LIGHTACCENTS Sphere Bedside Table Lamp Instruction Manual

Important Safety Instructions

Please read and understand all instructions before assembling and using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the power is disconnected before installation, cleaning, or replacing the bulb.
• This lamp is designed for indoor use only. Do not expose to water or high humidity.
• Use only bulbs of the specified type and wattage. The included LED bulb is 6W. If replacing, do not exceed 40W for a medium base (E26) type A15 or G45 bulb.
• Do not operate the lamp with a damaged cord or plug. If damaged, contact a qualified electrician for repair.
• Keep the lamp away from flammable materials.
• Do not attempt to modify the lamp in any way.

Package Contents

Verify that all components are present and undamaged before proceeding with assembly.

• 1x Bedside Lamp Base (Natural Pine Wood)
• 1x Opal Glass Shade (Sphere)
• 1x 6W LED Bulb (E26 Medium Base)
• 1x 5-Foot Power Cord with Inline On/Off Rocker Switch
• 1x User Manual (This Document)

Setup Instructions

Follow these steps to assemble your LIGHTACCENTS Sphere Bedside Table Lamp:

1. Unpack Components: Carefully remove all items from the packaging. Place them on a clean, flat, and stable surface.
   

   Image: All components of the LIGHTACCENTS Sphere Bedside Table Lamp, including the wooden base, glass shade, and LED bulb.

2. Install the LED Bulb: Gently screw the provided 6W LED bulb into the lamp's socket located on the wooden base. Ensure it is securely tightened but do not overtighten.
   

   Image: A detailed view highlighting the E26 bulb socket on the wooden base and the inline on/off rocker switch on the power cord.

3. Place the Glass Shade: Carefully place the opal glass sphere shade over the bulb and onto the wooden base. Ensure it sits evenly and securely.
4. Connect to Power: Plug the lamp's power cord into a standard 120V AC electrical outlet.

Operating Instructions

To operate your LIGHTACCENTS Sphere Bedside Table Lamp:

• Turning On/Off: Locate the inline rocker switch on the power cord. Press one side of the switch to turn the lamp ON, and the other side to turn it OFF.
• Bulb Replacement: Before replacing the bulb, ensure the lamp is unplugged from the power outlet and the bulb has cooled down. Unscrew the old bulb and screw in a new E26 medium base bulb, not exceeding 40W.

Maintenance

Proper care will ensure the longevity and appearance of your lamp:

• Cleaning the Glass Shade: Disconnect power before cleaning. Wipe the glass shade with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners or chemicals that may damage the finish.
• Cleaning the Wooden Base: Wipe the wooden base with a soft, dry cloth. Do not use water or liquid cleaners directly on the wood.
• General Care: Periodically check the power cord for any signs of damage. Ensure the lamp is placed on a stable surface to prevent tipping.

Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Warranty and Support

LIGHTACCENTS products are manufactured with quality and durability in mind. For specific warranty information, please refer to the documentation included with your purchase or visit the official LIGHTACCENTS website.

If you require technical assistance, have questions about your product, or need to report a defect, please contact LIGHTACCENTS customer support through their official channels. Contact details can typically be found on the product packaging or the brand's website.

For more information, you may visit the LIGHTACCENTS Store on Amazon.