Meridian Furniture Aiden Collection Queen Grey Velvet Upholstered Bed

Introduction

Thank you for choosing the Meridian Furniture Aiden Collection Queen Grey Velvet Upholstered Bed. This manual provides comprehensive instructions for the safe assembly, proper use, and effective maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

• Always assemble the bed on a soft, clean surface to prevent damage to the product or your flooring.
• Ensure all bolts and screws are securely tightened before using the bed. Periodically check and re-tighten as necessary.
• Do not stand or jump on the bed frame.
• Keep small parts away from children during assembly to prevent choking hazards.
• Use only the recommended mattress size (Queen) for this bed frame.
• Do not use power tools for assembly unless specifically instructed, as overtightening can damage components.

Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Headboard (Grey Velvet Fabric, Deep Detailed Tufting, Chrome Nailheads)
• Footboard
• Side Rails (2)
• Chrome Legs (4)
• Full Slats (Box Spring Not Required)
• Hardware Pack (screws, bolts, washers, Allen wrench)

Image: Overall dimensions of the bed frame, including headboard height (56" H), length (86" D), and width (72" W).

Assembly Instructions

Assembly is required for this bed frame. It is recommended to have two people for assembly. Please follow these steps carefully:

1. Unpack Components: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches.
2. Attach Legs to Footboard: Secure the chrome legs to the footboard using the provided hardware. Ensure they are tightly fastened.
3. Attach Side Rails to Headboard and Footboard: Connect the side rails to both the headboard and footboard. Ensure the chrome nailhead details on the headboard are facing outwards. Use the provided bolts and Allen wrench to secure these connections. Do not fully tighten until all connections are made.
4. Install Slats: Place the full slats across the width of the bed frame, resting them on the support ledges of the side rails. Secure the slats using the provided screws. The slats eliminate the need for a box spring.
5. Final Tightening: Once all components are in place, go back and securely tighten all bolts and screws.

Image: The bed frame with its full slat system, designed to support a mattress without a box spring.

Image: Detail of the chrome legs and the velvet upholstery on the bed frame's base.

Operating Instructions

Your Meridian Furniture Aiden Collection bed is designed for comfort and style. Once assembled, place your Queen-sized mattress directly onto the provided slats. A box spring is not required due to the full slat support system. The extra-tall headboard with deep button tufting and decorative nailhead trim provides a comfortable backrest for reading or lounging.

Image: The fully assembled bed, showcasing its elegant design and velvet upholstery.

Image: Detailed view of the headboard's tufted velvet fabric.

Maintenance

To ensure the longevity and appearance of your upholstered bed, follow these maintenance guidelines:

• Velvet Fabric: Regularly vacuum the velvet upholstery using a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
• Chrome Legs and Nailheads: Wipe chrome surfaces with a soft, damp cloth to remove fingerprints and dust. Avoid abrasive cleaners that can scratch the finish.
• Wood Frame: Clean the solid wood frame with a soft, dry cloth. Avoid harsh chemicals.
• General Care: Keep the bed away from direct sunlight and heat sources to prevent fading and material degradation.

Troubleshooting

If you encounter any issues with your bed frame, please refer to the following common solutions:

• Squeaking Noises: Check all bolts and screws for tightness. Re-tighten any loose connections. Ensure slats are properly seated and secured.
• Unstable Frame: Verify that all legs are evenly touching the floor and that all frame connections are secure. Adjust if necessary.
• Damaged Upholstery: For minor scuffs or marks, gently brush the velvet in one direction. For significant damage, contact customer support or a professional repair service.

Specifications

Warranty and Support

For warranty information, please refer to the product description or the store page where you purchased this item. For customer support or assistance with missing/damaged parts, please contact the seller, OJCommerce, directly. Their return policy allows for 90-day easy returns.

Seller: OJCommerce

Return Policy: 90-day easy returns