1. Introduction
Thank you for choosing the Lenco PDR-030 DAB+/FM Portable Digital Radio. This manual provides essential information for setting up, operating, and maintaining your device. The PDR-030 offers high-quality digital radio reception (DAB+) and traditional FM radio, along with features such as an integrated rechargeable battery for portability, an RDS display, station memory, and an alarm clock function.
Included Components:
- Lenco PDR-030 Digital Radio
- AC Power Adapter (220 Volt)
- User Manual
2. Important Safety Information
- Do not expose the device to rain or moisture to prevent fire or electric shock.
- Ensure the power adapter voltage matches your local power supply.
- Do not open the casing. Refer all servicing to qualified personnel.
- Avoid placing the unit near heat sources or in direct sunlight.
- Handle the integrated battery with care. Do not attempt to replace it yourself.
- Keep the device away from strong magnetic fields.
3. Product Overview
Familiarize yourself with the main components and controls of your Lenco PDR-030 radio.
Figure 3.1: Front Panel of Lenco PDR-030 Radio. Features include a blue backlit LCD display, power/source button, alarm, sleep, info/menu, preset buttons, select/snooze, scan, previous, next buttons, and a rotary volume knob.
Key Controls and Features:
- Display: Two-line illuminated LCD for time, date, station name, and information.
- Power/Source Button: Turns the radio on/off and switches between DAB+ and FM modes.
- Volume Knob: Adjusts the audio output level.
- Telescopic Antenna: For optimal radio signal reception.
- Headphone Jack (3.5mm): For private listening.
- Alarm/Sleep/Info/Menu/Preset Buttons: For various functions including setting alarms, sleep timer, accessing information, menu navigation, and managing station presets.
- Select/Snooze/Scan/Prev/Next Buttons: For station tuning, menu selection, and snooze function.
4. Setup
4.1 Powering the Radio
The PDR-030 can be powered by the included AC adapter or its integrated rechargeable battery.
- AC Power: Connect the supplied 220V AC power adapter to the DC input jack on the radio and then to a wall outlet. The radio will automatically begin charging the internal battery.
- Battery Power: The integrated Lithium-ion battery allows for portable use. Ensure the battery is sufficiently charged before use without the AC adapter.
4.2 Antenna Setup
Extend the telescopic antenna fully for optimal reception of both DAB+ and FM signals. Adjust its position for the best signal quality.
4.3 Initial Power On and Station Scan
- Press the Power/Source button to turn on the radio.
- Upon first use, the radio will automatically enter DAB+ mode and perform a full scan for available digital radio stations. This may take a few minutes.
- Once the scan is complete, the radio will tune to the first available station.
5. Operating Instructions
5.1 Power On/Off
Press the Power/Source button to turn the radio on or off.
5.2 Mode Selection (DAB+/FM)
Press the Source button repeatedly to switch between DAB+ and FM radio modes.
5.3 Tuning Stations
- DAB+ Mode:
- After the initial scan, use the Prev and Next buttons to navigate through the list of available DAB+ stations.
- To perform a new full scan, press the Menu button, navigate to "Full Scan" using Prev/Next, and press Select.
- FM Mode:
- Press the Scan button to automatically scan for the next available FM station.
- For manual tuning, press and hold the Prev or Next buttons to fine-tune the frequency.
5.4 Saving and Recalling Preset Stations
The radio allows you to store up to 10 DAB+ and 10 FM preset stations.
- To Save a Preset:
- Tune to the desired station.
- Press and hold the Preset button until "Preset Store" appears on the display.
- Use the Prev/Next buttons to select a preset number (1-10).
- Press Select to confirm and save the station.
- To Recall a Preset:
- Press the Preset button briefly.
- Use the Prev/Next buttons to select the desired preset number.
- Press Select to tune to the preset station.
5.5 Volume Control
Rotate the Volume Knob clockwise to increase the volume and counter-clockwise to decrease it.
5.6 RDS Functionality (FM Mode)
In FM mode, the RDS (Radio Data System) function displays information such as station name, program type, and other broadcast data on the two-line LCD display.
5.7 Alarm Clock Function
The PDR-030 can be used as an alarm clock with two separate alarm times.
- Setting an Alarm:
- Press the Alarm button.
- Use Prev/Next to select Alarm 1 or Alarm 2, then press Select.
- Follow the on-screen prompts to set the alarm time, duration, source (Buzzer or Radio), frequency (Daily, Once, Weekdays, Weekends), and volume.
- Ensure the alarm is set to "On" and press Select to save.
- Snooze Function: When the alarm sounds, press the Snooze button to temporarily silence it for a set period.
- Sleep Timer: Press the Sleep button repeatedly to set a sleep timer (e.g., 15, 30, 45, 60 minutes) after which the radio will automatically turn off.
5.8 Headphone Connection
Connect 3.5mm stereo headphones to the headphone jack for private listening. The internal speaker will be muted automatically.
6. Maintenance
6.1 Cleaning
Wipe the radio's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Ensure no liquids enter the device.
6.2 Battery Care
The integrated Lithium-ion battery is designed for long life. To maximize battery lifespan:
- Avoid fully discharging the battery frequently.
- If storing the radio for an extended period, charge the battery to approximately 50% and store in a cool, dry place.
- Do not attempt to replace the battery yourself. Contact qualified service personnel if battery issues arise.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | AC adapter not connected or faulty; battery discharged. | Check AC adapter connection. Charge the battery. |
| Poor DAB+/FM reception | Antenna not extended; weak signal area; interference. | Fully extend and adjust the telescopic antenna. Move the radio to a location with better signal. Avoid placing near other electronic devices. |
| No sound | Volume too low; headphones connected; mute activated. | Increase volume. Disconnect headphones. Check if mute is active (if applicable). |
| Alarm not sounding | Alarm not activated; alarm volume too low; incorrect time setting. | Ensure alarm is set to "On". Check alarm volume. Verify current time and alarm time settings. |
8. Specifications
Figure 8.1: Lenco PDR-030 Dimensions.
| Feature | Detail |
|---|---|
| Model Number | PDR-030 |
| Tuner Technology | DAB+, FM (Ukw) |
| Power Source | Battery-Powered (Integrated Lithium-ion), AC Adapter |
| AC Voltage | 220 Volt |
| Product Dimensions (W x D x H) | 21.4 x 6.5 x 13.8 cm (approx. 22.5 x 8.5 x 15 cm as per another spec) |
| Item Weight | 9 g (Note: This seems incorrect, likely 670g from description) |
| Material Type | Plastic |
| Hardware Interface | 3.5 mm Audio (Headphone Jack) |
| Special Features | Portable, RDS Display, Alarm Clock, Station Memory (10 DAB+, 10 FM) |
Note: Some dimensions and weight specifications provided by the manufacturer may vary slightly. The description states 670 grams for weight, while specifications list 9g. Please refer to the product packaging for the most accurate information.
9. Warranty and Support
Lenco products are designed for reliability and performance. This product typically comes with a 24-month manufacturer's warranty from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For technical support, service, or warranty inquiries, please refer to the contact information provided on the Lenco official website or your local retailer. Do not attempt to repair the device yourself.
For more information, you may visit the Lenco Store on Amazon.