1. Introduction
This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of the Origin Battery Replacement Kit for the APC SU5000R5XLT-TF3 Uninterruptible Power Supply (UPS). This kit is designed to meet or exceed the original equipment manufacturer (OEM) specifications, ensuring reliable performance for your UPS system.
The kit includes eight (8) OR-1270F2 12V 7AH Sealed Lead Acid (SLA) batteries, specifically of the AGM HR series, which are non-spillable and maintenance-free.
2. Safety Information
WARNING: Improper handling of batteries can result in serious injury or damage. Always follow these safety guidelines.
- Wear Protective Gear: Always wear safety glasses and insulated gloves when handling batteries.
- Avoid Short Circuits: Do not allow metal objects to contact both battery terminals simultaneously. This can cause sparks, fire, and severe burns.
- No Open Flames: Keep batteries away from open flames, sparks, and heat sources.
- Proper Ventilation: Ensure adequate ventilation during installation and operation.
- Keep Out of Reach of Children: Batteries contain hazardous materials.
- Non-Spillable Design: These are Sealed Lead Acid (SLA) batteries and are non-spillable. However, avoid puncturing or damaging the battery casing.
- Refer to UPS Manual: Always consult the APC SU5000R5XLT-TF3 UPS user manual for specific safety instructions related to your UPS model.
3. Package Contents
The Origin Battery APC SU5000R5XLT-TF3 Replacement Battery Kit includes:
- Eight (8) OR-1270F2 12V 7AH Sealed Lead Acid (SLA) Batteries
Image 1: Eight OR-1270F2 12V 7AH SLA batteries included in the replacement kit. These batteries are designed for high-rate discharge applications.
4. Specifications
| Feature | Description |
|---|---|
| Battery Model | OR-1270F2 |
| Voltage | 12 Volts |
| Capacity | 7 Ampere-hours (AH) |
| Battery Type | Sealed Lead Acid (SLA), AGM (Absorbent Glass Mat), HR Series, Non-Spillable |
| Terminal Type | F2 |
| Dimensions (per battery) | Length: 5.94 inches (15.09 cm) Width: 2.56 inches (6.50 cm) Height: 3.72 inches (9.45 cm) |
| Weight (per battery) | Approximately 5.39 lbs (2.44 kg) |
| Certifications | Approved for transport by air (DOT, IATA, FAA, CAB certified), UL recognized (MH 20845), CE certified |
| UPC | 095056235926 |
Image 2: Detailed view of a single OR-1270F2 battery, highlighting its dimensions and weight. Note the F2 terminal type.
5. Installation Guide
IMPORTANT: Before proceeding, ensure you have read and understood the Safety Information section (Section 2) and the APC SU5000R5XLT-TF3 UPS user manual.
- Prepare for Installation:
- Gather necessary tools: Phillips head screwdriver, insulated gloves, safety glasses.
- Ensure the work area is clean, dry, and well-ventilated.
- Power Down the UPS:
- Safely shut down all connected equipment.
- Turn off the APC SU5000R5XLT-TF3 UPS using its power button.
- Disconnect the UPS from the AC wall outlet.
- Access Battery Compartment:
- Locate the battery access panel on your APC SU5000R5XLT-TF3 UPS. Refer to your UPS manual for exact location and removal instructions.
- Carefully remove any screws or latches securing the panel.
- Remove Old Batteries:
- Disconnect the battery cables from the old battery pack, noting the polarity (positive to positive, negative to negative).
- Carefully slide out the old battery pack. Batteries can be heavy; use proper lifting techniques.
- Install New Batteries:
- Slide the new Origin Battery OR-1270F2 batteries into the battery compartment. Ensure they are correctly oriented.
- Connect the battery cables to the new battery pack, ensuring correct polarity. Double-check all connections for tightness.
- Secure Battery Compartment:
- Replace the battery access panel and secure it with screws or latches.
- Reconnect and Power On:
- Reconnect the UPS to the AC wall outlet.
- Turn on the APC SU5000R5XLT-TF3 UPS.
- Allow the UPS to charge the new batteries for at least 24 hours to achieve full capacity before relying on them for extended backup.
6. Maintenance
The OR-1270F2 batteries are maintenance-free. However, following these guidelines can help prolong their lifespan:
- Environmental Conditions: Operate the UPS in a cool, dry environment. Extreme temperatures can reduce battery life.
- Regular Charging: Ensure the UPS remains connected to AC power to keep the batteries fully charged. Avoid prolonged storage in a discharged state.
- Visual Inspection: Periodically inspect the battery compartment for any signs of damage, corrosion, or swelling. If any issues are observed, contact support.
- Terminal Cleanliness: Keep battery terminals clean and free of dust or corrosion.
7. Troubleshooting
If you encounter issues after installing the new battery kit, consider the following:
- UPS Not Powering On:
- Verify that the UPS is properly connected to a live AC outlet.
- Ensure all battery connections are secure and correctly polarized.
- Check the UPS's circuit breaker (if applicable).
- Short Battery Runtime:
- Allow the batteries to charge for at least 24 hours after installation.
- Ensure the UPS is not overloaded. Refer to your UPS manual for capacity limits.
- If batteries are old, they may be nearing the end of their service life.
- UPS Alarms or Error Codes:
- Consult your APC SU5000R5XLT-TF3 UPS user manual for specific alarm codes and their resolutions.
- A battery replacement alarm may need to be reset manually on some UPS models.
If troubleshooting steps do not resolve the issue, contact Origin Battery customer support.
8. Warranty Information
The Origin Battery APC SU5000R5XLT-TF3 Replacement Battery Kit is covered by a Two-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims or inquiries, please retain your proof of purchase and contact Origin Battery customer support.
Note: The warranty does not cover damage caused by improper installation, misuse, neglect, or unauthorized modifications.
9. Battery Disposal
ENVIRONMENTAL NOTICE: Do not dispose of batteries in household waste. Batteries contain materials that can be harmful to the environment if not disposed of properly.
These Sealed Lead Acid batteries are recyclable. Please dispose of them according to local regulations. Many electronics retailers and recycling centers offer battery recycling services. Contact your local waste management authority for information on proper battery recycling in your area.
10. Support
For further assistance, technical support, or warranty inquiries regarding your Origin Battery Replacement Kit, please contact Origin Battery customer service.
Please have your product model (SU5000R5XLT-TF3) and proof of purchase ready when contacting support.