PHAT SATELLITE AT&T DIRECTV HD Satellite Dish SWM5 LNB

1. Introduction

This manual provides essential instructions for the proper installation, operation, and maintenance of your PHAT SATELLITE AT&T DIRECTV HD Satellite Dish with SWM5 LNB. Please read this manual thoroughly before attempting any installation or operation to ensure safe and correct usage of the product.

2. Safety Information

• Professional Installation Recommended: Due to the precision required for satellite dish aiming and the potential hazards of working at heights, professional installation is highly recommended.
• Electrical Safety: Ensure all cable connections are secure and protected from weather elements. Do not attempt to connect or disconnect cables during a lightning storm.
• Working at Heights: If self-installing, use appropriate safety equipment, including ladders, harnesses, and fall protection. Ensure the mounting surface is stable and secure.
• Cable Management: Route cables safely to prevent tripping hazards and damage. Avoid kinking or sharply bending coaxial cables.

3. Package Contents

Verify that all components listed below are present in your package:

• DIRECTV HD Satellite Dish Kit with Low Profile Mount
• SWM5 LNB (for new receivers: H24, H25, GENIE)
• 50ft RG6 Coaxial Cable with Professional Compressed Connectors
• 9ft RG6 Coaxial Cable with Professional Compressed Connectors
• 8" Flat Cable (for running signal line under door/window sill)
• 12ft High Speed HDMI Cable

Image 1: Overview of the PHAT SATELLITE AT&T DIRECTV HD Satellite Dish with SWM5 LNB. This image displays the main dish reflector, the LNB arm, and the SWM5 LNB unit, which is crucial for receiving satellite signals.

4. Setup

The installation of a satellite dish requires careful attention to detail, particularly regarding aiming. It is strongly recommended to consult with a professional installer or refer to official DIRECTV installation guides for precise aiming instructions specific to your geographical location.

4.1 Mounting the Dish

1. Select a mounting location that provides a clear line of sight to the DIRECTV satellites (typically south-southeast in North America) and is structurally sound.
2. Assemble the dish reflector to the low-profile mount according to the manufacturer's instructions.
3. Securely attach the assembled dish and mount to the chosen surface using appropriate hardware. Ensure the mount is level before tightening.

4.2 Connecting the SWM5 LNB

1. Attach the SWM5 LNB to the LNB arm on the dish. Ensure it is firmly seated and oriented correctly.
2. Connect one end of an RG6 coaxial cable to the output port on the SWM5 LNB.
3. Route the coaxial cable from the LNB to the location of your DIRECTV receiver. Use the 8" flat cable to pass the signal line into your interior under a door or window sill if drilling is not desired.
4. Connect the other end of the coaxial cable to the 'SAT IN' port on your compatible DIRECTV receiver (H24, H25, GENIE models).
5. Note: For new receivers (H24, H25, GENIE), a separate power inserter is typically not required and is not included in this package.

4.3 Aiming the Dish

Accurate dish aiming is critical for signal reception. This process involves adjusting the azimuth (horizontal), elevation (vertical), and tilt (skew) of the dish. Specialized tools and knowledge are often required. Refer to your DIRECTV receiver's on-screen setup menu for signal strength meters and specific aiming coordinates for your location, or contact a professional installer.

4.4 HDMI Connection

Connect the provided 12ft High Speed HDMI Cable from your DIRECTV receiver to an available HDMI input on your high-definition television for optimal video and audio quality.

5. Operating

Once the satellite dish is correctly installed and aimed, and all cables are connected, power on your DIRECTV receiver and television. Follow the on-screen prompts from your receiver to complete the initial setup and channel scanning process. The SWM5 LNB is designed to provide a single wire solution for compatible receivers, simplifying the connection process.

6. Maintenance

• Regular Inspection: Periodically inspect the dish, mount, and cables for any signs of damage, corrosion, or loose connections.
• Cleaning: Gently clean the dish reflector surface with a soft cloth and mild detergent if dirt or debris accumulates, which can interfere with signal reception. Avoid abrasive cleaners.
• Snow and Ice: In snowy or icy conditions, carefully remove accumulations from the dish surface to maintain signal quality. Do not use sharp objects that could damage the dish.

7. Troubleshooting

If you experience issues with your satellite system, consider the following common troubleshooting steps:

• No Signal/Poor Signal:
  • Verify all cable connections are secure at both the LNB and the receiver.
  • Check for any obstructions (e.g., new tree growth, buildings) in the line of sight to the satellite.
  • Confirm the dish's aim has not shifted due to wind or other factors. Re-aiming may be necessary, which often requires professional assistance.
• Receiver Compatibility: Ensure your DIRECTV receiver is compatible with the SWM5 LNB (H24, H25, GENIE models).
• Power Inserter: Remember that a power inserter is generally not required for new SWM-compatible receivers (H24, H25, GENIE) with this SWM5 LNB. If you are using an older receiver, consult DIRECTV documentation for power inserter requirements.

For persistent issues, contact DIRECTV customer support or a qualified satellite technician.

8. Specifications

9. Warranty Information

Specific warranty details for this product are not provided in this manual. Please retain your proof of purchase and contact the seller or manufacturer directly for information regarding warranty coverage and terms.

10. Support

For further assistance, technical support, or compatibility inquiries, please contact the PHAT SATELLITE helpdesk or refer to the official DIRECTV support resources.