Nilfisk Compact Patio Cleaner Attachment

1. Product Overview

The Nilfisk Compact Patio Cleaner Attachment is designed to provide an efficient and consistent cleaning solution for various outdoor surfaces. This attachment connects to compatible Nilfisk pressure washers, utilizing rotating jets and a bristle brush to clean large flat areas more effectively than a standard lance.

It is suitable for cleaning patios, paths, driveways, and can also be used on vertical surfaces such as walls, fences, and garage doors. The design ensures a consistent cleaning result across different surface types including wood, stone, concrete, tile, and brick.

Figure 1: The Nilfisk Compact Patio Cleaner Attachment. This image shows the blue circular cleaning head with a black handle extending upwards, ready for connection to a pressure washer.

2. Safety Information

WARNING: Read all safety warnings and instructions before using this product.

• Always wear appropriate personal protective equipment (PPE), including eye protection and sturdy footwear, when operating a pressure washer and its attachments.
• Ensure the attachment is securely connected to the pressure washer lance before starting the unit.
• Do not direct the water jet at people, animals, electrical equipment, or the unit itself.
• Keep children and pets away from the work area.
• Disconnect the attachment from the pressure washer and release any residual pressure before performing any maintenance or cleaning.
• Do not use the attachment if any parts are damaged. Contact Nilfisk customer support for replacement parts.

3. Setup and Assembly

The Nilfisk Compact Patio Cleaner Attachment uses the Click&Clean connectivity system for easy attachment to compatible Nilfisk pressure washers (C105, C110, C120, C125 & C130 series).

3.1 Attaching the Patio Cleaner

1. Ensure your pressure washer is turned off and disconnected from the power supply and water source.
2. Remove any existing lance or attachment from the pressure washer gun.
3. Align the Click&Clean connector on the patio cleaner attachment with the receiver on the pressure washer gun.
4. Push the attachment firmly into place until you hear a "click," indicating it is securely locked. Gently pull on the attachment to confirm it is properly seated.

Figure 2: A user demonstrating the Nilfisk Compact Patio Cleaner in use on a paved patio. The attachment is connected to a pressure washer hose and is being guided across the surface.

3.2 Connecting Water and Power

1. Connect the pressure washer to a suitable water supply.
2. Connect the pressure washer to a grounded power outlet.
3. Turn on the water supply and allow water to flow through the pressure washer and attachment to purge any air.
4. Turn on the pressure washer.

4. Operating Instructions

The Nilfisk Compact Patio Cleaner is designed for efficient cleaning of various outdoor surfaces.

4.1 Surface Preparation

• Clear the area to be cleaned of any loose debris, furniture, or obstacles.
• For heavily soiled areas, consider pre-treating with a suitable cleaning detergent designed for pressure washers.

4.2 Cleaning Flat Surfaces (Patios, Driveways, Paths)

1. Hold the pressure washer gun with the patio cleaner attachment firmly.
2. Position the cleaning head flat on the surface to be cleaned. The bristle brush around the edge helps contain water spray.
3. Engage the trigger on the pressure washer gun. The internal rotating jets will begin to clean the surface.
4. Move the patio cleaner slowly and steadily across the surface in overlapping passes to ensure even cleaning. Avoid lifting the cleaner off the surface while the trigger is engaged to prevent uneven cleaning patterns.
5. For stubborn dirt, make multiple passes over the affected area.

Figure 3: A user cleaning a paved driveway. The image shows the Nilfisk Compact Patio Cleaner effectively removing dirt and grime from the surface, leaving a clean path behind it.

4.3 Cleaning Vertical Surfaces (Walls, Fences, Garage Doors)

The patio cleaner can also be used on vertical surfaces. Hold the attachment at a slight angle to the surface, ensuring the bristle brush maintains contact to minimize splash-back. Move the cleaner in controlled, overlapping strokes.

4.4 After Use

1. Release the pressure washer trigger.
2. Turn off the pressure washer and disconnect it from the power supply.
3. Turn off the water supply.
4. Engage the pressure washer trigger briefly to release any residual pressure in the system.
5. Disconnect the patio cleaner attachment from the pressure washer gun.

5. Maintenance and Storage

Proper maintenance ensures the longevity and optimal performance of your Nilfisk Compact Patio Cleaner.

5.1 Cleaning the Attachment

• After each use, rinse the patio cleaner attachment thoroughly with clean water to remove any dirt, debris, or detergent residue.
• Inspect the bristle brush for wear or damage. Replace if necessary.
• Check the rotating jets for blockages. If blocked, carefully clear them using a small pin or the nozzle cleaning tool provided with your pressure washer (if applicable).

5.2 Storage

• Store the patio cleaner in a clean, dry, and frost-free environment.
• Avoid storing in direct sunlight or extreme temperatures.
• Ensure the attachment is completely dry before storing to prevent mold or mildew growth.

6. Troubleshooting

This section addresses common issues you might encounter with your Nilfisk Compact Patio Cleaner.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Nilfisk customer support.

7. Specifications

8. Warranty and Support

8.1 Manufacturer's Warranty

This Nilfisk product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and purchase date. Please refer to the warranty card included with your original pressure washer or visit the official Nilfisk website for detailed warranty information.

Keep your proof of purchase (receipt) for warranty claims.

8.2 Customer Support

For technical assistance, spare parts, or warranty inquiries, please contact Nilfisk customer support. Contact details can typically be found on the Nilfisk official website or in the documentation provided with your pressure washer unit.

When contacting support, please have your product model number (128500700) and proof of purchase readily available.