscrew the water tank cap.
- Fill the tank with clean, cool tap water. Distilled water is recommended to minimize mineral buildup. Do not fill past the MAX fill line.
- Securely screw the water tank cap back on.
- Place the filled water tank back onto the humidifier base, ensuring it is seated correctly.
Operating Instructions
Once the humidifier is set up and filled, you can begin operation.
Image: The MistAire Studio Humidifier emitting mist with its optional blue night light illuminated, demonstrating its quiet operation and overnight use capability.
Powering On/Off and Mist Settings
- Plug the AC power adapter into a wall outlet.
- Press the Power button once to turn the unit on to the High Mist setting.
- Press the Power button a second time for the Low Mist setting.
- Press the Power button a third time to turn the unit off.
Night Light Function
- To activate the optional night light, press and hold the Power button for 1.5 seconds while the unit is on.
- To turn off the night light, press and hold the Power button for 1.5 seconds again.
The humidifier features an automatic shut-off function that turns the unit off when the water level is low or the tank is removed.
Maintenance
Regular cleaning is essential for optimal performance and longevity of your humidifier.
Daily Maintenance
- Unplug the humidifier and empty any remaining water from the tank and base.
- Rinse the water tank and base with clean water.
- Allow all parts to air dry completely before reassembling or storing.
Weekly Cleaning (Mineral Buildup Removal)
- Unplug the humidifier.
- Remove the water tank and empty any water.
- Pour 1 cup of white vinegar into the base and let it soak for at least 30 minutes.
- Use the provided cleaning brush to gently scrub the ultrasonic disk and other areas of the base to remove mineral buildup.
- Rinse the base thoroughly with clean water until the vinegar smell is gone.
- Clean the water tank by adding 1 cup of white vinegar and filling the rest with water. Shake well and let it soak for 30 minutes, then rinse thoroughly.
- Allow all parts to air dry completely before reassembling.
Storage
When storing the humidifier for an extended period, ensure all parts are clean and completely dry. Store in a cool, dry place.
Troubleshooting
Refer to this table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist or low mist output | No water in tank; Mineral buildup on ultrasonic disk; Tank not seated correctly. | Refill water tank; Clean ultrasonic disk with brush and vinegar; Re-seat tank properly. |
| Unusual odor | Dirty water or tank; Stagnant water. | Empty and clean tank and base; Use fresh water daily. |
| Water leakage | Water tank cap not secured; Tank not seated correctly. | Tighten water tank cap; Re-seat tank properly. |
| Unit not turning on | Not plugged in; No water in tank (auto shut-off); Power adapter issue. | Ensure unit is plugged in; Fill water tank; Check power adapter connection. |
Specifications
Detailed technical specifications for the MistAire Studio Humidifier.
Image: Diagram showing the humidifier's dimensions: approximately 5 inches (12.7 cm) in width and 9 inches (22.9 cm) in height.
- Model Name: MistAire Studio
- Model Number: PEHUMSML
- Dimensions: 5.1"D x 5.1"W x 11.25"H
- Weight: 1.1 Pounds
- Water Tank Capacity: 0.7 Liters
- Run Time: Up to 12 hours (on low setting)
- Coverage Area: Up to 200 square feet
- Mist Settings: High and Low
- Special Features: Auto Shut-Off, Optional Night Light, Whisper-Quiet Operation
- Voltage: 120 Volts
- Wattage: 11 watts
- Included Components: AC power adapter, disk cleaning brush
Warranty and Support
Warranty Information
The Pure Enrichment MistAire Studio Humidifier comes with a 5-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use.
For full warranty details and registration, please refer to the official Pure Enrichment website or contact customer support.
Customer Support
If you have any questions, concerns, or require assistance with your product, please contact Pure Enrichment Customer Support. Contact information can typically be found on the product packaging or the official Pure Enrichment website.
Please have your model number (PEHUMSML) and purchase date available when contacting support.
