Valterra A04-5094BK RV Adjustable EZ Hose Carrier Instruction Manual

Introduction

The Valterra A04-5094BK RV Adjustable EZ Hose Carrier provides a functional storage solution for your RV's 3-inch drain hoses and fittings. This carrier is designed for easy installation and secure storage, helping to keep your RV's plumbing organized and protected. It features an adjustable length and lockable, vented end caps.

Product Features

• RV Hose Compatibility: Fits most 3-inch drain hoses and fittings, excluding one-piece 90-degree sewer fittings.
• Adjustable Length: Extends from 50 inches to 94 inches to accommodate various hose lengths and mounting locations.
• Vented End Caps: Features quarter-turn twist lock caps with rubber straps, designed with vents to prevent moisture buildup inside the carrier.
• Lockable Design: Each end cap includes a loop for adding a padlock (not included) for enhanced security.
• Easy Installation: Comes pre-assembled with fixed mounting brackets and includes self-tapping screws for straightforward setup.
• Versatile Storage: With an inside diameter of 4.45 inches, it can also store other items like fishing poles (without reels attached).

What's in the Box

• 1 x Valterra A04-5094BK RV Adjustable EZ Hose Carrier
• Pre-assembled mounting brackets
• Self-tapping screws for installation

Setup and Installation

The Valterra EZ Hose Carrier is designed for convenient installation on your RV. Follow these steps for proper setup:

1. Determine Mounting Location: Identify a suitable location on your RV's frame or bumper that allows for easy access and proper hose length accommodation. Ensure there is sufficient clearance.
2. Adjust Length: Extend or retract the hose carrier to the desired length (between 50 and 94 inches) to fit your specific RV and hose.
3. Secure Mounting Brackets: The carrier comes with pre-assembled mounting brackets. Use the included self-tapping screws to firmly attach the brackets to your RV's frame. For plastic underbelly installations, consider using washers on the backside of the mounting flange to prevent overtightening and damage.
4. Optional Center Support: For longer installations or to prevent sagging, a sliding saddle (included with 50-94 inch carriers) can be attached anywhere along the tube to provide additional center support. Secure it with a hose clamp and screw.

Image: Valterra A04-5094BK RV Adjustable EZ Hose Carrier installed beneath an RV, showing the black tube and end caps.

Installation Video Reference

Operating Instructions

Using the EZ Hose Carrier is straightforward:

1. Opening the Cap: To access your hose, twist the quarter-turn lock cap at either end of the carrier. The cap is tethered with a rubber strap to prevent loss.
2. Storing the Hose: After cleaning your RV sewer hose, collapse it and carefully slide it into the carrier. Ensure any fittings are properly aligned to fit within the 4.45-inch internal diameter.
3. Closing and Securing: Once the hose is inside, close the cap and twist to lock it. For added security, you can attach a padlock through the loop on the cap.

Image: Close-up of the vented, quarter-turn twist lock cap on the Valterra EZ Hose Carrier.

Maintenance

To ensure the longevity and proper function of your Valterra EZ Hose Carrier:

• Regular Cleaning: Periodically inspect and clean the inside of the carrier to remove any debris or residue.
• Cap Inspection: Check the end caps and rubber straps for any signs of wear or damage. Replace if necessary to maintain security and prevent moisture ingress.
• Mounting Hardware: Ensure all mounting screws and brackets remain tight. Re-tighten as needed to prevent the carrier from shifting during travel.
• Hose Preparation: Always rinse your sewer hose thoroughly before storing it in the carrier to minimize odors and maintain hygiene.

Troubleshooting

• Difficulty Opening/Closing Caps: Ensure the mounting screws are not overtightened, especially if installed on a plastic underbelly, as this can distort the carrier and make caps difficult to operate.
• Hose Not Fitting: Verify that your hose and fittings (excluding one-piece 90-degree sewer fittings) are compatible with the 4.45-inch inside diameter. Ensure the hose is fully collapsed before insertion.
• Carrier Sagging: If the carrier appears to sag, especially when fully extended or loaded, consider adding the optional sliding saddle for center support.
• Moisture Buildup: The caps are vented to prevent moisture. Ensure the vents are clear of obstructions. If excessive moisture persists, ensure hoses are as dry as possible before storage.

Specifications

Warranty and Support

For warranty information or customer support regarding your Valterra A04-5094BK RV Adjustable EZ Hose Carrier, please refer to the manufacturer's official website or contact their customer service department directly. Keep your purchase receipt for warranty claims.