1. Introduction and Overview
The Beyution CT-90325 is an infrared replacement remote control designed for a wide range of Toshiba television models. This remote requires no programming or setup; simply insert batteries and it is ready for use. It features a lightweight, ergonomic design for comfortable handling and provides a strong infrared signal for reliable operation up to 10 meters (33 feet).
Image 1.1: Front and back view of the CT-90325 remote control.
This manual provides detailed instructions on how to set up, operate, and maintain your CT-90325 remote control, along with troubleshooting tips and product specifications.
2. Setup
2.1 Battery Installation
The CT-90325 remote control requires two (2) AAA alkaline batteries for operation. Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Press down on the latch and slide the battery cover downwards to open it.
- Insert two AAA batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Image 2.1: Rear view of the remote control with the battery compartment.
2.2 Initial Use
No programming or pairing is required for this remote control. Once the batteries are correctly installed, the remote is ready to operate compatible Toshiba televisions. Point the remote directly at the TV's infrared receiver for optimal performance.
3. Operating Instructions
This section outlines the primary functions of the buttons on your CT-90325 remote control.
Image 3.1: Front view of the CT-90325 remote control showing button layout.
- POWER (Red Button): Turns the television on or off.
- INPUT: Cycles through available input sources (e.g., HDMI 1, AV, Component).
- SLEEP: Sets a timer for the TV to automatically turn off.
- FREEZE: Pauses the current image on the screen.
- PIC MODE / PIC SIZE: Adjusts picture modes or aspect ratios.
- Number Buttons (0-9): Directly select channels.
- 100: For selecting channels 100 and above.
- FAV: Accesses favorite channels list.
- VOL (+/-): Increases or decreases the volume level.
- MUTE: Mutes or unmutes the TV audio.
- CH (Up/Down): Changes channels sequentially.
- RECALL: Switches between the current and previously viewed channel.
- C.CAPTION: Toggles closed captions on or off.
- INFO: Displays information about the current program or input.
- Navigation Pad (Up/Down/Left/Right/ENTER): Navigates through menus and confirms selections.
- CH RTN (Channel Return): Returns to the previous channel.
- BACK: Returns to the previous menu or screen.
- MENU: Opens the TV's main menu.
- NEXT: Moves to the next item in a list or menu.
- EXIT: Exits the current menu or function.
- Playback Controls (EJECT, PAUSE/STEP, PLAY, STOP, SKIP, REW, FF): Controls playback functions for connected devices (e.g., DVD player, VCR) if supported by the TV.
4. Maintenance
4.1 Cleaning the Remote
To maintain the remote control's appearance and functionality, clean it regularly:
- Use a soft, dry cloth to wipe the surface of the remote.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not spray cleaner directly onto the remote.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the remote's finish or internal components.
4.2 Battery Replacement
Replace the batteries when the remote's response becomes sluggish or it stops functioning. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries, as this can lead to leakage or damage.
4.3 Storage
If the remote control will not be used for an extended period, remove the batteries to prevent potential leakage and damage to the remote.
5. Troubleshooting
If you encounter issues with your CT-90325 remote control, refer to the following troubleshooting steps:
- Remote is not responding:
- Check if the batteries are installed correctly with the correct polarity (+/-).
- Replace the batteries with fresh AAA alkaline batteries.
- Ensure there are no obstructions between the remote control and the TV's infrared sensor.
- Make sure you are within the effective operating range (up to 10 meters or 33 feet) and pointing the remote directly at the TV.
- Buttons are not working or are sticky:
- Clean the remote control as described in the Maintenance section.
- Ensure the remote has not been exposed to liquids or excessive moisture.
- Limited range or intermittent response:
- Replace the batteries. Low battery power can reduce the remote's effective range.
- Ensure no strong light sources (like direct sunlight or bright fluorescent lights) are interfering with the TV's infrared sensor.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | Beyution |
| Model Name | CT-90325 |
| Connectivity Technology | Infrared |
| Compatible Devices | Toshiba Televisions (various models including 32C110U, 32L1400U, 50L5200U, etc.) |
| Maximum Range | 10 meters (33 feet) |
| Number of Batteries Required | 2 |
| Battery Type | AAA Alkaline |
| Special Feature | Ergonomic design, No programming required |
| Material | High-quality ABS |
| Item Weight | 0.01 Ounces (approximately 0.28 grams) |
| Item Dimensions (L x W x H) | 5"L x 1"W x 0.5"H (approximately 12.7cm x 2.54cm x 1.27cm) |
7. Warranty and Support
7.1 Warranty Information
This Beyution CT-90325 remote control comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for warranty claims.
7.2 Customer Support
For any questions, concerns, or assistance with your Beyution CT-90325 remote control, please contact the seller or manufacturer's customer support. Refer to your purchase documentation for specific contact details. When contacting support, please provide your product model number (CT-90325) and a detailed description of the issue.