Truvision TVI Surveillance Dome Camera 720P 2.8-12MM TVI IR (ASIN: B01E9FWYR8)

Truvision TVI Surveillance Dome Camera 720P 2.8-12MM TVI IR User Manual

Brand: Truvision | Model: TVI Surveillance Dome Camera 720P 2.8-12MM TVI IR (ASIN: B01E9FWYR8)

Introduction

The TruVision line brings the benefits of digital security monitoring to commercial applications. Easy to install and operate, TruVision cameras, recorders, monitors and interfaces deliver practical and reliable video surveillance, even in the most challenging environments. For complete security on a moderate budget, the TruVision line is the perfect fit.

Product Overview and Features

The Interlogix Truvision TVI Surveillance Dome Camera is designed for robust surveillance, offering high-definition recording and advanced features for comprehensive security monitoring.

Truvision TVI Surveillance Dome Camera, a white dome-shaped camera with a dark lens and visible infrared LEDs.

Figure 1: Truvision TVI Surveillance Dome Camera. This image displays the front view of the dome camera, highlighting its compact design, adjustable lens, and integrated infrared illuminators for night vision capabilities.

Key Features:

  • HD Recording: Yes
  • Night Vision Distance: 132 ft (40.23 meters)
  • Color Supported: Color
  • Maximum Video Resolution: 1920 x 1080 (Full HD)
  • Form Factor: Dome
  • Image Sensor Type: CMOS
  • Minimum Focal Length: 2.80 mm
  • Maximum Focal Length: 12 mm
  • Optical Zoom: 265x
  • Connectivity Technology: Cable (Wired)
  • Mounting Type: Wall Mount
  • Video Capture Resolution: 720p
  • Low light technology: Night Color
  • International Protection Rating: IP54

Setup Guide

Follow these steps to properly set up your Truvision TVI Surveillance Dome Camera.

  1. Unboxing and Inspection: Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the packing list for included items.
  2. Mounting Location Selection: Choose a suitable location for mounting the camera. Consider factors such as desired field of view, lighting conditions, and proximity to power and video cables. Ensure the surface is stable enough to support the camera's weight.
  3. Mounting the Camera:
    • Use the provided mounting template (if applicable) to mark drilling points on the chosen surface.
    • Drill pilot holes and insert wall anchors if necessary.
    • Secure the camera base to the mounting surface using appropriate screws.
    • Adjust the camera's orientation and angle as needed for optimal coverage.
  4. Wiring Connections:
    • Connect the video cable (BNC connector) from the camera to your Digital Video Recorder (DVR) or monitoring system.
    • Connect the power cable to the camera's power input. Ensure the power supply matches the camera's voltage requirements (e.g., 12V DC).
    • Route cables neatly and securely to prevent damage or tampering.
  5. Powering On: Once all connections are secure, connect the power adapter to a power outlet. The camera should power on, and its indicator lights (if any) may illuminate.
  6. Initial Configuration (DVR/NVR): Access your DVR/NVR system. The camera should be detected automatically. If not, refer to your DVR/NVR manual for adding new cameras. Adjust camera settings such as resolution, frame rate, and image quality through the DVR/NVR interface.

Operating Instructions

This section outlines the basic operation of your Truvision TVI Surveillance Dome Camera in conjunction with a compatible DVR/NVR system.

  1. Accessing Live View:
    • Turn on your DVR/NVR and connected monitor.
    • Log in to your DVR/NVR system using your credentials.
    • Navigate to the "Live View" or "Monitor" section to see the real-time video feed from your camera.
  2. Recording Video:
    • Continuous Recording: Most DVRs are set to record continuously by default. Verify this setting in your DVR's recording schedule.
    • Motion-Activated Recording: To enable motion-activated recording, access the "Motion Detection" settings for the camera in your DVR/NVR. Define detection zones and sensitivity levels.
    • Scheduled Recording: Set specific times for recording in the DVR's schedule settings.
  3. Playback Recorded Footage:
    • Go to the "Playback" or "Search" menu on your DVR/NVR.
    • Select the camera and the date/time range you wish to review.
    • Use the playback controls (play, pause, fast forward, rewind) to navigate through the footage.
  4. Adjusting Camera Settings:
    • Access the camera settings through your DVR/NVR's menu.
    • Adjust image parameters such as brightness, contrast, saturation, and sharpness.
    • Configure advanced settings like Wide Dynamic Range (WDR), Backlight Compensation (BLC), and Digital Noise Reduction (DNR) if available.
  5. Remote Access (if applicable): If your DVR/NVR supports remote viewing, follow its instructions to set up network access and view your camera feed from a smartphone or computer.

