Bulova 98A162

Bulova CURV Chronograph Watch 98A162 Instruction Manual

Model: 98A162

1. Product Overview

The Bulova CURV Chronograph Watch 98A162 features the world's first curved chronograph movement, designed for an ergonomic fit on the wrist. This timepiece combines a fully curved titanium and stainless steel case with a dark PVD coating, offering a sophisticated gunmetal or black metallic finish. The dark grey exhibition dial showcases the visible high-performance quartz movement, operating at an ultra-high frequency of 262 kHz for exceptional precision. Rose gold-tone accents and luminous hands enhance readability and style. The watch is secured with a comfortable black silicone strap and is water resistant to 30 meters.

Bulova CURV Chronograph Watch 98A162 front view

Image 1: Front view of the Bulova CURV Chronograph Watch 98A162, showcasing its curved case and dark grey dial with rose gold-tone accents.

2. Setup

2.1 Setting the Time and Date

  1. Pull the Crown: Gently pull the crown (the knob on the side of the watch) out to position 2 for setting the date, or position 3 for setting the time.
  2. Adjust Date: In position 2, turn the crown clockwise or counter-clockwise to set the correct date.
  3. Adjust Time: In position 3, turn the crown to move the hour and minute hands to the correct time. Ensure you differentiate between AM and PM for watches with a date function, as the date typically changes around midnight.
  4. Push the Crown Back: Once the time and date are set, push the crown back into position 1 (normal operating position) to start the watch.

2.2 Adjusting the Silicone Strap

The black silicone strap is designed for comfort and features a buckle closure. To adjust the fit, simply move the buckle pin to the desired hole on the strap. Ensure the watch is snug but not too tight, allowing for comfortable wear throughout the day.

Side view of Bulova CURV Chronograph Watch 98A162 on a wrist

Image 2: Side view of the watch on a wrist, highlighting the curved case design and the silicone strap.

3. Operating the Watch

3.1 Chronograph Function

This watch is equipped with a chronograph function for measuring elapsed time. It features sub-dials for seconds, minutes, and hours.

  • Start/Stop: Press the top pusher button (typically at the 2 o'clock position) to start and stop the chronograph.
  • Reset: With the chronograph stopped, press the bottom pusher button (typically at the 4 o'clock position) to reset all chronograph hands to zero.

3.2 Sub-Dials

The watch features multiple sub-dials on its face. These typically include a 60-second sub-dial, a 60-minute sub-dial, and a 24-hour sub-dial, which are part of the chronograph function and time display.

4. Maintenance

4.1 Water Resistance

The Bulova CURV Chronograph Watch 98A162 is water resistant to 30 meters (3 ATM). This rating means the watch is suitable for daily use and can withstand splashes or brief immersion in water, such as washing hands or rain. It is not suitable for swimming, showering, or diving. Avoid operating the crown or pushers when the watch is wet to prevent water intrusion.

4.2 Cleaning

To maintain the appearance of your watch:

  • Wipe the case and crystal with a soft, damp cloth.
  • For the silicone strap, use mild soap and water, then rinse thoroughly and dry completely.
  • Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish.

4.3 Battery Replacement

This watch is powered by a high-performance quartz movement, which requires a CR2 battery. Battery life varies, but typically lasts several years. When the battery needs replacement, it is recommended to take the watch to an authorized Bulova service center or a qualified watchmaker to ensure proper sealing and maintain water resistance.

Back view of Bulova CURV Chronograph Watch 98A162

Image 3: Rear view of the watch, showing the exhibition case back and the curved movement.

5. Troubleshooting

  • Watch Not Running: Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement.
  • Incorrect Time/Date: Refer to the 'Setting the Time and Date' section (2.1) to re-adjust.
  • Chronograph Not Resetting to Zero: This may indicate a need for recalibration or service. Consult an authorized service center.
  • Condensation Under Crystal: This indicates a potential breach in water resistance. Seek immediate professional service to prevent further damage.

6. Specifications

FeatureDetail
Model Number98A162
Case MaterialTitanium and Stainless Steel with Dark PVD Coating
Case Diameter44 mm
Case Thickness10.1 mm
CrystalCurved Sapphire Crystal
Movement TypeHigh-Performance Quartz (262 kHz)
Band MaterialBlack Silicone Strap
Water Resistance30 Meters (3 ATM)
Dial ColorDark Gray Exhibition Dial
Additional FeaturesChronograph, Luminous Hands, Rose Gold-Tone Accents
Clasp TypeBuckle Closure
Battery1 CR2 battery (included)

7. Warranty and Support

This Bulova watch comes with a manufacturer's warranty. For specific warranty terms, duration, and service procedures, please refer to the warranty card included with your purchase or visit the official Bulova website. For technical support, repairs, or any inquiries, please contact an authorized Bulova service center.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.