John Timberland Manhasset Outdoor Floor Fountain Instruction Manual

Introduction

Thank you for choosing the John Timberland Manhasset Outdoor Floor Fountain. This instruction manual provides essential information for the safe and proper setup, operation, and maintenance of your new water feature. Please read all instructions carefully before assembly and use.

Safety Information

WARNING: To reduce the risk of electric shock, do not expose electrical components to water. Always disconnect the power supply before performing any maintenance or cleaning.

• Ensure the fountain is placed on a level, stable surface to prevent tipping.
• Use only clean water in the fountain.
• Do not allow children or pets to play with the fountain unsupervised.
• Ensure the power cord is routed safely to avoid tripping hazards and is not pinched or damaged.
• Do not operate the pump dry. Always ensure the pump is fully submerged in water.
• Protect the fountain from freezing temperatures by following winterization instructions.

Package Contents

Please check to ensure all parts are present and undamaged:

• Fountain body (main unit)
• Water pump with power cord
• Hose (for pump connection)
• Instruction Manual

Setup & Assembly

Follow these steps to assemble and set up your fountain:

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to avoid scratches.
2. Position the Fountain: Select a level and stable location for your fountain. Ensure it is near a suitable electrical outlet and away from areas where splashing water could cause damage.
3. Connect the Pump: Locate the water pump and the hose. Attach one end of the hose to the pump's outlet.
4. Install the Pump: Place the pump inside the fountain's water basin. Route the hose up through the designated opening in the fountain body and connect the other end to the water inlet for the spout. Ensure the pump is fully submerged in the water basin.
5. Fill with Water: Fill the fountain basin with clean water. The water level should be sufficient to completely cover the pump, typically 4 to 5 gallons. Do not overfill.
6. Connect Power: Plug the pump's power cord into a grounded electrical outlet.

Operating Instructions

Once assembled and filled with water, plug the fountain into a suitable electrical outlet. The pump will begin circulating water, creating a cascading effect from the spout into the lower basins. The pump may have an adjustable flow control; refer to the pump's specific instructions for details on adjusting water flow. Ensure the water level remains adequate to keep the pump submerged during operation.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your fountain.

Cleaning

• Weekly: Check the water level and refill as needed to keep the pump submerged. Remove any leaves, debris, or algae from the water.
• Monthly (or as needed): Disconnect the power. Drain the water from the fountain. Clean the pump and internal tubing to prevent mineral buildup and clogs. Use a soft brush and mild soap if necessary. Rinse thoroughly.
• Algae Control: Use an algaecide specifically designed for fountains and safe for wildlife, if applicable.

Winterization

In areas with freezing temperatures, proper winterization is crucial to prevent damage:

• Disconnect the power and completely drain all water from the fountain.
• Remove the pump and hose. Clean them thoroughly and store them indoors in a dry, frost-free location.
• Clean the fountain body. If possible, move the entire fountain indoors. If not, cover it with a waterproof fountain cover or tarp to protect it from snow, ice, and debris.

Troubleshooting

Specifications

Warranty & Support

This John Timberland Manhasset Outdoor Floor Fountain comes with a limited 1-year manufacturer's warranty. For warranty claims or technical support, please contact Lamps Plus, the manufacturer, directly. Keep your proof of purchase for warranty validation.

Manufacturer: Lamps Plus

Additional Resources