1. Introduction
Thank you for choosing the Chende Hollywood Vanity Mirror. This mirror is designed to provide optimal lighting for makeup application, grooming, and dressing. It features replaceable LED bulbs, a convenient power outlet, and adjustable brightness. This manual provides essential information for safe installation, operation, and maintenance of your new mirror.
2. Safety Information
WARNING: This mirror is made of glass and may break if not handled or installed properly. Always use caution when installing and ensure the wall can support the weight. Do not attempt to install if you are not comfortable doing so. Keep the mirror away from areas where it can be easily knocked over or broken. Always supervise children around the mirror.
- Ensure the power cord is not damaged or pinched.
- Do not expose the mirror to excessive moisture or direct water spray.
- Unplug the mirror from the power outlet before cleaning or replacing bulbs.
- Use only the specified 12V dimming LED bulbs for replacement.
3. Package Contents
Please verify that all components are present before beginning assembly:
- Hollywood Vanity Mirror Unit
- Detachable Wooden Base
- 14 x 12V Dimmable LED Bulbs (plus spare bulbs)
- Power Adapter
- Mounting Hardware (screws and drywall anchors for wall mounting)
4. Setup and Installation
Your Chende Hollywood Vanity Mirror can be set up in two configurations: tabletop or wall-mounted.
4.1 Tabletop Installation
- Carefully unpack all components and place them on a soft, flat surface to prevent scratches.
- Attach the detachable wooden base to the bottom of the mirror unit using the provided screws. Ensure the base is securely fastened.
- Place the assembled mirror on a stable vanity desk or table.
Image: Chende Hollywood Vanity Mirror set up on a white vanity desk.
4.2 Wall-Mounted Installation
- If the wooden base is attached, detach it from the mirror unit.
- Identify a suitable location on the wall that can support the mirror's weight (approximately 29.7 pounds).
- Use the provided screws and drywall anchors to securely mount the mirror to the wall. Ensure the mirror is level and stable.
Image: Chende Hollywood Vanity Mirror installed as a wall-mounted unit.
4.3 Bulb Installation
- Gently screw each LED bulb into the sockets around the mirror frame until secure. Do not overtighten.
- Plug the power adapter into the mirror's power input and then into a standard electrical outlet.
Image: Close-up view of an LED bulb screwed into the mirror frame.
5. Operating Instructions
5.1 Power On/Off and Brightness Adjustment
The mirror features a rotary dimmer switch located on the side of the frame. Rotate the knob clockwise to turn on the lights and increase brightness. Rotate counter-clockwise to decrease brightness and turn off the lights.
Image: Rotary dimmer switch for brightness control, illustrating 30%, 50%, and 100% brightness levels.
5.2 Integrated Power Outlet
A standard power outlet is integrated into the side of the mirror frame. This allows you to conveniently plug in small electrical appliances such as hair dryers, curling irons, or phone chargers directly at your vanity.
Image: Integrated power outlet on the mirror frame, suitable for various electrical appliances.
6. Maintenance
6.1 Bulb Replacement
The LED bulbs are designed to be easily replaceable. If a bulb stops working:
- Ensure the mirror is unplugged from the power source.
- Carefully unscrew the non-working bulb.
- Screw in a new 12V dimming LED bulb (available for purchase separately or use included spares).
- Plug the mirror back in and test the new bulb.
Image: Illustration of replaceable LED bulbs for easy maintenance.
6.2 Cleaning
To clean the mirror surface and frame:
- Unplug the mirror before cleaning.
- Use a soft, lint-free cloth and a non-abrasive glass cleaner for the mirror surface.
- For the frame, wipe with a damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.
7. Troubleshooting
- Lights not turning on: Check if the mirror is properly plugged into a working power outlet. Ensure the dimmer switch is turned on and rotated to a sufficient brightness level. Verify that all bulbs are securely screwed in.
- Bulbs flickering: Ensure all bulbs are screwed in tightly. If a specific bulb flickers, try replacing it with a spare.
- Outlet not working: Check if the mirror is powered on. Ensure the device plugged into the outlet is functioning correctly.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Chende |
| Model Dimensions (L x W) | 31.5" x 23.62" |
| Overall Item Dimensions | 32 x 26 x 2.4 inches |
| Item Weight | 29.7 Pounds |
| Frame Material | Aluminum |
| Color | White (Frame Color: silver) |
| Mounting Type | Self Assembly (Tabletop or Wall-Mounted) |
| Additional Features | Dimmable, Integrated Power Outlet, Replaceable Bulbs |
| Included Components | Bulb included, Light kit included |
Image: Technical drawing showing the dimensions of the mirror.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Chende customer service directly. Keep your purchase receipt for any warranty claims.