Ovente BHS8000

Ovente BHS8000 Heart Rate Monitor User Manual

Model: BHS8000 | Brand: Ovente

Introduction

The Ovente BHS8000 Heart Rate Monitor with Chest Strap is designed to provide accurate heart rate measurement, calorie consumption, and fat burnt displays to enhance your training results. It features multiple sub-function displays for tracking workout progress and comes with an adjustable chest strap for comfort and precise heart rate monitoring. The device is water resistant up to 30m and includes Current Time Mode, Chronograph, and Timer Displays.

Ovente BHS8000 Heart Rate Monitor Watch Unit

Image: Ovente BHS8000 Heart Rate Monitor Watch Unit. This image displays the digital watch component of the heart rate monitor, featuring a grey strap, silver-colored bezel, and a clear digital display showing time and date.

Key Features

  • Delivers accurate heart rate measurement for better training results.
  • Calorie consumption and fat burnt displays for easy and precise training.
  • Multiple Sub-function displays that track your workout progress.
  • Comes with an adjustable chest strap for comfort and accurate heart rate measurement.
  • Water resistant up to 30m.
  • Includes Current Time Mode, Chronograph, and Timer Displays.

Setup and First Use

Attaching the Chest Strap

  1. Moisten the Electrodes: Before wearing, moisten the two electrode areas on the back of the chest strap with water or electrode gel. This ensures good conductivity for accurate heart rate detection.
  2. Position the Strap: Place the chest strap directly against your skin, just below your pectoral muscles. The Ovente logo on the strap should be facing upwards.
  3. Adjust for Comfort: Adjust the strap length to ensure a snug but comfortable fit. It should be tight enough not to slip during exercise but not so tight as to restrict breathing.

Initializing the Monitor

  1. Power On: Press and hold the MODE button on the watch unit to power it on.
  2. Pair with Chest Strap: The watch unit will automatically search for the chest strap signal. Ensure the chest strap is worn correctly and moist. Pairing should occur within a few seconds.
  3. Set Personal Data: Follow the on-screen prompts to input your personal data such as age, weight, height, and gender. This information is crucial for accurate calorie and fat burnt calculations. Use the LAP/RESET and ST/STP buttons to navigate and confirm selections.

Operating Instructions

Basic Modes

The Ovente BHS8000 features several operational modes, accessible by pressing the MODE button:

  • Current Time Mode: Displays the current time, day, and date.
  • Chronograph (Stopwatch) Mode: Used for timing activities. Press ST/STP to start/stop, and LAP/RESET to reset or record laps.
  • Timer Mode: Allows setting a countdown timer for specific durations.

Monitoring Heart Rate

Once paired with the chest strap, your heart rate will be displayed in real-time in the designated heart rate monitoring mode. Ensure the chest strap is properly positioned and moist for continuous readings.

Viewing Workout Data

During or after your workout, navigate through the sub-function displays using the appropriate buttons (refer to the specific button functions on your device, typically LAP/RESET or ST/STP) to view:

  • Current Heart Rate
  • Average Heart Rate
  • Maximum Heart Rate
  • Calories Burned
  • Fat Burned
  • Workout Duration

Maintenance and Care

  • Cleaning the Strap: After each use, rinse the chest strap with water and hang it to dry. Do not machine wash or tumble dry. Avoid using harsh chemicals or abrasive cleaners.
  • Cleaning the Monitor: Wipe the watch unit with a soft, damp cloth. Do not submerge the watch unit unless specifically stated for deeper water resistance than 30m.
  • Battery Replacement: When the battery indicator appears low, replace the battery in both the watch unit and the chest strap as per the instructions provided in the full manual (typically a coin cell battery). Ensure proper polarity.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Water Resistance: The device is water resistant up to 30m. This means it can withstand splashes, rain, and brief immersion in water. It is not suitable for swimming or diving.

Troubleshooting

ProblemSolution
No heart rate reading or erratic readings.
  • Ensure electrodes on the chest strap are sufficiently moistened.
  • Check that the chest strap is positioned correctly and snugly against your skin.
  • Verify that the chest strap battery is not depleted.
  • Ensure the watch unit is within range of the chest strap.
  • Avoid strong electromagnetic interference from other electronic devices.
Display is dim or blank.
  • The watch unit battery may be low. Replace the battery.
  • Ensure the device is not exposed to extreme temperatures.
Incorrect calorie or fat burnt calculations.
  • Verify that your personal data (age, weight, height, gender) is accurately entered into the monitor.
  • Ensure consistent heart rate readings during your workout.

Technical Specifications

  • Brand Name: Ovente
  • Model Name: BHS8000
  • Part Number: 2304621
  • ASIN: B01KH31XIC
  • Water Resistance: Up to 30m
  • Functions: Heart Rate Measurement, Calorie Consumption, Fat Burnt Display, Current Time, Chronograph, Timer
  • Strap: Adjustable Chest Strap

Warranty and Support

Ovente products are manufactured with high-quality materials and craftsmanship. This product is covered by a manufacturer's warranty against defects in material or workmanship from the original purchase date. Please refer to the warranty card included with your product for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Ovente Customer Service. Contact information can typically be found on the Ovente official website or on the product packaging.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.