COSTWAY Adjustable Swivel Bar Stools (Set of 2) - White Instruction Manual

1. Introduction

Thank you for choosing the COSTWAY Adjustable Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions thoroughly before use and retain them for future reference.

Image 1.1: Two white COSTWAY adjustable swivel bar stools.

These bar stools feature a modern design with a comfortable PU leather seat and backrest, a sturdy metal frame, and a chrome finish. Key functionalities include 360-degree swivel and pneumatic adjustable height, making them suitable for various counter and bar heights.

2. Safety Information

• Weight Limit: Do not exceed the maximum weight capacity of 330 lbs (150 kg) per stool. Exceeding this limit may result in damage to the product or personal injury.
• Stability: Always ensure the stool is placed on a flat, stable surface before sitting. Avoid leaning excessively or standing on the stool.
• Assembly: Follow all assembly instructions carefully. Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten fasteners as needed.
• Children: Keep children away from the assembly area. Do not allow children to play on or with the bar stools without adult supervision.
• Movement: When moving the stool, lift it rather than dragging to prevent damage to the floor or the stool's base.

Failure to adhere to these safety guidelines may result in injury or product damage.

3. Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer service for assistance.

• 2 x Bar Stool Seats with Backrests
• 2 x Gas Lift Cylinders
• 2 x Footrests
• 2 x Round Bases
• 1 x Instruction Manual
• 1 x Accessory Pack (screws, washers, Allen wrench, etc.)

4. Assembly Instructions

Assembly is required. It is recommended to assemble the stools on a soft, clean surface to prevent scratching.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface.
2. Attach Gas Lift to Base: Insert the gas lift cylinder into the center hole of the round base. Ensure it is seated firmly.
3. Install Footrest: Slide the footrest ring over the top of the gas lift cylinder. Secure it in place according to the instructions provided in the accessory pack (usually with a set screw).
4. Attach Seat to Gas Lift: Align the mounting plate on the underside of the seat with the top of the gas lift cylinder. Carefully lower the seat onto the gas lift, ensuring it clicks into place.
5. Secure Seat (if applicable): Some models may require screws to secure the seat to the gas lift mechanism. Refer to the specific diagrams in your accessory pack for details.
6. Test Functionality: Once assembled, gently sit on the stool and test the height adjustment and swivel functions to ensure proper operation and stability.

5. Operating Instructions

5.1. Adjusting Height

The bar stool features a pneumatic height adjustment mechanism. To adjust the height:

• To Raise: While standing, pull the lever located under the seat upwards. The seat will automatically rise. Release the lever at the desired height.
• To Lower: While seated, pull the lever located under the seat upwards. The seat will lower under your weight. Release the lever at the desired height.

Image 5.1: Adjustable height and 360-degree swivel mechanism.

5.2. Swivel Function

The seat is designed to swivel 360 degrees for ease of movement and access. Simply rotate the seat in any direction while seated or standing.

Image 5.2: Footrest for user comfort.

6. Maintenance

• Cleaning: Wipe the PU leather seat and backrest with a damp cloth. For stubborn stains, use a mild soap solution and then wipe dry. Avoid harsh chemicals or abrasive cleaners.
• Frame Care: Clean the chrome metal frame with a soft, dry cloth. For smudges or fingerprints, a glass cleaner can be used sparingly, followed by a dry wipe.
• Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
• Floor Protection: The base includes a rubber ring to protect your floors. Ensure this ring is intact and clean to prevent scratches.

7. Troubleshooting

• Stool is Wobbly:
  • Ensure all assembly screws and bolts are securely tightened.
  • Verify the stool is on a flat, even surface.
  • Check if the gas lift is properly inserted into the base and seat mechanism.
• Height Adjustment Not Working:
  • Ensure the lever is fully engaged when attempting to adjust the height.
  • Check for any obstructions around the gas lift mechanism.
  • If the gas lift is completely unresponsive, it may need replacement. Contact customer service.
• Difficulty Swiveling:
  • Check for any debris or obstructions between the seat and the gas lift mechanism.
  • Ensure the seat is properly attached and not binding.

8. Specifications

Image 8.1: Bar stool dimensions.

9. Warranty and Support

For any questions, concerns, or issues regarding your COSTWAY Bar Stools, please contact COSTWAY customer service. Please have your model number (53840WH-CYWH) and purchase information ready when contacting support.

Refer to your purchase documentation for specific warranty details and terms.