Jacob Delafon Escale Toilet Floor Fixing Kit Instruction Manual

Introduction

This manual provides detailed instructions for the proper installation and maintenance of the Jacob Delafon Escale toilet floor fixing kit. Adhering to these guidelines will ensure a secure and stable installation of your Escale toilet.

Please read all instructions carefully before beginning the installation process. Keep this manual for future reference.

Package Contents

Verify that all components are present before starting the installation.

Figure 1: Components of the Jacob Delafon Escale Toilet Floor Fixing Kit. This image displays the various parts included in the kit, which typically consist of two long threaded rods with spherical ends, a hexagonal wrench, and a protective sleeve or cover. These components are essential for securely fastening the toilet to the floor.

• 2 x Threaded Fixing Rods
• 2 x Fixing Sleeves/Anchors (if applicable, based on image interpretation)
• 1 x Hexagonal Wrench
• 1 x Protective Cover/Sleeve (as seen in image)
• Washers and Nuts (not explicitly visible but implied for fixing)

Setup and Installation

This section outlines the steps for securely installing your Jacob Delafon Escale toilet using the provided floor fixing kit. Ensure the floor surface is clean, level, and structurally sound before proceeding.

Required Tools (Not Included):

• Drill
• Drill bit appropriate for floor material and anchor size
• Measuring tape
• Pencil or marker
• Level
• Sealant (e.g., silicone)

Installation Steps:

1. Position the Toilet: Carefully place the Escale toilet in its desired final position on the floor. Ensure it is aligned correctly with the waste pipe and water supply.
2. Mark Fixing Points: Using a pencil or marker, accurately mark the drilling points on the floor through the toilet's fixing holes. Remove the toilet.
3. Drill Holes: Drill holes at the marked points to the appropriate depth and diameter for the fixing sleeves/anchors. Clean any dust or debris from the drilled holes.
4. Insert Anchors: Insert the fixing sleeves or anchors into the drilled holes. Ensure they are flush with the floor surface.
5. Prepare Fixing Rods: Insert the threaded fixing rods into the anchors. The spherical end should be positioned to engage with the toilet's fixing mechanism.
6. Reposition Toilet: Carefully place the toilet back over the fixing rods, aligning the toilet's fixing holes with the rods.
7. Secure the Toilet: From inside the toilet's base (or access points), use the provided hexagonal wrench to tighten the nuts onto the threaded rods. Tighten gradually and evenly on both sides to prevent stress on the ceramic. Do not overtighten, as this can crack the ceramic.
8. Check Stability: Gently rock the toilet to ensure it is firmly secured to the floor and does not wobble.
9. Apply Sealant: Apply a bead of sanitary silicone sealant around the base of the toilet where it meets the floor. This provides a watertight seal and additional stability. Smooth the sealant for a neat finish.
10. Install Protective Cover: If a protective cover or sleeve is included, install it over the fixing mechanism according to the toilet's design.

Usage and Functionality

The Jacob Delafon Escale toilet floor fixing kit is designed to provide a robust and concealed method for securing your toilet to the bathroom floor. Once correctly installed, the fixings ensure the toilet remains stable and safe for daily use.

The primary function of this kit is to prevent any movement or instability of the toilet, which is crucial for both user safety and the longevity of the plumbing connections. The design allows for a clean aesthetic by concealing the fixing points.

Maintenance

Proper maintenance ensures the continued stability and hygiene of your toilet installation.

• Regular Cleaning: Clean the exterior of the toilet and the sealed base area regularly with mild, non-abrasive cleaners. Avoid harsh chemicals that could degrade the sealant or ceramic finish.
• Check for Movement: Periodically check the toilet for any signs of wobbling or looseness. If movement is detected, refer to the Troubleshooting section.
• Sealant Inspection: Inspect the silicone sealant around the base of the toilet annually. If the sealant shows signs of cracking, peeling, or mold, remove the old sealant and reapply fresh sanitary silicone to maintain a watertight seal.

Troubleshooting

If you encounter issues with your toilet's stability, consult the following troubleshooting guide.

Issue: Toilet is wobbly or loose.

• Possible Cause 1: Fixing nuts are loose.

  Solution: Access the fixing nuts (usually from inside the toilet base) and carefully tighten them using the hexagonal wrench. Do not overtighten. Check for stability after tightening.

• Possible Cause 2: Floor surface is uneven.

  Solution: If the floor is significantly uneven, shims may be required under the toilet base before tightening the fixings. Consult a professional plumber or installer if this is the case, as it may require re-installation.
• Possible Cause 3: Sealant has degraded.

  Solution: Remove old sealant, clean the area thoroughly, and reapply fresh sanitary silicone sealant around the base of the toilet.

Issue: Water leakage around the base.

• Possible Cause: Sealant failure or improper application.

  Solution: Remove all old sealant, ensure the base is dry and clean, then reapply a continuous, watertight bead of sanitary silicone sealant around the entire perimeter of the toilet base.

Specifications

Warranty Information

Jacob Delafon products are manufactured to high-quality standards. Specific warranty details for this fixing kit may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For detailed warranty terms and conditions, please refer to the documentation provided with your Jacob Delafon toilet or visit the official Jacob Delafon website.

Customer Support

If you require further assistance with the installation, maintenance, or troubleshooting of your Jacob Delafon Escale toilet floor fixing kit, please contact your retailer or a qualified plumbing professional.

For general inquiries about Jacob Delafon products, please visit the official Jacob Delafon website for contact information and support resources.