Technical Precision 401 COLOR HEAD
User Manual for PAVELLE 401 Color Head Light Bulb Replacement
Model: 401 COLOR HEAD | Brand: Technical Precision
Product Overview
This document provides comprehensive instructions for the safe and effective use of the Technical Precision replacement bulb for the PAVELLE 401 Color Head. This bulb is designed as a direct replacement and is not manufactured by PAVELLE.
Image: A clear view of the PAVELLE 401 Color Head Light Bulb Replacement. It features a standard two-pin base and a clear, dome-shaped glass housing, typical of a halogen or incandescent bulb designed for specific lighting fixtures.
Setup Instructions
Proper installation is crucial for the bulb's performance and safety. Please follow these steps carefully:
- Safety First: Before attempting to replace the bulb, ensure the power supply to the fixture is completely turned off. Disconnect the fixture from the power source if possible. Allow the old bulb to cool down completely if it was recently in use.
- Remove Old Bulb: Carefully grasp the old bulb and gently pull it straight out from its socket. Avoid twisting if the base is a two-pin type, as this can damage the socket.
- Handle New Bulb: Handle the new replacement bulb by its base or edges. Avoid touching the glass portion directly with bare hands, as oils from your skin can create hot spots and reduce bulb life. If you accidentally touch the glass, wipe it clean with a lint-free cloth moistened with rubbing alcohol.
- Insert New Bulb: Align the two pins of the new bulb with the corresponding holes in the fixture's socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
- Restore Power: Once the new bulb is securely installed, restore power to the fixture.
Operating Instructions
This replacement bulb operates like a standard incandescent bulb. Its operation is controlled by the fixture it is installed in.
- Turning On/Off: Use the existing switch or control mechanism of your PAVELLE 401 Color Head fixture to turn the light on or off.
- Dimming: If your fixture supports dimming and is compatible with incandescent bulbs, this replacement bulb should function with the dimmer. Ensure your dimmer is rated for the bulb's wattage.
Maintenance
Minimal maintenance is required for this light bulb. Following these guidelines can help prolong its lifespan:
- Cleaning: If the bulb's glass surface accumulates dust or debris, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. For stubborn marks, a cloth lightly dampened with rubbing alcohol can be used, ensuring the bulb is completely dry before restoring power.
- Handling: Always handle the bulb by its base when installing or removing it. Avoid dropping or subjecting the bulb to strong impacts.
- Storage: If storing spare bulbs, keep them in their original packaging in a cool, dry place to protect them from damage and dust.
Troubleshooting
If the bulb does not light up or exhibits unusual behavior, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture. | Check the circuit breaker or fuse. Ensure the fixture switch is on. |
| Bulb is loose in the socket. | Ensure the bulb is fully and securely inserted into the socket. Turn off power before adjusting. | |
| Incorrect bulb type or wattage. | Verify that this replacement bulb is compatible with your PAVELLE 401 Color Head fixture and that the wattage is appropriate. | |
| Bulb has reached end of life. | Replace the bulb with a new one. | |
| Bulb flickers. | Loose connection. | Turn off power, remove bulb, and reinsert firmly. |
| Incompatible dimmer. | Ensure your dimmer is compatible with incandescent bulbs and rated for the bulb's wattage. |
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | Technical Precision |
| Model Number | 401 COLOR HEAD |
| Wattage | 200 Watts |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Shape | Arbitrary(A) |
| Material | Glass |
| Connectivity Technology | Normal bulb |
| Controller Type | Push Button (Refers to fixture control) |
| Control Method | App (Refers to fixture control, if applicable) |
| Part Number | 401 COLOR HEAD |
| ASIN | B01EHWTY1M |
| Date First Available | April 19, 2016 |
Warranty and Support
This replacement bulb is provided by Technical Precision. For specific warranty information, please refer to the seller's policy at the time of purchase. Generally, products purchased on Amazon.com may be eligible for returns within 30 days of receipt, subject to Amazon's return policy.
For further assistance or inquiries regarding this product, please contact Technical Precision directly through their official channels or the platform where the purchase was made.
Manufacturer: Technical Precision
Seller: Technical Precision
Seller Link: Technical Precision Seller Profile