Milton C1067 Commercial High Pressure Inflator Gauge Element Instruction Manual

Introduction

This instruction manual provides essential information for the proper use, installation, and maintenance of your Milton C1067 Commercial High Pressure Inflator Gauge Element. Please read this manual thoroughly before operation to ensure safe and efficient performance.

Product Description

The Milton C1067 is a high-pressure gauging element designed for commercial applications. It offers a pressure range of 10-150 PSI and is intended as a replacement part for compatible inflator assemblies.

What's in the Box

• Commercial High Pressure Inflator Gage Element

Product Overview

Image: The Milton C1067 Commercial High Pressure Inflator Gauge Element, a blue rectangular body with a circular pressure display and a quick-connect M-style plug on one end. A label on the side indicates 'MILTON IND. INC. DATE CALIBRATED'.

Key Features

• Pressure Range: 10 to 150 pounds per square inch (PSI)
• Replacement Part: Designed for use with existing inflator assemblies.
• M Style Plug: Facilitates easy coupling and uncoupling with inflator assembly kits or dual head chuck gauge assemblies.
• Made in USA: Manufactured in the United States.

Setup

The Milton C1067 is a gauging element and requires integration into a compatible inflator assembly. Ensure the inflator assembly is depressurized before proceeding.

1. Identify Connection Point: Locate the existing gauging element or the designated connection point on your inflator assembly kit or dual head chuck gauge assembly.
2. Remove Old Element (if applicable): Carefully uncouple or unscrew the old gauging element from the assembly.
3. Install New Element: Connect the M style plug of the Milton C1067 to the corresponding receptacle on your inflator assembly. Ensure a secure and leak-free connection.
4. Verify Connection: Gently tug on the element to confirm it is properly seated and locked into place.

Operating Instructions

This gauge element functions as a pressure indicator within a larger inflator system. Its operation is dependent on the primary inflator assembly.

1. Connect to Tire Valve: Attach your inflator assembly's chuck to the tire valve stem.
2. Initiate Inflation: Activate your air compressor or inflation source.
3. Read Pressure: Observe the pressure reading on the Milton C1067 gauge element. The needle will indicate the current pressure in PSI.
4. Adjust Pressure: Inflate or deflate the tire as needed to reach the desired pressure.
5. Disconnect: Once the desired pressure is achieved, disconnect the inflator chuck from the tire valve and the gauge element from the air source.

Important: Do not exceed the maximum pressure rating of 150 PSI for this gauge element or the recommended pressure for the tire being inflated.

Maintenance

Regular maintenance ensures the accuracy and longevity of your Milton C1067 gauge element.

• Cleaning: Keep the gauge element clean and free from dirt, dust, and debris. Use a soft, dry cloth for cleaning. Avoid harsh chemicals.
• Storage: Store the gauge element in a clean, dry environment when not in use.
• Inspection: Periodically inspect the gauge for any signs of damage, such as cracks in the display or bent connectors. Replace if damaged.
• Calibration: While the unit is calibrated by the manufacturer, regular professional calibration may be required for applications demanding high precision.

Troubleshooting

This section addresses common issues you might encounter with the Milton C1067 gauge element.

• Inaccurate Reading:
  • Ensure the gauge is securely connected and there are no air leaks in the system.
  • Verify the gauge is within its operating pressure range (10-150 PSI).
  • If issues persist, the gauge may require professional calibration or replacement.
• Air Leakage at Connection:
  • Check that the M style plug is fully engaged and locked into the inflator assembly.
  • Inspect the O-rings or seals on the inflator assembly for wear or damage.

Specifications

Warranty and Support

For warranty information or technical support regarding your Milton C1067 Commercial High Pressure Inflator Gauge Element, please refer to the official Milton Industries website or contact their customer service directly. Keep your purchase receipt for warranty claims.

Milton Industries Contact Information: www.miltonindustries.com