ShelterLogic AutoShelter Replacement Cover Kit Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the proper installation, use, and maintenance of your ShelterLogic AutoShelter Replacement Cover Kit. This kit is designed to replace the existing cover and end panels for ShelterLogic AutoShelter frames measuring 10 x 20 ft., specifically models 62680 and 32680. The cover is constructed from 100% waterproof, UV-treated fabric to ensure durability and protection against environmental elements.

It is crucial to ensure that your original frame model numbers match those specified for this replacement kit. If you are uncertain, please consult the manufacturer for verification.

Image 1.1: A fully assembled ShelterLogic AutoShelter with the tan replacement cover kit installed.

2. Product Components

The ShelterLogic AutoShelter Replacement Cover Kit includes the following items:

• Cover: Main fabric cover for the shelter frame.
• Rear Panel: One solid fabric panel for the back of the shelter.
• Zipper Door Panel: Two fabric panels with zippers for the front entrance.
• Ratchets: Eight ratchets for securing the cover to the frame.
• Bungee Cords: Two bungee cords for additional securing.

Image 2.1: Visual representation of the cover, solid back panel, double zipper door, bungee cords, and ratchets included in the kit.

3. Setup Instructions

Before beginning installation, ensure you have the correct replacement cover kit for your ShelterLogic AutoShelter frame. It is recommended that two people perform the installation for ease and safety.

1. Prepare the Frame: Ensure your existing ShelterLogic frame is clean, stable, and free from any sharp edges that could damage the new cover. Remove the old cover and any remaining securing hardware.
2. Identify Cover Orientation: Unfold the main cover and identify the front and rear ends. The cover is designed to fit over the frame in a specific orientation.
3. Drape the Main Cover: Carefully drape the main cover over the frame, ensuring it is centered and evenly distributed. Adjust until the cover sits properly on all frame arches.
4. Install End Panels: Attach the solid rear panel to the back of the frame and the two zipper door panels to the front. Ensure all attachment points align with the frame.
5. Secure with Ratchets: Use the provided ratchets to secure the main cover and end panels to the frame. Tighten the ratchets evenly to create a taut fit, but do not overtighten, as this can stress the fabric.
6. Utilize Bungee Cords: Use the bungee cords to further secure any loose flaps or specific sections as needed, following the original shelter's design.
7. Final Inspection: Once installed, inspect the entire cover for proper fit, tension, and security. Ensure all zippers operate smoothly and all panels are correctly attached.

Image 3.1: An installed ShelterLogic AutoShelter providing cover for a vehicle, illustrating the intended use of the cover kit.

4. Operating Instructions

The primary operation of the AutoShelter involves utilizing the zipper door panels for access. Ensure zippers are fully closed when the shelter is not in use to protect contents from weather and debris.

• Opening the Door: Unzip the door panels completely to allow full access.
• Securing Open Doors: If your frame includes tie-backs, use them to secure the door panels in the open position to prevent them from flapping in the wind.
• Closing the Door: Zip the door panels securely to protect the contents of the shelter. Ensure no gaps are present.

5. Maintenance

Regular maintenance will extend the life of your replacement cover kit.

• Cleaning: Clean the cover periodically with mild soap and water. Avoid harsh chemicals or abrasive brushes, which can damage the UV coating and fabric. Rinse thoroughly.
• Inspection: Regularly inspect the cover for any signs of wear, tears, or loose connections. Pay close attention to areas where the cover contacts the frame.
• Tightness: Check the tension of the ratchets and bungee cords periodically. Re-tighten as necessary to maintain a snug fit, especially after strong winds or heavy precipitation.
• Snow Removal: In areas with heavy snowfall, regularly remove snow accumulation from the roof to prevent excessive weight and potential damage to the cover and frame.

6. Troubleshooting

Addressing common issues can help maintain the functionality and longevity of your cover kit.

• Cover Sagging: If the cover appears loose or sags, check and re-tighten all ratchets and bungee cords evenly. Ensure the frame is properly assembled and stable.
• Tears or Punctures: Small tears can often be repaired using a compatible fabric repair kit. For larger damage, consider replacing the affected panel or the entire cover.
• Zipper Malfunction: Ensure zippers are clean and free of debris. Lubricate with a silicone-based spray if they become stiff. Avoid forcing stuck zippers.
• Water Leaks: Verify that all seams are intact and the cover is taut. Ensure no objects are pressing against the cover from the inside, creating pressure points.

7. Specifications

8. Warranty Information

This ShelterLogic AutoShelter Replacement Cover Kit comes with a 1-Year Limited Warranty. This warranty covers manufacturing defects and material flaws under normal use. Please retain your proof of purchase for any warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact ShelterLogic customer support.

Image 8.1: A graphic displaying '1 YEAR LIMITED WARRANTY'.

9. Support and Contact

For further assistance, questions regarding installation, or warranty claims, please contact ShelterLogic customer support. Ensure you have your product model number (90506) and proof of purchase available when contacting support.

You can often find contact information on the manufacturer's official website or through the retailer where the product was purchased.

Image 9.1: The Skin Cancer Foundation Recommended logo, indicating the product's UV protection qualities.