1. Introduction
This manual provides essential information for the safe and efficient use of your AOC M2261FWH 21.5-inch LED Monitor. Please read it thoroughly before installation and operation, and retain it for future reference.
Image: The AOC M2261FWH 21.5-inch LED Monitor, featuring a black bezel and stand with a red accent. The screen displays a vibrant image of a woman in a red dress next to a wine glass.
2. Safety Information
- Ensure the monitor is placed on a stable, flat surface to prevent accidental falls.
- Do not block ventilation openings. Proper airflow is crucial to prevent overheating.
- Use only the power adapter and cables supplied with the monitor.
- Avoid exposing the monitor to moisture or extreme temperatures.
- Disconnect the power cable from the outlet before cleaning or if the monitor will be unused for an extended period.
- Do not attempt to service the monitor yourself. Refer all servicing to qualified personnel.
3. Package Contents
Verify that all items are present in the package:
- AOC M2261FWH Monitor
- Power Cable
- VGA Cable
- User Guide (this document)
- Manuals (additional documentation)
4. Setup
4.1 Assembling the Stand
- Carefully remove the monitor and stand components from the packaging.
- Attach the stand base to the stand neck, securing it with the provided screw.
- Connect the assembled stand to the back of the monitor until it clicks into place or is secured with screws, depending on the model's design.
- Place the monitor on a stable, level surface.
4.2 Connecting Cables
- Power Connection: Connect the power cable to the monitor's power input, then plug the other end into a grounded electrical outlet.
- Video Connection:
- HDMI: Connect one end of an HDMI cable to the HDMI port on your computer's graphics card and the other end to the HDMI input on the monitor.
- VGA (D-sub): Connect one end of the 15-pin D-sub (VGA) cable to your computer's VGA output and the other end to the VGA input on the monitor.
- Ensure all connections are secure.
5. Operating Instructions
5.1 Powering On/Off
- Press the power button located on the monitor to turn it on. The power indicator light will illuminate.
- Press the power button again to turn the monitor off.
5.2 On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various monitor settings. Use the physical buttons on the monitor (typically located on the bottom or back) to navigate and select options.
- Menu Button: Activates or exits the OSD menu.
- Navigation Buttons: Used to move up/down or left/right through menu options.
- Select/Enter Button: Confirms a selection or enters a sub-menu.
5.3 Adjusting Settings
Common adjustable settings include:
- Brightness: Adjusts the overall luminance of the screen.
- Contrast: Controls the difference between the lightest and darkest areas of the image.
- Input Select: Manually switch between HDMI and VGA inputs.
- Color Settings: Adjust color temperature, gamma, and individual RGB levels.
- Image Settings: Fine-tune sharpness, aspect ratio, and other display characteristics.
6. Maintenance
6.1 Cleaning the Screen
- Turn off the monitor and unplug the power cable.
- Use a soft, lint-free cloth lightly dampened with water or a specialized screen cleaner.
- Gently wipe the screen surface. Avoid applying excessive pressure.
- Do not use alcohol, ammonia, or abrasive cleaners, as these can damage the screen coating.
6.2 Cleaning the Cabinet
- Use a soft, dry cloth to wipe the monitor's casing.
- For stubborn dirt, a lightly dampened cloth can be used, followed by a dry cloth.
7. Troubleshooting
If you encounter issues with your monitor, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Power cable disconnected; Video cable disconnected; Incorrect input selected | Check power and video cable connections; Ensure monitor is powered on; Select correct input source via OSD menu. |
| Image is blurry or distorted | Incorrect resolution; Loose video cable; Graphics driver issue | Set display resolution to 1920 x 1080; Reconnect video cable; Update graphics drivers on your computer. |
| Monitor not turning on | No power to monitor; Faulty power cable | Check power outlet; Ensure power cable is securely connected; Try a different power cable if available. |
| Colors appear incorrect | Color settings misconfigured; Faulty video cable | Adjust color settings in the OSD menu; Try a different video cable. |
8. Specifications
Key technical specifications for the AOC M2261FWH monitor:
- Brand: AOC
- Model: M2261FWH
- Screen Size: 21.5 Inches
- Panel Type: LED
- Resolution: 1920 x 1080 (Full HD)
- Response Time: 2 Milliseconds
- Typical Contrast Ratio: 1000:1
- Input Connectors: 1 x HDMI, 1 x 15-pin D-sub (VGA)
- Product Dimensions (LxWxH): 21.5 x 50 x 37.2 cm
- Item Weight: 3.51 kg
- Voltage: 240 Volts
- Wattage: 22 Watts
9. Warranty and Support
Your AOC M2261FWH monitor comes with a 3 Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures repair or replacement of the product under normal use conditions.
For technical support, warranty claims, or service inquiries, please contact AOC customer service through their official website or the contact information provided in your warranty documentation. Please have your monitor's model number and serial number ready when contacting support.
