PHILIPS Astra Spot Round LED Light

1. Introduction

The PHILIPS Astra Spot Round LED Light is designed to illuminate cabinets, bookshelves, and utility areas effectively. This compact recessed LED spot features a long-life LED light source with a strong, focused beam, making it a practical lighting solution for various indoor applications. It is built with a metal sink for durable performance, offers wide voltage and surge protection, and utilizes long-life COB LEDs, ensuring reliability and efficiency.

2. Important Safety Information

Please read all instructions carefully before installation and use. Retain this manual for future reference.

• Electrical Safety: Always disconnect power at the circuit breaker or fuse box before installation, servicing, or cleaning.
• Qualified Electrician: Installation should be performed by a qualified electrician in accordance with all applicable electrical codes.
• Voltage Compatibility: Ensure the supply voltage matches the operating voltage of the light (240 volts).
• Indoor Use Only: This product is designed for indoor use only. Do not expose to water or excessive moisture.
• Heat Dissipation: Ensure adequate ventilation around the fixture to prevent overheating. Do not cover the light with insulating material unless specifically designed for it.
• Handling: Handle the LED light with care. Avoid dropping or subjecting it to strong impacts.
• Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

3. Package Contents

Verify that all components are present and undamaged upon opening the package.

• 1 x PHILIPS Astra Spot Round LED Light (Warm White, 7-Watts)
• Installation Guide (this manual)

Image: The PHILIPS Astra Spot LED Light in its retail packaging, showcasing product features and branding.

4. Installation Guide

4.1. Before You Begin

• Ensure power is OFF at the main circuit breaker.
• Gather necessary tools: screwdriver, wire strippers, measuring tape, pencil.
• Confirm the installation location is suitable for a recessed light fixture and has adequate space for the light's dimensions (11 cm L x 10 cm W x 6.8 cm H).

4.2. Mounting Instructions (Flush Mount)

1. Prepare the Opening: Create a circular opening in the ceiling or cabinet surface suitable for the recessed light. The light is designed for flush mount installation.
2. Wiring: Connect the electrical wires from the ceiling/cabinet to the light fixture's wires. Ensure proper polarity (Live to Live, Neutral to Neutral, Ground to Ground). Use appropriate wire connectors.
3. Secure the Light: Gently push the light fixture into the prepared opening. The spring clips on the sides of the light will secure it firmly in place against the surface.
4. Final Check: Ensure the light is flush with the surface and securely mounted.
5. Restore Power: Once installation is complete, restore power at the main circuit breaker.

Image: A detailed view of the PHILIPS Astra Spot Round LED Light, showing its COB LED, reflector, and mounting clips, ready for installation.

5. Operation

The PHILIPS Astra Spot LED Light operates as a standard light fixture. Once properly installed and connected to a power source, it can be controlled via a wall switch or any connected control method (e.g., touch switch if integrated into the system). The light provides a warm white illumination with a focused beam, ideal for accent lighting or task lighting in specific areas.

Image: The PHILIPS Astra Spot LED Light installed in a ceiling, providing warm, focused illumination in a living space, highlighting its discreet design and effective lighting.

6. Care and Maintenance

The PHILIPS Astra Spot LED Light requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:

• Cleaning: Before cleaning, ensure the power is disconnected. Wipe the exterior of the light with a soft, dry, lint-free cloth. Do not use liquid or aerosol cleaners, as they may damage the finish or internal components.
• No User-Serviceable Parts: This LED light contains no user-serviceable parts. Do not attempt to open or repair the fixture yourself. Any unauthorized tampering will void the warranty.
• Disposal: At the end of its life, dispose of the product according to local regulations for electronic waste.

7. Troubleshooting

If you encounter issues with your PHILIPS Astra Spot LED Light, refer to the table below for common problems and solutions.

If the problem persists after attempting these solutions, please contact customer support.

8. Technical Specifications

9. Warranty and Support

This PHILIPS Astra Spot Round LED Light comes with a 1-year warranty on the product from the date of invoice. This warranty covers manufacturing defects and material flaws under normal use.

For warranty claims, technical support, or any inquiries, please contact the manufacturer or authorized service center. Do not attempt to repair the product yourself, as this will void the warranty.

Manufacturer/Importer: Signify Innovations India Limited, PS Arcadia Central, 3A, 3rd Floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata-700017, West Bengal, India.