1. Product Overview
The Westbrass Illusionary Overflow Bath Drain, Model D594PRK-07, is a plumber's pack designed for bathtub drainage systems. It features a modern no-hole illusionary overflow cover and a lift-and-turn drain mechanism. This pack includes essential PVC components for solvent weld installation, providing a clean aesthetic and reliable function for your bathtub.
Image 1.1: Overview of the Westbrass Illusionary Overflow Bath Drain components in Satin Nickel.
2. Components Included
This plumber's pack contains the following items:
- Two-hole top elbow (Sch. 40 PVC)
- Coarse thread bottom elbow (Sch. 40 PVC)
- No-Hole Illusionary overflow cover (Satin Nickel)
- Lift and Turn strainer and closure (Satin Nickel)
- Gaskets and fasteners for assembly
Note: Connecting pipes and the tee fitting are not included in this pack and must be sourced separately to complete the installation.
Image 2.1: Detailed view of all components included in the plumber's pack.
3. Setup and Installation
Installation of the Westbrass Illusionary Overflow Bath Drain requires standard plumbing practices and tools. It is recommended that installation be performed by a qualified professional.
3.1 Tools and Materials Required (Not Included):
- PVC primer and cement
- Measuring tape
- PVC pipe cutter
- Screwdriver
- Adjustable wrench
- Plumber's putty or silicone sealant
- Appropriate Schedule 40 PVC pipes and tee fitting
3.2 Installation Steps:
- Prepare the Bathtub: Ensure the bathtub overflow and drain openings are clean and free of debris.
- Assemble Overflow: Attach the two-hole top elbow to the bathtub's overflow opening. Secure the illusionary overflow cover to the elbow using the provided fasteners and gasket. Ensure a watertight seal.
- Install Drain Shoe: Apply plumber's putty or silicone sealant around the underside of the lift and turn drain flange. Insert the drain into the bathtub's drain opening from above. From below, attach the coarse thread bottom elbow to the drain body, ensuring the gasket is properly seated and tightened securely.
- Connect PVC Piping: Measure and cut the necessary lengths of Schedule 40 PVC pipe to connect the top overflow elbow, the bottom drain elbow, and the tee fitting (not included). Dry-fit all components to ensure proper alignment and fit.
- Solvent Weld Connections: Apply PVC primer to all mating surfaces, followed by PVC cement. Quickly assemble the connections, ensuring a firm and complete bond. Allow adequate curing time as per the cement manufacturer's instructions.
- Test for Leaks: Once the cement has cured, fill the bathtub with water and check all connections for leaks. Address any leaks immediately.
Image 3.1: Technical drawing illustrating the assembly and connection points for the bath drain components.
Image 3.2: Exploded view showing the arrangement of components for installation into a bathtub.
4. Operating Instructions
The Westbrass Illusionary Overflow Bath Drain features a simple lift-and-turn mechanism for opening and closing the drain.
4.1 To Close the Drain:
Grasp the knob on the drain stopper, twist it clockwise, and push it down firmly. This will create a positive seal, allowing the bathtub to fill with water.
4.2 To Open the Drain:
Grasp the knob on the drain stopper, twist it counter-clockwise, and pull it up. This will release the seal and allow water to drain from the bathtub.
Image 4.1: The Lift and Turn drain stopper in the closed position.
Image 4.2: The Lift and Turn drain stopper in the open position.
5. Maintenance
Regular maintenance will ensure the longevity and proper function of your bath drain.
5.1 Cleaning the Drain and Overflow:
- Drain Stopper: Periodically remove the lift and turn stopper by pulling it up and out. Clean any hair or debris accumulated around the stopper and inside the drain opening. Rinse with water and reinsert.
- Overflow Faceplate: The illusionary overflow faceplate can be cleaned by wiping it with a soft cloth and a mild, non-abrasive cleaner. If clogging occurs behind the faceplate, it can be removed by unscrewing the fasteners to access the overflow elbow for cleaning.
5.2 Finish Care:
To maintain the Satin Nickel finish, clean with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
6. Troubleshooting
If you encounter issues with your bath drain, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow Drainage | Hair or debris in drain; partial clog in plumbing. | Remove drain stopper and clean thoroughly. Use a plumbing snake or chemical drain cleaner if the clog is further down the pipe (follow product instructions carefully). |
| Drain Does Not Seal Properly | Debris under stopper; stopper mechanism faulty; worn gasket. | Clean under the stopper. Ensure the stopper is fully engaged by twisting and pushing down. Inspect the stopper's gasket for wear and replace if necessary. |
| Leakage Around Drain or Overflow | Improperly sealed connections; loose fittings; damaged gaskets. | Check all connections for tightness. If solvent-welded connections are leaking, professional repair or replacement may be required. Ensure gaskets are correctly seated and undamaged. Reapply plumber's putty or silicone if needed around the drain flange. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | D594PRK-07 |
| Brand | Westbrass |
| Material | Brass (drain stopper), Polyvinyl Chloride (PVC elbows) |
| Color/Finish | Satin Nickel (trim), White (PVC) |
| Size | Sch 40 PVC (1-1/2 inch) |
| Item Dimensions (L x W x H) | 4.25 x 3.12 x 1.5 inches (approximate, for individual components) |
| Item Weight | 1.6 Pounds |
| Connector Type | Elbow (for PVC connections) |
| UPC | 747028493918 |
8. Warranty Information
This Westbrass product is covered by a 1 Year Limited Warranty from the date of purchase. This warranty covers defects in material and workmanship under normal use and service. For specific terms and conditions, please refer to the official Westbrass warranty documentation or contact customer support.
9. Support and Contact
For technical assistance, replacement parts, or warranty claims, please contact Westbrass customer support. Have your product model number (D594PRK-07) and date of purchase available when contacting support.
Westbrass Contact Information:
Please refer to the official Westbrass website or product packaging for the most current contact details, including phone numbers and email addresses.
Online Resources:
Visit the Westbrass website for additional product information, FAQs, and support resources.