Technical Precision KOWA-SL-14-AZ-360K-6
Technical Precision KOWA-SL-14 Replacement Light Bulb User Manual
Model: KOWA-SL-14-AZ-360K-6
Introduction
This manual provides essential information for the safe and effective use of your Technical Precision KOWA-SL-14 Replacement Light Bulb. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the product.
Product Overview
Image: A clear glass light bulb with a white plastic base. The bulb has internal filaments visible through the glass. This is the Technical Precision KOWA-SL-14 Replacement Light Bulb.
The KOWA-SL-14 is a replacement light bulb designed for specific applications requiring 7.20 Volts and 15 Watts. It features a clear glass envelope and a distinct white base for secure fitting.
Setup and Installation
- Safety First: Before attempting installation, ensure the power supply to the fixture is turned off at the circuit breaker to prevent electrical shock.
- Allow Cooling: If replacing an existing bulb, allow the old bulb to cool completely before handling to avoid burns.
- Remove Old Bulb: Carefully unscrew or unclip the old bulb from its socket. Dispose of it according to local regulations.
- Insert New Bulb: Align the base of the KOWA-SL-14 replacement bulb with the socket. Gently push and/or twist the bulb into place until it is securely seated. Do not overtighten or force the bulb.
- Restore Power: Once the new bulb is securely installed, restore power to the fixture at the circuit breaker.
- Test: Turn on the light switch to confirm the bulb is functioning correctly.
If you are unsure about the installation process, consult a qualified electrician.
Operating Instructions
This light bulb operates like any standard incandescent bulb. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is activated.
- Power On/Off: Use the light switch connected to the fixture to turn the bulb on or off.
- Dimming: This bulb is designed for specific voltage and wattage. Compatibility with dimmers depends on the dimmer type and the fixture. Consult your fixture's manual or a qualified electrician if you intend to use it with a dimmer.
Maintenance
The KOWA-SL-14 replacement bulb requires minimal maintenance.
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the glass and base with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: Replace the bulb when it burns out. Follow the "Setup and Installation" steps for safe replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture. Bulb not properly seated. Bulb is faulty. | Check circuit breaker and light switch. Ensure bulb is securely installed. Replace bulb with a new one. |
| Bulb flickers. | Loose connection. Incompatible dimmer. Voltage fluctuations. | Ensure bulb is securely seated. Remove dimmer or replace with compatible type. Consult an electrician for voltage issues. |
| Bulb burns out quickly. | Over-voltage. Excessive vibration. Frequent on/off cycling. | Verify fixture voltage matches bulb specifications. Ensure fixture is stable. Reduce frequency of switching if possible. |
Specifications
- Model: KOWA-SL-14-AZ-360K-6
- Type: Replacement Light Bulb / Lamp
- Voltage: 7.20 Volts
- Wattage: 15 Watts
- Manufacturer: Technical Precision
- ASIN: B01GDAZUY6
- First Available: November 1, 2016
Warranty and Support
For information regarding warranty coverage or technical support, please refer to the original purchase documentation or contact Technical Precision directly through their official website or customer service channels. Keep your proof of purchase for any warranty claims.
For further assistance, you may also visit the product page on Amazon.ca: Product Link