Introduction
Thank you for choosing the Roundhill Furniture Rene Round Wood Pedestal Side Table. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new furniture piece. Please read these instructions carefully before beginning assembly and retain them for future reference.
The Rene Round Pedestal Side Table is designed to offer a sophisticated and functional accent to any room. Its durable construction and elegant design make it suitable for various indoor settings.
Safety Information
WARNING: To prevent tipping, place this table on a stable, level surface. Do not place heavy objects on the table that exceed the maximum weight recommendation of 30 pounds. Keep the table away from heat sources and open flames to prevent fire risk. Ensure all connections are securely tightened before use. Periodically check and re-tighten all fasteners as needed.
- Always assemble the product on a soft, clean surface to prevent scratches.
- Keep small parts away from children during assembly.
- Do not stand or sit on the table.
- Use only the provided hardware for assembly.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
| Part | Description | Quantity |
|---|---|---|
| A | Tabletop | 1 |
| B | Pedestal Base | 1 |
| C | Leg Assembly | 1 |
| D | Hardware Pack (Bolts, Washers, Wrench) | 1 |
Assembly Instructions
Assembly is required for this product. A wrench is recommended for assembly. Please follow these steps carefully.
- Step 1: Prepare the Leg Assembly
Carefully unbox all components. Place the Leg Assembly (C) upside down on a soft, clean surface to protect the finish. - Step 2: Attach the Pedestal Base
Align the Pedestal Base (B) with the top of the Leg Assembly (C). Ensure the pre-drilled holes match. Insert the bolts from the Hardware Pack (D) through the Leg Assembly and into the Pedestal Base. Hand-tighten all bolts initially.
Image: Detail of the assembled pedestal base and scrolled legs.
- Step 3: Secure the Pedestal Base
Using the provided wrench from the Hardware Pack (D), fully tighten all bolts connecting the Pedestal Base (B) to the Leg Assembly (C). Do not overtighten. - Step 4: Attach the Tabletop
Carefully place the Tabletop (A) upside down on a soft, clean surface. Align the assembled Pedestal Base (B) and Leg Assembly (C) with the mounting plate on the underside of the Tabletop (A). Ensure the holes align. Insert the remaining bolts from the Hardware Pack (D) and hand-tighten. - Step 5: Final Tightening
Using the wrench, fully tighten all bolts connecting the Tabletop (A) to the Pedestal Base (B). Do not overtighten. - Step 6: Upright the Table
With assistance, carefully turn the assembled table upright and place it in its desired location. Ensure it is stable and level.
Image: The fully assembled Rene Round Wood Pedestal Side Table.
Usage
The Rene Round Wood Pedestal Side Table is designed for indoor use as an accent table, end table, or display surface. It can hold decorative items, lamps, books, or beverages. Ensure that items placed on the table do not exceed the maximum weight capacity of 30 pounds.
Image: The side table in use, displaying decorative items.
Care and Maintenance
- Cleaning: Wipe the table surface with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Spills: Blot spills immediately with a clean, dry cloth to prevent staining or water damage.
- Heat and Moisture: Use coasters under hot or cold beverages and placemats under decorative items to protect the surface from heat, moisture, and scratches.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the finish.
- Moving: When moving the table, always lift it rather than dragging it to prevent damage to the legs and floor.
- Fasteners: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Loose bolts or uneven floor surface. | Check and tighten all assembly bolts. Ensure the table is placed on a flat, level surface. Use furniture glides or shims if necessary. |
| Parts do not align during assembly | Incorrect orientation of parts or overtightened bolts. | Loosen all bolts, re-align parts according to instructions, then gradually tighten. Ensure parts are not forced. |
| Scratches on surface | Improper handling or abrasive contact. | Use furniture polish or touch-up pens designed for antique white wood finishes. Prevent future scratches by using coasters and felt pads. |
Specifications
- Model Name: Rene
- Model Number: OE0024WH
- Color: Antique White
- Product Dimensions (D x W x H): 26" x 26" x 26.5"
- Item Weight: 32 Pounds
- Maximum Weight Recommendation: 30 Pounds
- Frame Material: Resin
- Top Material Type: Hardwood topped with Wood Veneer, Plywood/Laminate Board
- Base Material: Rubberwood
- Assembly Required: Yes
- Tools Recommended for Assembly: Wrench (included in hardware pack)
- Indoor/Outdoor Usage: Indoor
Image: Dimensional diagram of the Rene Side Table.
Warranty and Support
This Roundhill Furniture product comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact Roundhill Furniture customer support.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Roundhill Furniture customer service. Please have your model number (OE0024WH) and purchase information ready when contacting support.
For more information, visit the official Roundhill Furniture Store.
