1. Introduction
Thank you for choosing the Powerzone D4000TH Shatter-Resistant Work Light. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your work light. Please read this manual thoroughly before using the product and retain it for future reference.
1.1. Safety Information
- Always ensure the work light is unplugged before performing any maintenance or cleaning.
- Do not operate the light with a damaged cord or plug.
- Avoid direct eye exposure to the LED light source.
- Keep the work light away from flammable materials.
- This product is designed for indoor and outdoor use, but avoid submerging it in water.
- Ensure the power source matches the specified voltage (100-240 V).
2. Package Contents
Verify that all items listed below are present in your package:
- Powerzone D4000TH Work Light Unit
- Adjustable Stand (if included with your model)
- 6-foot AC Power Cord
- User Manual (this document)
3. Setup
3.1. Unpacking
Carefully remove all components from the packaging. Inspect the work light and accessories for any signs of damage. If any damage is found, do not use the product and contact customer support.
3.2. Attaching the Stand
If your model includes a stand, follow these steps to attach it:
- Align the mounting holes on the work light unit with the corresponding holes on the stand bracket.
- Secure the light unit to the stand using the provided screws and fasteners. Ensure all connections are tight.
- Adjust the stand to the desired height and angle, then tighten any locking mechanisms.
Figure 1: Powerzone D4000TH Work Light with its stand, illustrating the assembled unit ready for use.
3.3. Connecting Power
Plug the 6-foot AC power cord into a standard electrical outlet (100-240 V). Ensure the outlet is properly grounded.
4. Operation
4.1. Turning On/Off
Locate the power switch on the work light unit. Press the switch to turn the light ON. Press it again to turn the light OFF.
4.2. Positioning the Light
Adjust the angle of the light head on the stand to direct illumination where needed. The shatter-resistant polycarbonate lens ensures durability in various work environments.
5. Maintenance
5.1. Cleaning
To clean the work light, first unplug it from the power source. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate lens or housing.
5.2. Storage
When not in use, store the work light in a dry, cool place, away from direct sunlight and extreme temperatures. Coil the power cord neatly to prevent damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the unit. | Check if the power cord is securely plugged into a working outlet. Verify the power switch is in the ON position. |
| Light is dim or flickers. | Unstable power supply or internal issue. | Try plugging the light into a different outlet. If the problem persists, contact customer support. |
| Stand is unstable. | Loose connections or improper assembly. | Ensure all screws and fasteners for the stand are tightened. Place the stand on a flat, stable surface. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | D4000TH |
| Brand | Powerzone |
| Light Source Type | LED |
| Power Input | 100 - 240 V |
| Wattage | 42 W |
| Lens Material | Shatter-Resistant Polycarbonate (PC) |
| Cord Length | 6 feet |
| Item Weight | 13.8 Pounds |
| Color | White |
| UPC | 810055015221 |
8. Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or contact Powerzone customer service. Keep your purchase receipt as proof of purchase.
For further assistance, please visit the official Powerzone website or contact their customer support line.