Farwind 10 Inch 150N Gas Spring Strut Lift Support User Manual

1. Product Overview

The Farwind 10 Inch 150N Gas Spring Strut Lift Support is designed to assist in opening and holding open cabinet doors, box lids, and similar applications. It provides a smooth and silent operation, preventing lids from slamming shut. Constructed from durable steel and copper, it offers reliable performance and resistance to rust.

Image 1.1: Farwind 10 Inch 150N Gas Spring Strut Lift Support. This image displays the gas spring in its extended state, showing the main cylinder, piston rod, and the two end fittings with mounting plates.

2. Package Contents

Verify that all components are present in the package:

• 1x Gas Strut (150N/33lb)
• 2x Fixing Plate
• 5x Screw

3. Specifications

Image 3.1: Detailed dimensions of the gas spring strut and various installation examples for different opening angles and cabinet depths. This diagram illustrates the extended length, compressed length, and ball socket distance, along with recommended mounting positions for 75°, 90°, and 100° opening angles.

4. Safety Information

• Do not disassemble: The gas spring contains pressurized gas. Attempting to disassemble it can cause injury.
• Avoid extreme temperatures: Do not expose the gas spring to excessive heat or cold, as this can affect its performance and safety.
• Proper installation: Ensure the gas spring is installed correctly and securely according to the instructions to prevent accidental detachment or failure.
• Weight limits: Do not exceed the specified weight limit (33lb / 150N) for the application. Using the strut with heavier loads can lead to premature failure or injury.
• Keep clear: Keep hands and fingers clear of pinch points during operation.

5. Setup and Installation

Proper installation is crucial for the optimal performance and longevity of your gas spring strut. Refer to the provided diagrams for visual guidance.

1. Determine Mounting Position: Carefully assess the desired opening angle and the dimensions of your cabinet door or lid. Refer to Image 3.1 for recommended mounting positions based on opening angles (75°, 90°, 100°). The distance between ball sockets is 245mm (9.6 inches).
2. Mark Pilot Holes: Position the fixing plates on the cabinet frame and the door/lid according to your chosen installation diagram. Use a pencil to mark the locations for the screw pilot holes.
3. Drill Pilot Holes: Drill small pilot holes at the marked locations. Ensure the drill bit size is appropriate for the provided screws to prevent splitting the wood or stripping the screws.
4. Attach Fixing Plates: Securely attach the fixing plates using the provided screws. Ensure they are firmly fastened.
5. Connect Gas Strut: The ball connectors on the gas strut are removable and rotatable, allowing for adjustment of the installation direction. Snap the ends of the gas strut onto the ball studs of the attached fixing plates. A small screwdriver can be used to gently slide the metal retaining bands upwards to ease attachment or detachment.
6. Test Operation: Slowly open and close the cabinet door or lid to ensure smooth operation and proper support. Adjust mounting positions if necessary to achieve the desired opening angle and closing action.

Image 5.1: Close-up view of the ball connectors on the Farwind gas spring strut. This image highlights the design of the ball socket and the fixing plate, demonstrating how the strut connects to the mounting hardware.

Image 5.2: Example of the Farwind gas spring strut installed in an overhead cabinet. The image shows two struts supporting a cabinet door, illustrating a typical application.

6. Operating Instructions

Once installed, the gas spring strut operates automatically:

• Opening: Gently lift the cabinet door or lid. The gas spring will assist in the opening motion and hold the door/lid in the open position, preventing it from falling or slamming shut.
• Closing: Apply gentle downward pressure to the cabinet door or lid. The gas spring will provide a controlled, smooth closing action.

Note on Force Selection: The 150N (33lb) force is suitable for various applications. If you find the door/lid too difficult to close or it does not stay open, you may need to re-evaluate the required force for your specific application. Different force ratings (e.g., 50N, 80N, 100N, 120N) are available for varying weights.

7. Maintenance

The Farwind gas spring strut is designed for minimal maintenance. However, periodic checks can ensure continued optimal performance:

• Inspect Connections: Periodically check that the fixing plates and ball connectors are securely attached and show no signs of loosening or wear.
• Cleanliness: Keep the piston rod clean and free from dirt or debris. Wipe with a soft, dry cloth if necessary. Do not use abrasive cleaners.
• Lubrication: The gas spring is factory-lubricated and generally does not require additional lubrication.
• Functionality Check: Test the opening and closing action regularly to ensure it remains smooth and consistent.

8. Troubleshooting

9. Warranty and Support

For any questions, concerns, or support regarding your Farwind Gas Spring Strut Lift Support, please contact your retailer or the manufacturer directly. Please have your model number (FT0831) and purchase information ready when contacting support.

While specific warranty details are not provided in this manual, most products come with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and conditions.