Introduction
The Sea Gull Lighting Crittenden One Outdoor Wall Lantern (Model 8538501-12) is a durable, all-aluminum outdoor lighting fixture designed with a modern aesthetic. It features a cone-shaped design that purposefully directs light downward, contributing to Dark Sky guidelines by limiting upward light spill. This fixture is suitable for both damp and wet environments, making it ideal for various outdoor applications. It is cETL listed for safety and meets Title 24 energy efficiency standards when used with Joint Appendix (JA8) approved light bulbs.
Safety Information
- Always turn off the electrical supply at the main fuse or circuit breaker box before beginning installation or any maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- Use only the specified bulb type and wattage to avoid overheating and potential fire hazards.
- Do not connect this fixture to an ungrounded electrical system.
- Ensure all electrical connections are secure and properly insulated.
- This fixture is designed for outdoor use and is waterproof. However, proper installation is crucial to maintain its integrity.
Package Contents
Verify that all components are present before beginning installation:
- One (1) Crittenden One Outdoor Wall Lantern fixture (Model 8538501-12)
- Mounting hardware kit
- Instruction sheet
Note: One A19 Medium 75-watt light bulb (E26 base) is required but not included with the fixture.
Setup and Installation
This fixture is designed for hardwired, wall-mount installation. No assembly is required for the fixture itself, only mounting and wiring.
- Prepare for Installation: Turn off power at the circuit breaker or fuse box to prevent electrical shock.
- Mounting Bracket Installation: Secure the provided mounting bracket to the electrical junction box on your wall. Ensure it is firmly attached.
- Electrical Connections:
- Connect the fixture's ground wire to the house ground wire (usually bare copper or green) using a wire nut.
- Connect the fixture's neutral wire (usually white) to the house neutral wire (white) using a wire nut.
- Connect the fixture's hot wire (usually black) to the house hot wire (black) using a wire nut.
- Carefully tuck all wires into the junction box.
- Fixture Mounting: Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the wall and stable.
- Bulb Installation: Screw one A19 Medium 75-watt (maximum) bulb with an E26 base into the fixture's socket. LED equivalent bulbs are recommended for energy efficiency and Title 24 compliance.
- Restore Power: Turn the electrical supply back on at the circuit breaker or fuse box.
Image: Crittenden One Outdoor Wall Lantern installed on a white brick wall, demonstrating its downward light direction.
Image: Front view of the Crittenden One Outdoor Wall Lantern, highlighting its design and light distribution.
Video: Official product overview of the Sea Gull Lighting Crittenden One Light Outdoor Wall Lantern, demonstrating its features and design.
Operating Instructions
The Crittenden One Outdoor Wall Lantern operates via a standard wall switch (toggle type) connected to its hardwired power source. If connected to a compatible dimmer switch and equipped with a dimmable E26 base bulb, the light output can be adjusted.
- Turning On/Off: Use the wall switch to control the power to the fixture.
- Dimming (Optional): If a dimmer switch is installed and a dimmable bulb is used, adjust the dimmer control to achieve the desired light level.
- Smart Control (Optional): While the fixture itself does not have integrated smart control, it can be controlled via an app if connected to a compatible smart switch or smart bulb system.
Maintenance
- Cleaning: To clean the fixture, ensure the power is off and the fixture is cool. Wipe with a soft, dry, or slightly damp cloth. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement:
- Turn off the power to the fixture at the circuit breaker.
- Allow the bulb to cool completely.
- Carefully unscrew the old bulb from the E26 base socket.
- Screw in a new A19 Medium 75-watt (maximum) bulb or an equivalent LED bulb.
- Restore power to the fixture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Bulb is faulty or loose. Incorrect wiring. | Check circuit breaker. Replace or tighten bulb. Verify wiring connections (consult electrician if needed). |
| Light flickers. | Loose bulb or wiring connection. Incompatible dimmer switch or bulb. | Tighten bulb or check wiring. Ensure dimmer and bulb are compatible (use dimmable LED bulbs with LED-compatible dimmers). |
| Reduced light output. | Low wattage bulb. Dimmer setting too low. | Install a higher wattage bulb (up to 75W max) or a brighter LED equivalent. Adjust dimmer to a higher setting. |
Specifications
- Brand: Sea Gull Lighting (by Generation Lighting)
- Model Number: 8538501-12
- Product Dimensions: 10"L x 11.38"W x 8.5"H
- Item Weight: 2 Pounds
- Material: Aluminum
- Finish: Black Finish
- Voltage: 120 Volts
- Wattage: 75 watts (maximum)
- Bulb Base: E26
- Number of Light Sources: 1
- Indoor/Outdoor Usage: Outdoor (suitable for damp and wet locations)
- Water Resistance Level: Waterproof
- Special Features: Dimmable (with compatible dimmer and bulb)
- Certifications: cETL listed, Meets Title 24 energy efficiency standards (with JA8 approved bulbs)
- UPC: 785652002694
Warranty
This product comes with a Limited Warranty. Specific terms and conditions are not detailed in this manual. For full warranty information, please refer to the manufacturer's official website or contact customer support.
Support
For technical assistance, replacement parts, or warranty inquiries, please contact Generation Lighting customer support. Refer to the official Generation Lighting website for current contact information.