Vivitar DCM106-BLK
Vivitar® DCM106 HD DashCam Digital Camcorder User Manual
Model: DCM106-BLK
Introduction
The Vivitar DCM106 HD DashCam Digital Camcorder is designed to record high-definition video in and around your vehicle. It features a 90-degree lens for wide coverage, a 2.4-inch preview screen, and a G-Sensor for automatic incident detection. This manual provides essential information for setting up, operating, and maintaining your dashcam.
Safety Information
- Ensure the dashcam is securely mounted and does not obstruct your view of the road or interfere with vehicle controls.
- Do not operate the dashcam or adjust settings while driving. Perform all adjustments when the vehicle is safely parked.
- Keep the device away from extreme temperatures, direct sunlight for prolonged periods, and moisture.
- Use only the specified power adapter and accessories to prevent damage and ensure proper operation.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
Package Contents
Please check the box for the following items:
- Vivitar DCM106 HD DashCam Digital Camcorder
- Suction-cup mount
- USB power cable (for car's USB port)
- Lithium Ion Battery (pre-installed or included separately)
- User Manual (this document)
Note: A microSD card is required for recording and is not included.
Product Overview

Figure 1: Front View
This image shows the front of the Vivitar DCM106 DashCam, featuring the main camera lens, infrared lights for night vision, and the Vivitar branding. The adjustable suction cup mount is visible at the top, designed for secure attachment to a windshield or dashboard.

Figure 2: Back View
This image displays the rear of the Vivitar DCM106 DashCam, highlighting the 2.4-inch preview screen. Control buttons are visible on the right side of the screen, used for navigation and settings adjustments. The suction cup mount is also visible from this angle.
Key Components:
- Main Camera Lens: Captures HD video footage.
- Infrared Lights: Assist with night vision recording.
- 2.4" Preview Screen: Displays live view and recorded footage.
- Control Buttons: For menu navigation, recording start/stop, and playback.
- Microphone: Records audio within the vehicle.
- MicroSD Card Slot: For inserting a memory card.
- USB Port: For power connection to the vehicle's USB port.
- Suction-Cup Mount: Secures the dashcam to the windshield or dashboard.
- G-Sensor: Detects sudden impacts or movements and automatically saves footage.
Setup
1. Inserting a MicroSD Card:
- Locate the microSD card slot on the side or bottom of the dashcam.
- Gently insert a compatible microSD card (Class 10 or higher recommended) into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
- To remove, gently push the card in until it clicks, then release, and it will spring out.
2. Mounting the DashCam:
- Clean the desired area on your windshield or dashboard thoroughly.
- Attach the suction-cup mount to the dashcam.
- Press the suction cup firmly against the clean surface and flip the lever to secure it.
- Adjust the angle of the dashcam to ensure a clear view of the road ahead. The camcorder can rotate to face forward or backward.
3. Powering the Device:
- Connect the USB power cable to the dashcam's USB port.
- Plug the other end of the USB cable into your vehicle's USB port or a compatible car charger (not included).
- The dashcam is designed to power on and off with your vehicle's ignition.
Operating Instructions
1. Basic Operation:
- Power On/Off: The dashcam typically powers on automatically when the vehicle starts and powers off when the ignition is turned off. A manual power button may also be present for independent control.
- Recording: Once powered on and a microSD card is inserted, the dashcam usually begins recording automatically. A recording indicator (e.g., a flashing red dot) will appear on the screen.
- Stopping Recording: Press the record button (if applicable) to manually stop recording.
2. Menu Navigation:
Use the control buttons (typically located next to the screen) to navigate through the menu options. Common buttons include Menu, Up, Down, OK/Confirm, and Mode.
- Menu Button: Accesses the settings menu.
- Up/Down Buttons: Navigate through menu options.
- OK/Confirm Button: Selects an option or confirms a setting.
- Mode Button: Switches between video recording, photo mode, and playback mode.
3. Key Settings:
- Resolution: Adjust video quality (e.g., 720p HD).
- Loop Recording: Sets the duration of video segments (e.g., 1, 3, 5 minutes). When the memory card is full, the oldest files will be overwritten.
- G-Sensor Sensitivity: Adjusts the sensitivity of the incident detection. Higher sensitivity means more minor impacts will trigger a save.
- Date/Time Stamp: Ensures recorded videos have the correct date and time overlay.
- Night Vision: Activates or deactivates the night vision feature using the built-in flash.
4. Playback:
- Switch to Playback Mode using the Mode button.
- Use the Up/Down buttons to browse through recorded videos or photos.
- Press the OK/Confirm button to play a selected video or view a photo.
- Videos saved by the G-Sensor are typically stored in a separate, protected folder to prevent overwriting.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the dashcam's lens and screen. Do not use liquid cleaners or abrasive materials.
- MicroSD Card Care: Periodically format the microSD card within the dashcam's settings to maintain optimal performance and prevent data corruption. Back up important footage before formatting.
- Storage: When not in use for extended periods, store the dashcam in a cool, dry place away from direct sunlight.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Dashcam does not power on. |
|
| Recording stops unexpectedly or "Card Full" error. |
|
| Video footage is blurry or unclear. |
|
| Date and time settings reset. |
|
Specifications
- Model: DCM106-BLK
- Video Resolution: 720p HD
- Lens Angle: 90-degree
- Screen Size: 2.4 inches
- Storage: MicroSD card slot (card not included)
- Special Features: G-Sensor (Incident Detection), Night Vision, Loop Recording
- Power Source: Vehicle's USB port (via USB cable), Internal Lithium Ion Battery
- Dimensions: Approximately 1.34 x 1.34 x 1.34 inches
- Weight: Approximately 9.7 ounces
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Vivitar website. Keep your proof of purchase for warranty claims.
Vivitar products are typically covered by a limited warranty against defects in materials and workmanship. Specific terms and conditions may vary.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.