1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Time Warner Cable RC122 Universal 5-Device Remote Control. This remote is designed to simplify your home entertainment experience by controlling up to five different devices, including set-top boxes and televisions. Please read this manual thoroughly before use to ensure proper functionality and to maximize your remote control's capabilities.
2. Product Overview
The Time Warner Cable RC122 is an infrared (IR) universal remote control capable of managing multiple electronic devices. Its ergonomic design and intuitive button layout facilitate easy navigation and control of your entertainment system.
2.1 Key Features
- Controls up to 5 devices.
- Universal compatibility with various set-top boxes and televisions.
- Infrared (IR) connectivity technology.
- Button control interface.
2.2 Remote Control Layout
Below is an image illustrating the general layout of the RC122 remote control. Familiarize yourself with the button placement for optimal use.
Figure 1: Front view of the Time Warner Cable RC122 Universal Remote Control. This image displays the various buttons for power, channel, volume, menu navigation, and device selection.
3. Setup
3.1 Battery Installation
Before using your remote control, you must install batteries.
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open.
- Insert two fresh AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery compartment cover, ensuring it clicks securely into place.
3.2 Programming the Remote Control
To control your devices, the RC122 remote must be programmed with the correct codes for each device. The programming method typically involves entering a specific code for your device's brand. Refer to the code list provided with your remote or visit the Time Warner Cable support website for a comprehensive list of device codes and detailed programming instructions.
General Programming Steps (may vary):
- Turn on the device you wish to program (e.g., TV, Set-Top Box).
- Press and hold the desired device button (e.g., TV, CBL) on the remote.
- While holding the device button, enter the 3-digit or 4-digit code for your device's brand.
- Release the device button. The device button should blink to confirm successful programming.
- Test the remote by pressing the Power button and other functions. If the device does not respond, try the next code for your brand or consult the online code list.
4. Operating the Remote Control
Once programmed, your RC122 remote can control your devices. Select the appropriate device mode before issuing commands.
4.1 Device Selection
Press the corresponding device button (e.g., TV, CBL, DVD, AUX) to switch the remote into the mode for that device. The selected device button will illuminate briefly.
4.2 Basic Functions
- Power: Turns the selected device on or off.
- Channel Up/Down: Changes channels on your set-top box or TV.
- Volume Up/Down: Adjusts the volume on your TV or audio receiver.
- Mute: Silences the audio.
- Number Pad (0-9): Direct channel entry.
- Menu/Guide: Accesses the on-screen menu or program guide.
- Navigation Arrows (Up/Down/Left/Right) & OK/Select: Navigates through menus and confirms selections.
- Exit/Back: Exits menus or returns to the previous screen.
5. Maintenance
5.1 Cleaning
To clean your remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or immerse the remote in water.
5.2 Battery Replacement
Replace batteries when the remote's performance degrades or if the indicator light does not illuminate when buttons are pressed. Always replace both batteries simultaneously with new AAA alkaline batteries. Dispose of old batteries according to local regulations.
6. Troubleshooting
If you encounter issues with your remote control, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote does not operate any device. | Dead or incorrectly installed batteries. Remote not programmed. | Check battery orientation and replace if necessary. Reprogram the remote for your devices. |
| Remote only operates some devices. | Incorrect device mode selected. Device not programmed. | Press the correct device button (e.g., TV, CBL). Program the remote for the unresponsive device. |
| Buttons do not respond or respond intermittently. | Low batteries. Obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR sensor. |
| Device codes are not working. | Incorrect code used. | Try alternative codes for your device's brand. Consult the manufacturer's website for updated code lists. |
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | RC122 (Internal Model: 47336250) |
| Model Number | EL-PN-47336250 |
| Manufacturer | Time Warner Cable |
| Brand | Electronics More (as listed by retailer) |
| Max Number of Supported Devices | 5 |
| Compatible Devices | Set Top Box, Television |
| Connectivity Technology | Infrared (IR) |
| Controller Type | Button Control |
| Color | Black |
| Item Weight | 0.01 Pounds |
8. Warranty and Support
8.1 Warranty Information
Specific warranty details for the Time Warner Cable RC122 Universal Remote Control may vary depending on the retailer and region of purchase. Please retain your proof of purchase and refer to the warranty documentation provided at the time of purchase. For detailed warranty terms and conditions, contact your retailer or the manufacturer directly.
8.2 Customer Support
For further assistance, programming codes, or troubleshooting not covered in this manual, please visit the official Time Warner Cable support website or contact their customer service department. Contact information can typically be found on their official website or on your service agreement documents.