Introduction
This manual provides instructions for the proper installation and use of PRIME-LINE L 5908 Plastic Screen Clips. These clips are designed to securely hold aluminum screen frames, window screens, storm windows, and storm door panels in place. Please read these instructions carefully before beginning installation.
Product Overview
The PRIME-LINE L 5908 Plastic Screen Clips are flush-fitting fasteners made from durable plastic. They are black in color and designed for a 13/16 inch reach. Each package includes the necessary screen clips and #8 x 3/4 inch screws for installation.
Figure 1: A photo of the L 5908 Plastic Screen Clips, illustrating their design and included screws.
Setup and Installation
Tools Required:
- Screwdriver (Phillips head recommended)
- Measuring tape or ruler
- Pencil or marker
Installation Steps:
- Prepare the Surface: Ensure the window frame or door panel where the screen will be mounted is clean and free of debris.
- Position the Screen/Panel: Place the screen frame, storm window, or storm door panel into its desired opening. Ensure it is flush and properly seated.
- Mark Clip Locations: Hold a screen clip against the frame and the window/door opening. Use a pencil or marker to mark the screw hole locations on the window/door frame. It is recommended to use at least four clips per screen/panel, one near each corner. For larger screens, additional clips may be necessary along the sides.
- Attach Clips: Using a screwdriver, securely fasten the screen clips to the marked locations on the window/door frame with the provided #8 x 3/4 inch screws. Ensure the clips are oriented to hold the screen frame securely.
- Test Fit: Carefully insert the screen frame or panel into the clips to ensure a snug and secure fit. Adjust clip positions if necessary.
Operation and Usage
Once installed, the PRIME-LINE L 5908 Plastic Screen Clips provide a secure and flush attachment for your screens or panels. To remove a screen or panel, gently disengage it from the clips. Re-installation involves aligning the screen/panel with the clips and pressing it into place.
Maintenance
These plastic screen clips require minimal maintenance. Periodically inspect the clips for any signs of wear, cracking, or damage. If a clip is damaged, replace it immediately to maintain the security of your screen or panel. Clean clips with a damp cloth if dirt or grime accumulates.
Troubleshooting
- Screen/Panel is Loose:
- Ensure all clips are securely fastened to the frame.
- Check if enough clips are used for the size of the screen/panel. Add more clips if necessary.
- Verify that the clips are correctly aligned and engaging with the screen frame.
- Difficulty Installing Screen/Panel:
- Check for obstructions around the window/door opening.
- Ensure the screen/panel dimensions are compatible with the opening and the clip's reach.
- Verify that the clips are not overtightened, which could deform them.
Specifications
| Model Number | L 5908 |
| Material | Plastic |
| Color | Black (Note: Product description states Black, while specifications sometimes list Gray. Following description for consistency.) |
| Reach | 13/16 inch |
| Design | Flush-fitting (no offset) |
| Included Components | Screen clips, #8 x 3/4 inch screws |
| Item Weight | 0.784 ounces (per package) |
| Product Dimensions | 1 x 1.88 x 4.81 inches (package dimensions) |
Warranty Information
Specific warranty details for PRIME-LINE L 5908 Plastic Screen Clips are not provided in the product information. For warranty inquiries, please contact PRIME-LINE customer support directly or refer to the official PRIME-LINE website.
Customer Support
For technical assistance, replacement parts, or further information regarding the PRIME-LINE L 5908 Plastic Screen Clips, please visit the official PRIME-LINE website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
PRIME-LINE Official Website: www.prime-line-products.com
