HIWARE 1000ml Glass Teapot with Removable Infuser Instruction Manual

Introduction

Thank you for choosing the HIWARE 1000ml Glass Teapot with Removable Infuser. This manual provides essential information for the safe and efficient use of your new teapot. Please read these instructions carefully before first use and retain for future reference.

Important Safety Instructions

• Always handle the glass teapot with care. Borosilicate glass is durable but can break if subjected to sudden temperature changes or impact.
• Do not fill the teapot beyond its 1000ml capacity when boiling water to prevent overflow.
• When using on a stovetop, use a medium heat source. Avoid high heat settings to prevent damage to the glass.
• The teapot can be used on gas or electric stovetops. It is also microwave safe (ensure no metal parts are inside when microwaving).
• Always use oven mitts or a cloth when handling a hot teapot.
• Keep out of reach of children.
• Inspect the teapot for any cracks or damage before each use. Do not use if damaged.

Product Components

Your HIWARE Glass Teapot set includes the following parts:

• Glass Teapot Body: Made from heat-resistant borosilicate glass with a non-dripping spout and ergonomic handle.
• Removable Infuser: High-grade 18/10 stainless steel mesh filter for loose leaf or blooming teas.
• Lid: Designed to fit both with and without the infuser inserted.

Image: The HIWARE 1000ml Glass Teapot, showcasing its clear borosilicate glass body, ergonomic handle, non-drip spout, and stainless steel infuser.

Setup

1. Unpack: Carefully remove all components from the packaging.
2. Wash: Before first use, wash all parts of the teapot with warm soapy water. Rinse thoroughly and dry.
3. Assemble: Place the stainless steel infuser into the opening of the glass teapot. Ensure it sits securely.
4. Lid Placement: Place the lid on top of the infuser. The lid is designed to fit snugly.

Image: Close-up view of the removable mesh infuser filter being inserted into the teapot, highlighting its handbasket-type disassembly and fine mesh.

Operating Instructions

Brewing Loose Leaf Tea

1. Add Tea: Place your desired amount of loose leaf tea into the stainless steel infuser.
2. Add Water: Pour hot water (or cold water for cold brewing) into the teapot, ensuring the tea leaves in the infuser are fully submerged. Do not exceed the 1000ml capacity.
3. Steep: Place the lid on the teapot and allow the tea to steep for the recommended time according to your tea type.
4. Remove Infuser: Once steeped, carefully remove the infuser using its handle. The lid can then be placed directly on the glass teapot body if desired.
5. Serve: Pour and enjoy your freshly brewed tea. The non-dripping spout ensures a clean pour.

Image: The teapot with the infuser in place, ready for loose leaves and herbs. Below, the infuser is removed, showing a blooming tea flower in the teapot.

Brewing Blooming Tea

1. Remove Infuser: Take out the stainless steel infuser from the teapot.
2. Add Blooming Tea: Gently place the blooming tea flower into the bottom of the glass teapot.
3. Add Water: Carefully pour hot water over the blooming tea.
4. Observe & Steep: Watch the tea flower unfurl. Allow it to steep for the recommended time.
5. Serve: Pour and enjoy the visual and aromatic experience.

Stovetop Use

• The teapot is stovetop safe for gas and electric stoves.
• Use a medium heat setting to heat water or reheat tea. Avoid direct high flame.
• The teapot can also be kept warm on open flame teapot warmers.

Image: The glass teapot placed on a gas stovetop with a medium flame, demonstrating its stovetop safety feature.

Microwave Use

• The glass teapot body is microwave safe.
• Important: Remove the stainless steel infuser and lid before placing the glass teapot in the microwave.

Cold Brewing

• For cold brewing, add tea leaves and cold water to the teapot.
• Place the teapot in the refrigerator for several hours or overnight.

Maintenance and Cleaning

• Dishwasher Safe: The teapot and infuser are dishwasher safe (top rack recommended).
• Hand Washing: For best results and to prolong the life of your teapot, hand wash with warm soapy water. Use a soft sponge or cloth.
• Drying: Ensure all parts are completely dry before storing.
• Stains: For stubborn tea stains, a mixture of baking soda and water can be used.

Image: A hand washing the glass teapot with a sponge under running water, demonstrating ease of cleaning.

Image: The glass teapot and its stainless steel infuser placed on the top rack of a dishwasher, indicating dishwasher safety.

Troubleshooting

Specifications

• Brand: HIWARE
• Model Name: ITS251016
• Item Model Number: Hiware-33-GT
• Capacity: 1000ml (33 Fluid Ounces)
• Material: Borosilicate Glass, 18/10 Stainless Steel
• Color: Clear
• Product Dimensions: 10"D x 6"W x 6"H
• Item Weight: 1.21 Pounds
• Care Instructions: Dishwasher Safe (Top Rack), Hand Wash Recommended
• Heat Compatibility: Stovetop Safe (Gas & Electric, medium heat), Microwave Safe (glass body only), Refrigerator Safe

Warranty and Support

HIWARE is committed to providing high-quality products. If you encounter any issues or are unsatisfied with your teapot, please contact HIWARE customer support directly for assistance. Refer to your purchase documentation for specific warranty details.

For further assistance, visit the official HIWARE Store: HIWARE Store on Amazon

Product Videos