Product Overview
This manual provides essential information regarding the Hobart Rolling Spring, a replacement part designed for Hobart FTN and CSA series dishwashers. This component is vital for the smooth and controlled operation of the dishwasher door, ensuring it opens and closes correctly.
Image Description: This image displays the Hobart rolling spring, a critical component for maintaining proper dishwasher door function. The spring features a copper-colored coil wrapped around a white cylindrical core, with a flat, slotted metal tab extending from one end for secure attachment within the dishwasher mechanism.
Key Features:
- Application: Specifically designed for dishwasher use.
- Band Width: 40 mm.
- Inner Diameter: Ø 10.5 mm.
- Lug Length: 54 mm.
- Purpose: For dishwasher door mechanisms.
Specifications
| Attribute | Value |
|---|---|
| Brand | Hobart |
| Manufacturer Reference | 4251188774726 |
| Item Number | 4251188774726 |
| Voltage | 1 Voltage |
| Batteries Included? | No |
| Batteries Required? | No |
| Manufacturer | Hobart |
| ASIN | B01EJB0V4A |
| First Available Date | July 7, 2020 |
Installation Guide (Setup)
Safety Warning:
Always disconnect the dishwasher from the power supply before attempting any installation or repair. If you are unsure about any step, it is highly recommended to consult a qualified technician or refer to your dishwasher's specific service manual.
- Preparation: Ensure the dishwasher is unplugged and the water supply is turned off. Clear the area around the dishwasher door for easy access.
- Accessing the Spring Mechanism: Depending on your dishwasher model, you may need to remove the outer door panel or access the spring mechanism from the bottom or side of the appliance. Refer to your dishwasher's service manual for exact instructions.
- Removing the Old Spring: Carefully detach the old rolling spring. Note its orientation and how it was connected. Springs can be under tension, so exercise caution to prevent injury.
- Installing the New Spring: Position the new Hobart rolling spring (Model: 4251188774726) in the same manner as the old one. Ensure the lug and coil are correctly seated and secured.
- Testing and Reassembly: Once the new spring is in place, carefully test the door's movement to ensure it operates smoothly. Reassemble any panels or components that were removed.
- Final Check: Reconnect the dishwasher to the power supply and water. Perform a final check of the door's operation.
Maintenance
The Hobart rolling spring is designed for durability and typically requires minimal maintenance. However, periodic inspection can prolong its lifespan and ensure optimal dishwasher door performance:
- Visual Inspection: Annually inspect the spring for any signs of wear, corrosion, or damage. Check if the coil is intact and if the attachment points are secure.
- Cleaning: If accessible, gently clean any accumulated debris or grease around the spring mechanism to prevent hindrance of movement. Use a damp cloth and mild detergent if necessary, ensuring no moisture enters electrical components.
- Lubrication: Avoid applying lubricants unless specifically recommended by Hobart or your dishwasher manufacturer, as some lubricants can attract dirt or degrade plastic components.
Troubleshooting
If your dishwasher door is not functioning correctly after replacing the rolling spring, consider the following common issues:
- Door Not Staying Open/Closed:
- Incorrect Installation: Double-check that the new spring is installed correctly and securely, matching the orientation of the original spring.
- Incorrect Spring Type: Ensure you have the correct Hobart rolling spring (Model: 4251188774726) for your specific dishwasher model.
- Other Components: The issue might not be solely with the spring. Inspect other door components such as hinges, cables, or counterweights for damage or misalignment.
- Door Squeaking/Grinding:
- Friction: Ensure the spring and its surrounding components are free from debris.
- Misalignment: Check for any misalignment that might cause friction during door movement.
If problems persist, it is advisable to contact a professional appliance technician.
Warranty Information
Specific warranty details for replacement parts like the Hobart rolling spring are typically provided by the seller at the time of purchase or are covered under the warranty of the original appliance if installed by an authorized service provider. Please retain your proof of purchase for any warranty claims.
For detailed warranty terms, please refer to the documentation that came with your original Hobart dishwasher or contact the seller directly.
Support
For technical assistance, installation queries, or to report a faulty part, please contact your authorized Hobart service provider or the retailer from whom you purchased this rolling spring.
You may also visit the official Hobart website for general support information and to locate service centers in your region. When contacting support, please have your dishwasher model number and the rolling spring's item number (4251188774726) ready.