Brother PTH110
Brother P-Touch PTH110 Label Maker User Manual
Model: PTH110 | Brand: Brother
Introduction
The Brother P-Touch PTH110 is a portable and lightweight monochrome label maker designed for ease of use in both office and personal environments. It features a QWERTY keyboard for simple text input and a graphical display for reviewing label content before printing. This device supports various customization options, including multiple fonts, frames, and symbols, and prints on Brother Genuine P-touch TZe tapes up to 12mm wide. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your PTH110 label maker.
Image: The Brother P-Touch PTH110 label maker, showcasing its compact design and QWERTY keyboard, with a label displaying 'Easy to Use' on its screen.
What's in the Box
Upon unboxing your Brother P-Touch PTH110, verify that all the following components are included:
- PTH110 label maker unit
- One black on white TZe starter tape (0.47" / 12mm x 13.1' / 4m)
- User guide (this document)
Please note that 6 AAA batteries or an optional AC adapter are required for operation and are sold separately.
Setup
1. Power Source Installation
The PTH110 label maker can be powered by either 6 AAA alkaline batteries or an optional Brother AC adapter (AD-24ES). Batteries are not included with the unit.
- For Battery Installation:
- Ensure the label maker is turned off.
- Locate the battery compartment cover on the back of the unit.
- Slide the cover off.
- Insert 6 new AAA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Replace the battery compartment cover.
- For AC Adapter Use (Optional):
- Ensure the label maker is turned off.
- Insert the plug of the optional Brother AC adapter (AD-24ES) into the AC adapter jack on the side of the label maker.
- Plug the AC adapter into a standard electrical outlet.
2. Tape Cartridge Installation
The PTH110 uses Brother TZe tape cartridges. A starter tape is included.
- Ensure the label maker is turned off.
- Open the tape compartment cover located on the top-left side of the unit.
- Insert the TZe tape cartridge with the tape facing the print head, ensuring it clicks firmly into place. The tape should feed smoothly into the slot.
- Close the tape compartment cover.
Image: A close-up view of hands inserting a TZe tape cartridge into the designated slot of the Brother P-Touch PTH110 label maker, demonstrating the tape installation process.
Operating Instructions
1. Turning On/Off
- Press the Power button (red circle with line) to turn the label maker on.
- Press the Power button again to turn it off. The unit will also automatically power off after a period of inactivity to conserve battery life.
2. Typing and Editing Text
- Use the QWERTY keyboard to type your desired text.
- Use the arrow keys (< and >) to move the cursor.
- Press Clear to delete the last character. Hold Clear to delete all text.
- To enter a second line of text, press the Enter key (often labeled with a bent arrow or similar symbol). The PTH110 supports printing one or two lines of text.
3. Formatting Labels
The PTH110 offers various formatting options accessible via one-touch keys:
- Font: Press the Font key to cycle through 3 available fonts.
- Size: Press the Size key to adjust text size.
- Style: Press the Style key to apply various text styles (e.g., bold, italic, outline).
- Frame: Press the Frame key to select from 14 decorative frames.
- Symbols: Access over 250 symbols by pressing the Symbol key (often accessed via a Shift or Function key combination).
- Cable Labeling: Use the Cable key for specialized cable wrapping labels.
Image: An illustration of various labels created with the PTH110, demonstrating the use of different fonts, frames, and symbols to customize label appearance.
4. Previewing and Printing Labels
- Preview: Before printing, press the Preview key to view how your label will appear on the graphical display.
- Print: Once satisfied with the preview, press the Print key. The label maker will print the label and automatically cut it.
5. Memory Feature
The PTH110 can store up to 15 frequently used labels for quick reprinting.
- Saving a Label: After creating a label, navigate to the Menu and select the "Save" option. Follow the on-screen prompts to save it to a memory slot.
- Recalling a Label: Press the Menu key, select "Recall" or "Memory", and choose the desired saved label to load it for editing or printing.
Image: A hand applying a label, printed by the PTH110, to a clear storage bin, demonstrating the practical application of the label maker for organization.
Maintenance
Regular maintenance ensures optimal performance and longevity of your PTH110 label maker.
- Cleaning the Unit:
- Turn off the label maker and disconnect the AC adapter if in use.
- Wipe the exterior of the unit with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water and mild detergent, then wipe dry immediately.
- Do not use alcohol, benzene, thinner, or any abrasive cleaners, as these can damage the casing.
- Cleaning the Print Head:
- If print quality degrades (e.g., lines missing), the print head may need cleaning.
- Open the tape compartment cover and remove the tape cartridge.
- Gently wipe the print head (the small black rectangular component) with a cotton swab dampened with isopropyl alcohol. Allow it to dry completely before reinserting the tape.
- Cleaning the Cutter Blade:
- If the tape does not cut cleanly, the cutter blade may have adhesive residue.
- With the tape compartment open, carefully use a cotton swab dampened with isopropyl alcohol to clean any residue from the cutter blade area. Be cautious as the blade is sharp.
Troubleshooting
This section addresses common issues you might encounter with your PTH110 label maker.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | Batteries are dead or incorrectly inserted; AC adapter not connected properly. | Replace batteries with new ones, ensuring correct polarity. Check AC adapter connection to unit and outlet. |
| "No Tape" message displayed. | Tape cartridge is not installed correctly or is empty. | Ensure the tape cartridge is fully inserted and clicks into place. Replace with a new TZe tape cartridge if empty. |
| Print quality is poor (faint, lines missing). | Print head is dirty; tape cartridge is old or damaged. | Clean the print head as described in the Maintenance section. Try a new tape cartridge. |
| Label does not feed or cut properly. | Tape jam; cutter blade is dirty or dull. | Open the tape compartment and clear any jammed tape. Clean the cutter blade. If issues persist, the cutter unit may need service. |
| "Low Battery" message displayed. | Batteries are running low. | Replace all 6 AAA batteries with new ones, or use the optional AC adapter. |
Specifications
Detailed technical specifications for the Brother P-Touch PTH110 label maker:
- Model Name: PTH110
- Product Dimensions: 4.3"D x 8"W x 2.2"H
- Item Weight: 1 pound (approximately 16 ounces)
- Printing Technology: Thermal Transfer
- Printer Output: Monochrome
- Maximum Black and White Print Resolution: 180 dpi
- Max Print Speed Monochrome: 2 mm/second
- Compatible Tape Widths: Up to 12 mm (0.47 inches) TZe tapes
- Display Type: LCD Graphical Display
- Keyboard Type: QWERTY
- Fonts: 3
- Frames: 14
- Symbols: Over 250
- Memory: Stores up to 15 labels
- Power Source: 6 AAA batteries (not included) or optional AC adapter (AD-24ES, sold separately)
- Control Method: Push Button
- Connectivity Technology: USB (for potential future firmware updates, not for direct printing from PC)
- Included Components: PTH110 label maker, User guide, black on white TZe starter tape 0.47" (12mm) x 13.1' (4m)
Warranty and Support
The Brother P-Touch PTH110 label maker comes with a limited warranty. For specific details regarding the warranty period and coverage, please refer to the warranty card included with your product or visit the official Brother support website.
For further assistance, technical support, or to purchase accessories and replacement supplies (such as TZe tapes or the AC adapter), please contact Brother Customer Service or visit their official website:
- Official User Guide (PDF): Download User Guide
- Brother Support Website: Refer to your product packaging or the official Brother website for the most current support contact information and resources.