Introduction
This manual provides essential instructions for the safe and efficient setup, operation, and maintenance of your Aquarian Phoenix 21' x 52" Round Steel-Frame Above Ground Swimming Pool. Please read all instructions carefully before beginning assembly or use. Retain this manual for future reference.
Image: The Aquarian Phoenix 21' x 52" Round Steel-Frame Above Ground Swimming Pool, showcasing its dimensions and capacity in a backyard setting.
Setup Instructions
1. Site Preparation
- Select a flat, level area for pool installation. Uneven ground can compromise the pool's structural integrity and void the warranty.
- Ensure the chosen site is free from sharp objects, rocks, or debris that could damage the pool liner.
- Clear the area of any vegetation and ensure proper drainage away from the pool.
- Consider proximity to water sources, electrical outlets (for pump/filter, sold separately), and sunlight exposure.
2. Component Identification
Unpack all components and verify against the parts list provided in your packaging. The kit includes the durable steel frame components. Accessories such as the liner, skimmer, pump, and filter are sold separately.
Image: Detailed diagram illustrating the pool's construction, including 6-inch steel top rails, 5-inch vertical posts, and high-impact top caps, all made of galvanized steel for durability.
3. Assembly Steps
- Lay out the Bottom Track: Assemble the bottom track pieces on the prepared, level ground to form the circular base of the pool. Ensure all connections are secure.
- Install Vertical Posts: Insert the vertical posts into the bottom track connectors.
- Unroll the Pool Wall: Carefully unroll the galvanized steel pool wall into the bottom track. This step often requires multiple people due to the weight and flexibility of the wall. Ensure the wall is properly seated in the track.
- Connect Wall Ends: Securely connect the two ends of the pool wall according to the manufacturer's instructions, typically using a vertical closure strip and fasteners.
- Install Top Rails and Top Caps: Place the 6-inch steel top rails over the top edge of the pool wall and secure them with the high-impact resin connectors (top caps) over each vertical post.
- Install Liner (Sold Separately): Once the frame is fully assembled, carefully install your chosen pool liner according to its specific instructions. Ensure it is centered and smooth, with no wrinkles.
- Install Skimmer and Return Fittings (Sold Separately): Cut out the designated areas in the liner and pool wall for the skimmer and return fittings, then install them as per their instructions.
- Fill with Water: Begin filling the pool with water. As the water level rises, smooth out any remaining wrinkles in the liner. Stop filling when the water reaches the recommended level, typically below the top rail.
4. Safety Precautions
- Always supervise children around the pool.
- Install appropriate safety barriers, such as fencing or alarms, as required by local regulations.
- Do not dive into the pool.
- Ensure all electrical equipment (pump, filter, lighting) is properly grounded and installed by a qualified electrician.
Image: The Aquarian Phoenix pool fully assembled and filled with water, integrated into a backyard with an adjacent wooden deck.
Operating Instructions
1. Water Chemistry
- Maintain proper water chemistry by regularly testing and adjusting pH, alkalinity, and sanitizer levels (e.g., chlorine).
- Refer to your chemical manufacturer's guidelines for specific dosages and testing frequencies.
2. Filtration System (Sold Separately)
- Operate your pool's filtration system daily to ensure water clarity and sanitation. The duration of operation depends on pool size, usage, and environmental factors.
- Clean or backwash your filter regularly as recommended by the filter manufacturer.
3. General Usage
- Ensure all users are aware of pool depth and safety rules.
- Keep the pool area clean and free of clutter.
- Use a pool cover when the pool is not in use to reduce evaporation, keep debris out, and maintain water temperature.
Maintenance
1. Regular Cleaning
- Skim the surface daily to remove leaves and other floating debris.
- Vacuum the pool floor as needed to remove settled dirt and particles.
- Brush the pool walls and floor weekly to prevent algae growth and remove stubborn dirt.
2. Water Level
- Maintain the water level within the recommended range (typically halfway up the skimmer opening).
- Add water as needed to compensate for evaporation or splash-out.
3. Component Inspection
- Periodically inspect the pool frame, wall, and liner for any signs of wear, damage, or corrosion.
- Tighten any loose fasteners on the frame components.
- Address any minor repairs promptly to prevent further damage.
4. Winterization
Proper winterization is crucial to protect your pool during colder months and extend its lifespan.
- Clean the Pool: Thoroughly clean the pool, vacuuming and brushing all surfaces.
- Balance Water Chemistry: Adjust pH and alkalinity, then shock the pool water.
- Add Winterizing Chemicals: Follow instructions for winterizing chemical kits.
- Drain Water: Lower the water level below the skimmer and return fittings.
- Disconnect Equipment: Disconnect and store the pump, filter, heater, and other accessories indoors. Drain all water from lines and equipment.
- Cover the Pool: Install a winter cover securely over the pool.
Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| Pool wall not fitting correctly or popping out of track during assembly. | Uneven ground; improper seating of wall in bottom track; insufficient personnel during assembly. | Ensure ground is perfectly level before starting. Verify the wall is fully seated in the bottom track. Recruit at least 3-4 people for wall installation to manage its weight and flexibility. |
| Water leaks from liner. | Puncture or tear in liner; loose fittings. | Locate the leak and repair with a vinyl patch kit. Ensure all skimmer and return fittings are tightly sealed. |
| Cloudy water. | Poor filtration; unbalanced water chemistry; insufficient sanitizer. | Check and clean filter. Test and adjust water chemistry (pH, alkalinity). Add appropriate sanitizer. Run filter for longer periods. |
| Algae growth. | Low sanitizer levels; poor circulation; high phosphates. | Shock the pool. Brush walls and floor. Ensure adequate filtration. Consider an algaecide or phosphate remover. |
Product Specifications
Image: Visual representation of the Aquarian Phoenix pool's key specifications including diameter, height, water depth, and water capacity.
- Model Number: WAD0021D52SM
- UPC: 621120096850
- Shape: Round
- Diameter: 21 feet (252 inches)
- Height: 52 inches
- Water Depth: Approximately 48 inches (depending on fill level)
- Capacity: 9300 gallons
- Material: Galvanized Steel (frame components), Alloy Steel (general material type)
- Wall Pattern: Acadia
- Accents: Cognac
- Frame Color: Transparent Krystal Kote
- Indoor/Outdoor Usage: Outdoor
- Included Components (Kit): Pool frame components (liner, skimmer, pump, filter sold separately)
Warranty Information
This Aquarian pool kit is covered by a manufacturer's warranty. Please refer to the warranty card included with your product packaging for specific terms, conditions, and duration. Keep your proof of purchase for any warranty claims.
Customer Support
For technical assistance, missing parts, or warranty inquiries, please contact Aquarian customer support. Contact details can typically be found on the product packaging, the manufacturer's official website, or the warranty documentation.
When contacting support, please have your model number (WAD0021D52SM) and proof of purchase readily available.