1. Introduction
Thank you for choosing the Minn Kota Riptide Terrova Saltwater Electric-Steer Bow-Mount Trolling Motor. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your trolling motor. Please read this manual thoroughly before using your product.
The Riptide Terrova is designed for saltwater use, featuring a 54-inch shaft and 55 lbs of thrust. It integrates advanced technologies such as the i-Pilot GPS Trolling System and Digital Maximizer for enhanced control and battery efficiency.
Figure 1: Minn Kota Riptide Terrova Saltwater Trolling Motor.
2. Safety Information
Always prioritize safety when operating any marine equipment. Failure to follow these instructions could result in injury or damage to the product or vessel.
- Read and understand all instructions before installation and operation.
- Ensure the motor is securely mounted to the boat's bow.
- Disconnect power to the motor before performing any maintenance or propeller work.
- Keep hands and feet clear of the propeller when the motor is in operation.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).
3. What's in the Box
Your Minn Kota Riptide Terrova package includes the following components:
- Trolling Motor Assembly
- i-Pilot GPS Remote (if applicable to your model)
- Mounting Hardware
- Propeller and Propeller Nut
- User Manual
4. Setup
4.1 Mounting the Trolling Motor
The Riptide Terrova is designed for bow-mount installation. Ensure the mounting surface is strong enough to support the motor's weight and thrust. Proper alignment with the boat's gunnel is crucial for optimal performance and to ensure all mounting bolts can be secured.
Installation typically involves drilling pilot holes and securing the motor base with bolts, washers, and nuts. It is recommended to have two people for this process: one to hold the nuts from underneath and another to tighten the bolts from above.
Video 1: Installation process for the Minn Kota Riptide Terrova Trolling Motor. This video demonstrates the steps involved in mounting the motor to a boat's bow, including drilling and securing the bolts.
4.2 Propeller Installation
Before installing the propeller, ensure the shipping spacer (if present) is removed from the drive pin. Attach the propeller to the motor shaft, aligning it with the drive pin. Secure it with the propeller nut, ensuring it is tightened firmly but not overtightened.
5. Operating Instructions
5.1 Deploying and Stowing the Motor
To deploy the motor, press the deployment pedal and gently lower the motor into the water. To stow, lift the motor until it locks into its stowed position. The Riptide Terrova is designed for smooth and easy deployment and retrieval.
5.2 i-Pilot GPS Trolling System
The i-Pilot GPS Trolling System provides advanced boat control features:
- Spot-Lock with Jog: This feature holds your boat in a precise GPS location with unparalleled accuracy. With the included heading sensor, you can use the Jog function to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or a compatible Humminbird fish finder.
- AutoPilot: Automatically navigate your boat in a chosen direction. Point the trolling motor head in your desired direction, activate AutoPilot, and the motor will maintain that heading, compensating for wind, waves, and current.
- Record Paths: The i-Pilot system allows you to record and retrace fishing paths.
- Speed and Steering Control: Adjust speed and steering directly from the i-Pilot remote's easy-to-read LCD screen.
5.3 Digital Maximizer
The Digital Maximizer technology provides up to five times longer run time on a single battery charge. This variable speed control system delivers only the necessary power, conserving battery life for extended fishing trips.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your trolling motor.
- After each use in saltwater, rinse the motor thoroughly with fresh water.
- Inspect the propeller for any fishing line, debris, or damage. Remove any obstructions.
- Check all electrical connections for corrosion and ensure they are secure.
- Periodically inspect the mounting hardware for tightness.
- Lubricate moving parts as recommended in the full service manual (available from Minn Kota).
7. Troubleshooting
If you encounter issues with your Riptide Terrova motor, consider the following common troubleshooting steps:
- Motor Not Responding: Check battery connections and ensure the battery is charged. Verify all power cables are securely connected.
- Reduced Power: Inspect the propeller for obstructions. Check battery charge level.
- i-Pilot Remote Issues: Ensure the remote has fresh batteries and is properly paired with the motor. Refer to the i-Pilot manual for pairing instructions.
- Unusual Noise: Disconnect power and inspect the propeller for damage or debris.
For more detailed troubleshooting, consult the comprehensive manual or contact Minn Kota customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Minn Kota |
| Model Number | 1363706 |
| Item Weight | 55 Pounds |
| Shaft Length | 54 inches |
| Thrust | 55 lbs |
| Voltage | 12 Volts |
| Mounting Type | Bow Mount |
| Operation Mode | Electric |
| Material | Aluminum |
| Recommended Use | For Salt Water |
| UPC | 029402042661 |
9. Warranty Information
The Minn Kota Riptide Terrova Trolling Motor (Model 1363706) comes with a 2 Year Limited Manufacturer Warranty. Please retain your proof of purchase for warranty claims. For full details on warranty coverage and terms, refer to the official Minn Kota warranty documentation or visit the Minn Kota website.
10. Support
For technical assistance, replacement parts, or further inquiries, please contact Minn Kota Customer Support. You can find contact information on the official Minn Kota website or through your product retailer.
