DONGFANG 110cc ATV

DONGFANG 110cc ATV Fully Automatic Four Wheelers ATV Quads for Kids Burgundy Instruction Manual

Model: 110cc ATV

1. Product Overview

The DONGFANG 110cc ATV is a fully automatic four-wheeler designed for kids and youth, offering a dependable and easy-to-handle riding experience. It features an air-cooled, single-cylinder, 4-stroke engine with convenient electric start and automatic transmission. Safety features include a remote on/off switch, speed limiter, and engine kill switch. The ATV is equipped with beefy front and rear 14.5x7-6 knobby tires for excellent traction across various terrains.

This model comes with matching rims, LED lights, and a strong rear metal rack.

DONGFANG 110cc ATV in Burgundy with overall dimensions

Figure 1: DONGFANG 110cc ATV in Burgundy, showing overall dimensions (53"L x 30"W x 34"H).

Video 1: Overview of the HHH 125cc ATV Quad Utility 4 Wheelers, demonstrating its features and performance.

2. Setup and Assembly

Your DONGFANG 110cc ATV is shipped approximately 75% assembled. Some assembly is required before first use. Please follow these instructions carefully.

2.1 Unpacking and Parts Identification

Carefully remove the ATV from its packaging. Identify all included components:

  • 110cc fully automatic ATV (main unit)
  • Wheels (4x)
  • Handlebars
  • Front and Rear Racks
  • Battery
  • Tool Kit (wrenches, screwdrivers, etc.)
  • Reflectors
  • Footrests
  • Assembly Hardware (bolts, nuts, washers)

Video 2: X-PRO Eagle 40 Kids ATV Assembly Video, demonstrating the unpacking and initial assembly steps.

2.2 Wheel Installation

Attach the wheels to the axles using the provided hardware. Ensure all nuts are securely tightened. Check tire pressure before first use; recommended pressure is typically found on the tire sidewall.

Video 3: X-PRO 125CC ATV Assembled Video, showing the process of attaching wheels and other components.

2.3 Handlebar and Rack Installation

Install the handlebars into the steering column and secure them with the clamps and bolts. Attach the front and rear racks to their designated mounting points on the ATV frame. Ensure all connections are firm.

2.4 Battery Connection

Locate the battery compartment. Connect the positive (+) terminal (red cable) and negative (-) terminal (black cable) to the battery posts. Ensure connections are tight to prevent electrical issues.

3. Operating Instructions

Before operating the ATV, ensure all assembly steps are complete and all safety checks have been performed.

3.1 Pre-Ride Checks

  • Tires: Check tire pressure.
  • Controls: Verify throttle, brakes, and steering operate smoothly.
  • Fuel: Ensure adequate fuel level.
  • Oil: Check engine oil level.
  • Safety Features: Test the remote stop switch and engine kill switch.

3.2 Starting the ATV

  1. Insert the key into the ignition and turn it to the "ON" position.
  2. Ensure the engine kill switch is in the "RUN" position.
  3. Apply the brake lever.
  4. Press the electric start button.

3.3 Driving and Safety

  • Always wear a helmet and appropriate safety gear.
  • Familiarize yourself with the speed limiter settings.
  • Operate the ATV in open, uncrowded areas.
  • Avoid excessive speeds and sudden maneuvers.

4. Maintenance

Regular maintenance is crucial for the longevity and safe operation of your ATV.

4.1 Routine Checks

  • Oil Level: Check engine oil regularly and top up as needed.
  • Chain: Inspect the drive chain for proper tension and lubrication.
  • Brakes: Ensure brakes are functioning correctly and adjust if necessary.
  • Tires: Maintain correct tire pressure.

4.2 Cleaning and Storage

Clean the ATV after each ride, especially after off-road use. Store the ATV in a dry, secure location. If storing for extended periods, connect the battery to a trickle charger.

5. Troubleshooting

Here are some common issues and their potential solutions:

  • ATV does not start:
    • Check battery connections and charge level.
    • Ensure key is in "ON" position and kill switch is "RUN".
    • Verify fuel level.
  • Engine runs rough:
    • Check fuel quality and fuel filter.
    • Inspect spark plug.
  • Brakes are not effective:
    • Adjust brake cable tension.
    • Inspect brake pads for wear.

For persistent issues, consult a qualified technician.

6. Specifications

FeatureSpecification
BrandDONGFANG
Model Name110cc gas 4 wheeler
Engine TypeSingle Cylinder, 4-Stroke, Air Cooled
Piston Displacement107cc
Horsepower6.7 hp
TransmissionAutomatic
StarterElectric start
Maximum Speed28 mph
Product Dimensions (L x W x H)53" x 30" x 34"
Seat Height22 inches
Wheelbase31 inches
Ground Clearance3.3 inches
Front/Rear Tires145/70-6 inches
Net Weight158.7 pounds
Maximum Weight Capacity176 Pounds
Frame MaterialSteel
Special FeaturesLED Lights, Matching Rims, Non-Slip Deck, Seat

7. Warranty and Support

This product comes with a 30-day warranty for replacement parts. For any issues or support inquiries, please contact the seller directly.

Note: Transportation of this item is subject to hazardous materials regulation.

© 2024 DONGFANG. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.