Introduction
This manual provides instructions for the safe and effective use of your JNSupplier 5V AC/DC Wall Charger Power Adapter Cord. This adapter is designed to provide power and charge compatible PIPO Android Tablets, specifically the Max M9 and Max M9 Pro 3G models.
Product Overview
Figure 1: The JNSupplier 5V AC/DC Wall Charger Power Adapter Cord. This image shows the black wall adapter with two flat prongs for North American outlets, connected to a black power cord that terminates in a right-angle barrel connector. The cord is coiled.
The JNSupplier 5V AC/DC Wall Charger Power Adapter is a compact and efficient power solution.
Key Features:
- Input: 100V - 240V AC (Universal Voltage)
- Output: DC 5V, 2000mA (2A) max.
- Built-in Dynamic IC, Charger IC & Power fuse for rapid charging and overcharge protection.
- Short circuit protection.
- Lightweight design with heavy-duty cable-wire.
- Allows simultaneous device use and charging without freezing or entering PC mode.
Setup
Follow these steps to set up your charger:
- Unpack: Carefully remove the charger from its packaging.
- Inspect: Before use, visually inspect the charger and cable for any signs of damage. Do not use if damaged.
- Connect to Tablet: Insert the barrel connector end of the charger cord into the charging port of your compatible PIPO Android Tablet (Max M9, Max M9 Pro 3G). Ensure a firm connection.
- Connect to Power Outlet: Plug the wall adapter prongs into a standard 100V-240V AC wall power outlet.
Important Safety Note: Ensure the power outlet is easily accessible and not overloaded. Do not force the plug into an outlet.
Operating Instructions
Once connected, the charger will automatically begin providing power to your tablet.
- Charging Indication: Your tablet's screen or LED indicator will typically show that it is charging. Refer to your tablet's user manual for specific charging indicators.
- Simultaneous Use: You can continue to use your PIPO tablet while it is connected to the charger. The adapter is designed to prevent the device from freezing or entering PC mode during charging.
- Full Charge: Disconnect the charger once your tablet indicates a full charge to conserve energy.
Maintenance
Proper care will extend the life of your charger.
- Cleaning: Disconnect the charger from the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Handling: Always pull the plug from the outlet, not the cord. Avoid bending or crimping the cable excessively.
Troubleshooting
If you encounter issues with your charger, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Tablet not charging. | Charger not properly plugged in; faulty outlet; tablet charging port issue; incompatible tablet. | Ensure charger is fully plugged into both tablet and wall outlet. Try a different outlet. Verify tablet charging port is clean and undamaged. Confirm your tablet is a compatible PIPO Max M9 or Max M9 Pro 3G model. |
| Charger feels hot. | Normal operation (slight warmth); excessive load; poor ventilation. | A slight warmth is normal. If it's excessively hot, disconnect immediately. Ensure adequate ventilation around the charger. Do not cover it. |
| Tablet charges slowly. | High power consumption by tablet during use; background apps. | Close unnecessary applications on your tablet. Charging will be faster if the tablet is in standby mode or powered off. |
If the problem persists after trying these solutions, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Type | AC Wall Charger Power Adapter |
| Brand | JNSupplier |
| Input Voltage | 100V - 240V AC |
| Output Voltage | DC 5V |
| Output Current | 2000mA (2A) max. |
| Connector Type | Barrel Connector |
| Compatible Devices | PIPO Android Tablet Max M9, PIPO Max M9 Pro 3G |
| Special Features | Short Circuit Protection, Overcharge Protection |
| Item Weight | 0.106 ounces (approx. 3 grams) |
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact JNSupplier customer service directly.
Manufacturer: JNSupplier
ASIN: B01LZEZGCM
Date First Available: October 7, 2016