Aquarius 7171 Folded Hand Towel Dispenser Instruction Manual

1. Introduction and Overview

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Aquarius 7171 Folded Hand Towel Dispenser. Designed for hygiene and efficiency, this dispenser is suitable for various professional environments. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.

Figure 1: Aquarius 7171 Folded Hand Towel Dispenser. This image shows the black, wall-mounted dispenser with a smooth, rounded design. A circular window on the front displays the remaining paper towels, and a single towel is visible at the dispensing slot.

2. Product Features

The Aquarius 7171 dispenser incorporates several features designed for user convenience and hygiene:

• Hygienic Design: Features a rounded, smooth, and streamlined design that prevents dust accumulation and facilitates easy cleaning.
• Enclosed Dispensing System: The fully enclosed system ensures users only touch the towel they are using, promoting high hygiene standards.
• High Capacity: Designed to hold a substantial quantity of folded hand towels, reducing the frequency of refills.
• Patented Refilling Device: Ensures smooth and consistent towel dispensing, minimizing blockages and waste.
• Sheet-by-Sheet Dispensing: Delivers interfolded towels one at a time, which helps control usage and reduce waste.
• Hidden Lock: Equipped with a concealed lock for secure refilling and maintenance.
• Level Indicator Window: A transparent window allows for easy monitoring of towel levels, aiding in timely replenishment.
• Wall-Mounted: Designed for secure wall installation to save space and ensure stability.

3. Setup and Installation

The Aquarius 7171 dispenser is designed for wall mounting. While specific mounting hardware and detailed step-by-step instructions are not provided in this manual, general guidelines for secure wall installation should be followed.

3.1 Recommended Tools (Not Included):

• Drill
• Screwdriver
• Measuring tape
• Level
• Pencil
• Appropriate wall anchors and screws for your wall type

3.2 Installation Steps (General Guidance):

1. Select Location: Choose a suitable wall location, ensuring it is at an appropriate height for users and clear of obstructions.
2. Mark Mounting Points: Hold the dispenser against the wall at the desired height. Use a level to ensure it is straight, then mark the positions for the mounting screws through the pre-drilled holes on the back of the dispenser.
3. Drill Holes: Drill pilot holes at the marked positions. Ensure the drill bit size is appropriate for your chosen wall anchors.
4. Insert Anchors: Insert wall anchors into the drilled holes, if required by your wall type.
5. Mount Dispenser: Align the dispenser with the holes and secure it to the wall using screws. Do not overtighten.
6. Test Stability: Gently pull on the dispenser to ensure it is securely mounted to the wall.

4. Operating Instructions

4.1 Opening the Dispenser:

The dispenser features a hidden lock for security. To open, locate the small keyhole (usually on the top or side) and insert the provided key. Turn the key to unlock and open the front cover.

4.2 Loading Paper Towels:

1. Open the dispenser cover using the key.
2. Remove any remaining small towel pieces or debris from the previous pack.
3. Place a new stack of folded hand towels into the dispenser. Ensure the towels are correctly oriented for dispensing.
4. Feed the first towel from the stack through the dispensing mechanism at the bottom of the dispenser.
5. Close the dispenser cover and ensure it locks securely.

Compatible Towel References: The Aquarius 7171 dispenser is compatible with a wide range of Kimberly-Clark Professional folded hand towels, including Kleenex and Scott brands. Recommended references include: 6710, 6659, 6663, 6669, 6677, 6682, 6778, 6789, 3749, 4632. Also compatible with: 6633, 6647, 6649, 6664, 6689, 6764, 6771, 6772, 6773, 6777, 7979.

4.3 Dispensing Paper Towels:

To dispense a towel, simply pull the exposed towel from the bottom slot. The sheet-by-sheet dispensing mechanism will present the next towel for use.

5. Maintenance

5.1 Cleaning:

The dispenser's smooth, rounded design makes it easy to clean. Wipe the exterior surfaces regularly with a damp cloth and a mild, non-abrasive cleaning solution. Avoid harsh chemicals or abrasive scrubbers that could damage the finish.

5.2 Monitoring Towel Levels:

The transparent window on the front of the dispenser allows for quick visual inspection of the remaining towel supply. Replenish towels when the level is low to ensure continuous availability.

6. Troubleshooting

• Towel Jamming:

  If towels are not dispensing smoothly or are jamming:

  • Ensure you are using compatible folded hand towels.
  • Check that the towels are loaded correctly and not overfilled.
  • Open the dispenser and clear any torn or crumpled towel pieces from the dispensing mechanism.
• Dispenser Not Opening:

  If the dispenser cover does not open with the key:

  • Ensure the key is fully inserted and turned correctly.
  • Check for any obstructions around the lock mechanism.
• Dispenser Loose on Wall:

  If the dispenser feels unstable after installation:

  • Re-tighten mounting screws.
  • Verify that appropriate wall anchors were used for your wall material.

7. Specifications

8. Warranty and Support

Information regarding specific warranty terms or direct customer support contacts is not available in the provided product details. For warranty inquiries or technical assistance, please refer to the official Kimberly-Clark Professional website or contact your local distributor.