Maintenance

Regular maintenance ensures optimal performance and longevity of your surveillance camera.

  • Lens Cleaning: Periodically clean the camera lens and dome cover with a soft, lint-free cloth. For stubborn dirt, use a mild lens cleaning solution. Avoid abrasive materials that could scratch the surface.
  • Cable Inspection: Regularly inspect all cables (power and video) for signs of wear, damage, or loose connections. Secure any loose cables to prevent accidental disconnection.
  • Firmware Updates: Check the manufacturer's website periodically for firmware updates for your camera or DVR/NVR. Firmware updates can improve performance, add new features, and address security vulnerabilities. Follow the manufacturer's instructions carefully when performing updates.
  • Environmental Checks: Ensure the camera's environment remains within its specified operating temperature and humidity ranges. Clear any obstructions that might block the camera's view or ventilation.
  • Recording Verification: Periodically check your DVR/NVR to ensure that recording is functioning correctly and that sufficient storage space is available.

Troubleshooting

This section provides solutions to common issues you might encounter with your Truvision TVI Surveillance Dome Camera.

ProblemPossible CauseSolution
No video signal on monitor.
  • No power to camera.
  • Loose or faulty video cable.
  • Incorrect video input selected on DVR/monitor.
  • Camera or DVR malfunction.
  • Check power supply and connections.
  • Ensure video cable is securely connected at both ends. Try a different cable.
  • Verify the correct video input channel is selected on your DVR/monitor.
  • Test camera with a known working power supply and DVR.
Poor image quality (blurry, distorted).
  • Dirty lens or dome cover.
  • Incorrect focus adjustment.
  • Insufficient lighting.
  • Interference in video signal.
  • Clean the lens and dome cover.
  • Adjust the camera's focus (if applicable) or the DVR's image settings.
  • Ensure adequate lighting in the surveillance area, especially at night.
  • Check cable quality and routing; avoid running cables near strong electrical interference sources.
Night vision not working or poor.
  • IR LEDs obstructed or faulty.
  • Insufficient power.
  • Environmental factors (e.g., reflective surfaces).
  • Ensure nothing is blocking the IR LEDs. Check if LEDs are illuminating.
  • Verify power supply meets camera requirements.
  • Adjust camera angle to minimize reflections from nearby objects.
Motion detection not triggering.
  • Incorrect sensitivity settings.
  • Detection zones not configured.
  • Environmental factors (e.g., shadows, light changes).
  • Adjust motion detection sensitivity in DVR/NVR settings.
  • Define or re-configure motion detection zones.
  • Minimize environmental factors that cause false triggers or prevent detection.

Specifications

Detailed technical specifications for the Truvision TVI Surveillance Dome Camera.

FeatureDetail
BrandTruvision
Connectivity TechnologyWired
Form FactorDome
HD RecordingYes
Night Vision Distance132 ft (40.23 meters)
Image Sensor TypeCMOS
Color SupportedColor
Maximum Video Resolution1920 x 1080
Minimum Focal Length2.80 mm
Maximum Focal Length12 mm
Optical Zoom265x
Mounting TypeWall Mount
Video Capture Resolution720p
Low light technologyNight Color
International Protection RatingIP54
Power SourceAc/dc
Item Weight2.92 pounds (1.32 kg)
Package Dimensions9.96 x 8.74 x 7.6 inches (25.3 x 22.2 x 19.3 cm)
ASINB01E9FWYR8
ManufacturerUTC (Formerly GE Security/Kalatel)
Date First AvailableApril 14, 2016

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Truvision website. Keep your proof of purchase for warranty claims.

If you encounter issues not covered in this manual, please contact Truvision customer support for assistance.

© 2024 Truvision. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.