IKEA E12

IKEA E12 400 Lumen 5 Watt LED Light Bulb Instruction Manual

Comprehensive guide for the installation, operation, and maintenance of your IKEA E12 LED light bulb.

Product Overview

The IKEA E12 LED light bulb provides energy-efficient illumination with a warm white glow. Designed for longevity and consistent performance, it's an ideal replacement for traditional incandescent bulbs.

IKEA E12 400 Lumen LED Light Bulb in packaging

Image: The IKEA E12 400 Lumen LED Light Bulb, shown in its retail packaging. The packaging highlights key features such as 60W equivalent, 800 lumens, 2700K warm white light, and 25,000 hours lifespan.

Key Features

  • Energy Efficient: 5 Watt LED equivalent to a 40 Watt incandescent bulb.
  • Long Lifespan: Approximately 25,000 hours of operation.
  • Warm White Light: Emits a comfortable 2,700 Kelvin color temperature.
  • High Color Rendering: CRI of 90 for accurate color reflection.
  • Instant Full Power: Illuminates immediately without delay.
  • Durable Design: Plastic casing withstands temperatures from -4°F to 104°F (-20°C to +40°C).
  • Non-Dimmable: Designed for standard on/off functionality.

Setup

Safety Instructions

  • Ensure power is turned off at the main switch before installation.
  • Do not use with dimmer switches, as this bulb is non-dimmable.
  • Handle the bulb by its base to avoid touching the glass or plastic dome.
  • Do not disassemble or modify the bulb.
  • For indoor use only.

Installation

  1. Turn off Power: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off power at the circuit breaker.
  2. Remove Old Bulb (if applicable): If replacing an existing bulb, allow it to cool completely before carefully unscrewing it counter-clockwise.
  3. Insert New Bulb: Gently screw the IKEA E12 LED bulb into the E12 socket by turning it clockwise until it is snug. Do not overtighten.
  4. Restore Power: Turn the power back on at the circuit breaker, then use the light fixture's switch to test the bulb.

Operating Instructions

The IKEA E12 LED light bulb operates like a standard light bulb. Simply use the light fixture's switch to turn the light on or off.

  • On/Off Functionality: This bulb is designed for simple on/off operation.
  • Instant Illumination: The bulb will reach full brightness immediately upon activation.
  • Non-Dimmable: This bulb is not compatible with dimmer switches. Using it with a dimmer may cause damage to the bulb or the dimmer.

Maintenance

Cleaning

  • Ensure the power is off and the bulb is cool before cleaning.
  • Wipe the bulb with a soft, dry cloth.
  • Do not use liquid cleaners or abrasive materials, as these can damage the bulb.

Storage

  • Store unused bulbs in their original packaging in a cool, dry place.
  • Avoid extreme temperatures and humidity.

Troubleshooting

ProblemPossible CauseSolution
Bulb does not light up.No power to the fixture, loose connection, or faulty bulb.Check power switch and circuit breaker. Ensure bulb is screwed in tightly. Test with another working bulb if available.
Bulb flickers or buzzes.Incompatible dimmer switch or loose connection.This bulb is non-dimmable; remove from dimmer circuit. Ensure connections are secure.
Light output is too low.Incorrect bulb for desired brightness.Verify the lumen output (400 lm) meets your requirements.

Specifications

BrandIKEA
Model NumberE12
Light TypeLED
Wattage5 Watts
Incandescent Equivalent40 Watts
Brightness400 Lumens
Bulb BaseE12
Light ColorWarm White
Color Temperature2700 Kelvin
Color Rendering Index (CRI)90
Special FeatureNon-Dimmable
Average Life25,000 Hours
Voltage100 to 120 Volts
Frequency60 Hertz
MaterialPlastic, Iron
Indoor/Outdoor UsageIndoor
Product Dimensions3.25"W x 1.8"H
Item Weight1.76 ounces

Warranty and Support

Warranty Information

This IKEA LED light bulb is designed for durability and long-lasting performance. For specific warranty details, please refer to the information provided at the point of purchase or visit the official IKEA website.

Customer Support

Should you encounter any issues or have questions regarding your IKEA E12 LED light bulb, please contact IKEA customer support through their official channels. Keep your purchase receipt handy for any warranty claims or support inquiries.

Related Documents - E12

Preview IKEA TRÅDFRI LED Bulb: Pairing and Usage Guide
Learn how to pair and use your IKEA TRÅDFRI wireless dimmable LED bulb. This guide covers setup, troubleshooting, and technical specifications for the TRÅDFRI smart lighting system.
Preview IKEA TRÅDFRI Smart Lighting: Pairing and Features Guide
Comprehensive guide to IKEA TRÅDFRI smart lighting, covering pairing instructions, color and white tone options, technical specifications, and responsible disposal. Supports multiple languages.
Preview IKEA TRÅDFRI LED Bulb GU10: Wireless Dimmable Colour & White Spectrum (LED1923R5, LED2110R3)
Explore the IKEA TRÅDFRI LED bulb (GU10) for wireless, dimmable lighting with customizable colour and white spectrum. Control your home's ambiance with smart features. Model numbers: LED1923R5, LED2110R3.
Preview IKEA TRÅDFRI Smart Lighting Instructions
This document provides instructions for pairing and using IKEA TRÅDFRI smart lighting devices, including technical specifications and safety information.
Preview IKEA TRÅDFRI LED2201G8 Smart Wireless LED Bulb Instructions
User guide for the IKEA TRÅDFRI LED2201G8 smart wireless dimmable LED bulb. Learn how to pair it with IKEA steering devices, control lighting, and find technical specifications and disposal information.
Preview IKEA RODRET Smart Lighting Guide
This guide provides instructions for setting up and using the IKEA RODRET smart lighting system, including pairing with the DIRIGERA hub and using the IKEA Home smart app.