1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the CLE Ticket Dispenser, model CL-002Q-270. Designed for arcade games and similar applications, this device reliably dispenses tickets. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the device:
- Ensure the power supply matches the specified input voltage (12V DC).
- Disconnect power before performing any installation, maintenance, or troubleshooting.
- Do not expose the device to moisture or extreme temperatures outside its operational range (20 - 65 Degree Celsius).
- Only qualified personnel should perform repairs or modifications.
- Keep hands clear of moving parts during operation.
3. Product Overview
The CLE CL-002Q-270 is a robust ticket dispenser designed for high-volume use in arcade environments. It features a durable metal casing and an integrated circuit board for reliable performance.
Figure 3.1: Side view of the CLE Ticket Dispenser CL-002Q-270, showing the internal circuit board and mechanical components.
Figure 3.2: Another side view of the CLE Ticket Dispenser CL-002Q-270, highlighting the product label with key specifications.
4. Setup & Installation
Follow these steps for proper installation of your ticket dispenser:
- Mounting: Secure the ticket dispenser within the arcade cabinet using appropriate screws and nuts. Ensure it is firmly attached to prevent vibration during operation.
- Power Connection: Connect the dispenser to a stable 12V DC power supply. Verify the polarity before connecting to avoid damage. The input voltage should be 12V ±5% DC.
- Signal Connection: Connect the signal wires from your arcade game's control board to the dispenser's input. Refer to your game machine's manual for specific wiring diagrams.
- Ticket Loading: Load the appropriate tickets into the dispenser's hopper. Ensure tickets are aligned correctly and not jammed.
Figure 4.1: Example of mounting accessories (screws, nuts, washers) typically used for installation.
5. Operation
Once installed and powered, the CLE Ticket Dispenser operates automatically in response to signals from the arcade game. When the game sends a dispense command, the unit will release tickets.
- Dispensing Speed: The dispenser is designed to operate at a speed of 95-100 pieces per minute.
- Ticket Jam: If tickets fail to dispense, check for jams in the ticket path and ensure the ticket stack is properly loaded.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your ticket dispenser.
- Cleaning: Periodically clean the ticket path and rollers to remove dust, paper residue, and debris. Use a soft, dry cloth. Do not use liquid cleaners directly on electronic components.
- Inspection: Regularly inspect all moving parts for wear and tear. Check electrical connections for looseness or corrosion.
- Lubrication: Moving mechanical parts may require light lubrication with a suitable lubricant as per manufacturer recommendations (if any).
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser not powering on | No power supply; incorrect voltage; loose connection | Check power cable connection; verify 12V DC supply; ensure connections are secure. |
| Tickets not dispensing | Ticket jam; empty hopper; signal issue from game; faulty mechanism | Clear any jammed tickets; refill tickets; check signal wiring; inspect mechanical parts for damage. |
| Inconsistent dispensing | Worn rollers; dirty ticket path; incorrect ticket type | Clean ticket path and rollers; ensure correct ticket dimensions are used; consider replacing worn parts. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | CL-002Q-270 |
| Input Voltage | 12V ±5% DC |
| Power Consumption | 3W |
| Current Consumption | 1.2A (MAX) |
| Operation Temperature | 20 - 65 Degree Celsius |
| Dispensing Speed | 95 - 100 pcs/min |
| Item Weight | 5 Pounds |
| Manufacturer | CL Electronics |
9. Warranty & Support
For warranty information or technical support, please contact your vendor or the manufacturer, CL Electronics. Keep your purchase receipt as proof of purchase.
Manufacturer: CL Electronics