Introduction
This manual provides essential instructions for the safe and efficient use of your Globo Lighting Table Lamp, Model 9007371343430. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Safety Instructions
- Ensure the power supply is disconnected before installation, cleaning, or maintenance.
- This product is designed for indoor use only.
- Do not exceed the specified wattage for the light bulb.
- Keep the lamp away from water and moisture.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Always use the correct type of bulb as specified.
Package Contents
Verify that all components are present and undamaged:
- 1 x Globo Lighting Table Lamp (Nickel Mat)
- 1 x GU10 LED Bulb (3W, 230V, 250lm, 3000K)
- User Manual
Setup
- Unpack the Lamp: Carefully remove all components from the packaging.
- Position the Lamp: Place the lamp on a stable, flat surface in your desired location.
- Install the Bulb: Insert the provided GU10 LED bulb into the lamp holder. Ensure it is securely twisted into place.
- Connect to Power: Plug the power cord into a standard 230V electrical outlet.
Image: The Globo Lighting Table Lamp, Model 9007371343430, featuring its nickel mat finish, flexible arm, and integrated switch on the base. This image illustrates the lamp's design and primary components.
Operating Instructions
The Globo Lighting Table Lamp is designed for simple operation:
- Turning On/Off: Locate the switch on the lamp's base or cord. Press the switch to turn the lamp on or off.
- Adjusting Light Direction: The lamp features a flexible arm (FLEXO). Gently bend and position the arm to direct the light as desired.
Maintenance
- Cleaning: Disconnect the lamp from the power supply before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down completely. Carefully unscrew the old GU10 bulb and replace it with a new GU10 LED bulb of the same wattage (max 3W) and voltage (230V).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. Bulb is faulty or loose. | Check if the lamp is properly plugged in. Check the wall outlet. Replace or tighten the bulb. |
| Light flickers. | Loose bulb connection. Faulty bulb. | Tighten the bulb. Replace the bulb. |
Specifications
| Model Number | 9007371343430 |
| Brand | Globo |
| Material | Nickel (Matte Finish) |
| Dimensions (H x W x L) | 37.5 x 7.8 x 24 cm |
| Light Source Type | LED |
| Bulb Type | GU10 (included) |
| Wattage | 1 x 3 Watts |
| Voltage | 230 Volts |
| Luminous Flux | 250 Lumens |
| Color Temperature | 3000 Kelvin |
| Energy Label | A+ |
| Power Source | Corded Electric |
| Item Weight | 11.02 Pounds (approx. 5 kg) |
Warranty and Support
Globo Lighting products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.
