TOORUN M26

TOORUN M26 Bluetooth Earpiece User Manual

Model: M26

Introduction

Thank you for choosing the TOORUN M26 Bluetooth Earpiece. This manual provides detailed instructions for setting up, operating, and maintaining your new wireless headset. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

TOORUN M26 Bluetooth Earpiece, front view with '2 DEVICES MULTIPOINT CONNECTION' label

Figure 1: TOORUN M26 Bluetooth Earpiece, showcasing its multipoint connection capability.

Product Overview

Familiarize yourself with the components and controls of your TOORUN M26 Bluetooth Earpiece.

Diagram of TOORUN M26 Bluetooth Earpiece highlighting Multi-function Button, Volume Button, Receiver, Charging Port, LED, and Microphone

Figure 2: Key components and controls of the M26 Earpiece.

  • Multi-function Button: Used for power on/off, pairing, answering/ending calls, and activating voice assistant.
  • Volume Buttons: Adjusts audio volume.
  • Receiver: The speaker that delivers audio to your ear.
  • Charging Port: Micro USB port for charging the device.
  • LED Indicator: Displays device status (e.g., charging, pairing, connected).
  • Microphone (MIC): Captures your voice for calls and voice commands.

Setup

1. Charging the Earpiece

Before first use, fully charge the earpiece. Connect the provided Micro USB cable to the charging port on the earpiece and the other end to a USB power source. The LED indicator will show charging status and turn blue when fully charged. A full charge takes approximately 1.5 hours and provides up to 13 hours of continuous music playback.

2. Pairing with a Single Device

  1. Ensure the earpiece is turned off.
  2. Press and hold the Multi-function Button for 5-8 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
  3. On your mobile device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
  4. Select "TOORUN M26" from the list of found devices.
  5. Once connected, the LED indicator will flash blue slowly, and you will hear a "Connected" voice prompt.

3. Pairing with Two Bluetooth Devices (Multipoint Connection)

The TOORUN M26 supports connecting to two Bluetooth devices simultaneously.

  1. First, pair the earpiece with your first mobile device following the "Pairing with a Single Device" steps above.
  2. After successful pairing, turn off both the Bluetooth earpiece and the Bluetooth function on your first mobile device.
  3. Turn on the earpiece again (long press the Multi-function Button for 5-8 seconds to enter pairing status).
  4. Pair the earpiece with your second mobile device as you would a single device.
  5. Once the second device is connected, turn on the Bluetooth function of your first mobile device. The earpiece will automatically reconnect to the first device.
  6. Both mobile devices are now connected to the earpiece.

Video 1: Official TOORUN video demonstrating the features and usage of the Bluetooth Earpiece. This video provides a visual guide to the product's capabilities.

Operating Instructions

Basic Functions

  • Power On: Press and hold the Multi-function Button until the LED flashes blue and you hear "Power on".
  • Power Off: Press and hold the Multi-function Button until the LED flashes red and you hear "Power off".
  • Answer/End Call: Short press the Multi-function Button.
  • Reject Call: Press and hold the Multi-function Button for 2 seconds.
  • Redial Last Number: Double-press the Multi-function Button.
  • Play/Pause Music: Short press the Multi-function Button.
  • Volume Up/Down: Use the Volume Buttons.
  • Activate Voice Assistant (SIRI/Google Assistant): Press and hold the Multi-function Button for 3 seconds.

Voice Prompts

The earpiece provides audio notifications for various statuses:

  • "Battery high/Medium/Low"
  • "Power on/off"
  • "Pairing"
  • "Connected/Disconnected"

Maintenance

To ensure the longevity and optimal performance of your TOORUN M26 Bluetooth Earpiece, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the earpiece. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the earpiece in a cool, dry place away from extreme temperatures and direct sunlight.
  • Water Exposure: The earpiece is not water-resistant. Avoid exposure to water, rain, or excessive moisture.
  • Charging: Use only the provided charging cable or a certified Micro USB cable. Do not overcharge the device.
  • Ear Cushions/Hooks: Regularly check and clean the silicone ear cushion and ear hooks. Replace if damaged for comfort and hygiene.
Person wearing the TOORUN M26 Bluetooth Earpiece comfortably in their ear

Figure 3: The TOORUN M26 Earpiece designed for comfortable wear.

Troubleshooting

If you encounter issues with your TOORUN M26 Earpiece, refer to the following common solutions:

ProblemPossible Solution
Earpiece does not power on.Ensure the earpiece is fully charged. Connect it to a power source and check the LED indicator.
Cannot pair with a device.
  • Ensure the earpiece is in pairing mode (LED flashing red and blue).
  • Make sure Bluetooth is enabled on your device and it is within range (up to 32.8 feet).
  • Forget/delete "TOORUN M26" from your device's Bluetooth list and try pairing again.
  • Restart both the earpiece and your mobile device.
No sound or low volume.
  • Adjust the volume on both the earpiece and your connected device.
  • Ensure the earpiece is properly connected to your device.
  • Check if the earpiece is selected as the audio output device on your phone.
Call quality is poor.
  • Ensure the microphone is not obstructed.
  • Move closer to your connected device to avoid interference.
  • Avoid using the earpiece in environments with strong electromagnetic interference.
Earpiece disconnects frequently.
  • Ensure your device is within the Bluetooth range.
  • Check for obstacles between the earpiece and your device.
  • Ensure the earpiece is sufficiently charged.

Specifications

Key technical specifications for the TOORUN M26 Bluetooth Earpiece:

  • Model: M26
  • Brand: TOORUN
  • Connectivity Technology: Wireless (Bluetooth)
  • Bluetooth Version: 5.1
  • Bluetooth Range: Up to 32.8 feet (10 meters)
  • Ear Placement: In Ear
  • Form Factor: In Ear
  • Battery Life (Average): Up to 13 hours (music playback)
  • Battery Charge Time: Approximately 1.5 hours
  • Control Type: Voice Control, Touch
  • Microphone: Included
  • Noise Control: CVC6.0 Broadband Noise Cancellation (for calls)
  • Frequency Range: 20 Hz - 20,000 Hz
  • Impedance: 16 Ohms
  • Item Weight: 0.28 Ounces (approximately 8 grams)
  • Material: Plastic
  • Compatible Devices: Cellphones, Bluetooth devices (iOS, Android, laptops)
  • Water Resistance Level: Not Water Resistant

Warranty and Support

TOORUN products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official TOORUN website. If you require assistance, please contact TOORUN customer service.

You can visit the TOORUN store on Amazon for more information: TOORUN Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.