beFree Sound Double 10 Inch Subwoofer Bluetooth Portable Party Speaker

Introduction

Thank you for purchasing the beFree Sound Double 10 Inch Subwoofer Bluetooth Portable Party Speaker. This manual provides essential information for the safe and efficient operation of your new speaker. Please read this manual thoroughly before using the product and retain it for future reference.

Important Safety Information

WARNING:

This image displays a Proposition 65 warning label. It states that the product may expose users to chemicals, including Butyl Benzyl Phthalate (BBP), known to cause reproductive harm in California. Further information is available at www.P65Warnings.ca.gov.

• Do not expose this appliance to dripping or splashing water.
• Do not place objects filled with liquids, such as vases, on the appliance.
• Ensure proper ventilation. Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the appliance.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this appliance during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Package Contents

Please check the box for the following items:

• beFree Sound BFS-5501 Portable Party Speaker
• Remote Control (requires 2 x AAA batteries, not included)
• Wireless Microphone (requires 2 x AA batteries, not included)
• AC Power Cable

Product Overview

Speaker Components

This image provides an annotated view of the beFree Sound speaker, pointing out its main features: hard-mounted top handles for lifting, a digital control panel with illuminated knobs, dual 10-inch subwoofers that feature reactive party lights, integrated side handles for carrying, and two caster wheels for easy portability. It also indicates support for USB and SD card inputs, Bluetooth connectivity, FM radio, and includes a remote control and a wireless microphone.

• Dual 10-inch Subwoofers: Provide powerful bass with built-in reactive party lights.
• 2.75-inch Tweeters: Two tweeters for clear high-frequency sound.
• Top Control Panel: Features illuminated volume and microphone volume knobs, digital display, and various controls.
• Integrated Handles: Side and top handles for easy transport.
• Caster Wheels: Two wheels at the bottom for convenient mobility.
• Extendable Antenna: 14-inch antenna for FM radio reception.

Control Panel Functions

This image shows a detailed view of the speaker's top control panel. It features two large, illuminated blue knobs for main volume and microphone volume. Various buttons and ports are visible, including controls for previous track/equalizer, play/pause, next track/mode selection, USB input, SD/MMC/MS card slot, microphone volume, treble, bass, echo, and inputs for two microphones (MIC1, MIC2).

• Digital Setting Display: Shows current mode, track information, and FM frequency.
• Volume Knob: Main volume control for the speaker output.
• M.VOL Knob: Controls the volume of the connected microphone(s).
• TREBLE Knob: Adjusts the high-frequency sound output.
• BASS Knob: Adjusts the low-frequency sound output.
• ECHO Knob: Controls the echo effect for microphone input.
• MODE Button: Toggles between Bluetooth, FM Radio, USB, SD, and Line In modes.
• PREV/EQ Button: Short press for previous track; long press for equalizer settings.
• PLAY/PAUSE Button: Plays or pauses audio playback.
• NEXT/MODE Button: Short press for next track; long press to change mode.
• USB Input: For connecting USB flash drives.
• SD/MMC/MS Input: For connecting SD, MMC, or MS memory cards.
• MIC1/MIC2 Inputs: 6.35mm jacks for connecting wired microphones.
• Guitar Input: 6.35mm jack for connecting a guitar.

Rear Panel Connections

This image displays the rear panel of the beFree Sound speaker. It features an extendable antenna, a DC12V input for external power, Line In (L and R) RCA jacks for connecting external audio sources, and a charge indicator light (red for charging, blue for full). Also visible are the model number (BFS-5501) and FCC ID, a separate switch for the reactive lights, a main power ON/OFF switch, and the AC power input (100-240V, 50/60Hz).

• Antenna: Extendable antenna for FM radio reception.
• DC12V Input: For external 12V DC power source.
• Line In (L and R): RCA inputs for connecting external audio devices.
• Charge / Charge Full Indicator: Red light indicates charging, blue light indicates fully charged.
• Light Switch: Separate ON/OFF switch for the reactive party lights.
• Power Switch: Main ON/OFF switch for the speaker.
• AC Power Input: For connecting the included AC power cable (100-240V, 50/60Hz).

Setup

1. Initial Charging: Before first use, connect the speaker to a power outlet using the AC power cable. The "Charge" indicator will light red. Allow the unit to fully charge until the indicator turns blue. This may take several hours.
2. Battery Installation:
   • Remote Control: Open the battery compartment on the back of the remote and insert 2 x AAA batteries, observing polarity (+/-).
   • Wireless Microphone: Open the battery compartment on the microphone and insert 2 x AA batteries, observing polarity (+/-).
3. Placement: Place the speaker on a stable, flat surface. Ensure there is adequate space around the unit for ventilation.

Operating Instructions

Power On/Off

To turn the speaker ON or OFF, use the main Power Switch located on the rear panel of the unit.

Mode Selection

Press the MODE button on the control panel to cycle through available input modes: Bluetooth, FM Radio, USB, SD, and Line In.

Bluetooth Operation

1. Turn on the speaker and select Bluetooth mode using the MODE button. The display will show "BLUE" and the speaker will enter pairing mode.
2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
3. Search for "beFree Sound" or "BFS-5501" in your device's Bluetooth settings.
4. Select the speaker to pair. Once paired, you will hear a confirmation sound.
5. You can now play audio from your device through the speaker.

USB/SD Playback

1. Insert a USB flash drive or SD/MMC/MS card into the corresponding slot on the control panel.
2. The speaker will automatically switch to USB or SD mode and begin playing compatible audio files. If not, press the MODE button to select the correct input.
3. Use the PREV/EQ, PLAY/PAUSE, and NEXT/MODE buttons to control playback.

FM Radio Operation

1. Extend the antenna located on the rear panel for optimal reception.
2. Press the MODE button to select FM Radio mode.
3. Long press the PLAY/PAUSE button to auto-scan and save available FM stations.
4. Use the PREV/EQ and NEXT/MODE buttons to navigate between saved stations.

Microphone and Guitar Input

1. Connect a wired microphone to the MIC1 or MIC2 input, or a guitar to the GUITAR INPUT on the control panel.
2. For the wireless microphone, ensure batteries are installed and the microphone is powered on.
3. Adjust the microphone volume using the M.VOL knob.
4. Use the ECHO knob to add an echo effect to the microphone sound.

Audio Adjustments

Use the TREBLE and BASS knobs on the control panel to fine-tune the sound output to your preference.

Reactive Party Lights

The reactive party lights on the subwoofers can be turned ON or OFF using the dedicated Light Switch located on the rear panel of the speaker.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners or solvents.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: If the remote control or wireless microphone will not be used for a long time, remove the batteries to prevent leakage.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact beFree Sound customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For the most up-to-date support information, please visit the official beFree Sound website or contact their customer service department.