Sangean WR-50P AM/FM Bluetooth Tabletop Stereo Digital Receiver User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Sangean WR-50P AM/FM Bluetooth Tabletop Stereo Digital Receiver. Please read this manual thoroughly before using the product to ensure proper function and to maximize your listening experience.

Safety Information

• Do not expose the unit to rain or moisture to prevent fire or electric shock.
• Ensure proper ventilation; do not block any ventilation openings.
• Avoid placing the unit near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Use only attachments/accessories specified by the manufacturer.
• Unplug the unit during lightning storms or when unused for long periods.
• Refer all servicing to qualified service personnel.
• Keep the power cord away from the main unit and other electronic devices to prevent interference, especially with AM/FM reception.

Package Contents

Verify that all items are present in your package:

• Sangean WR-50P Main Unit (AM/FM Bluetooth Receiver)
• Sangean SP-40 Auxiliary Speaker
• Remote Control (requires 2 AAA batteries, not included)
• AC Adapter
• Owner's Manual (this document)
• Warranty Card

Product Overview

The Sangean WR-50P system consists of a main receiver unit and an auxiliary speaker, designed to deliver high-quality stereo sound. Below are images illustrating the product components.

Figure 1: Front view of the Sangean WR-50P main unit (left) and its accompanying auxiliary speaker (right).

Figure 2: Angled view of the Sangean WR-50P main unit and auxiliary speaker, showcasing the wood cabinet finish.

Main Unit (Receiver)

• Front Panel: LCD display, control buttons (power, presets, source, menu), tuning/volume knobs.
• Rear Panel: FM telescopic rod antenna, auxiliary input, headphone output, subwoofer output, right channel speaker output, AC adapter input.

Auxiliary Speaker (SP-40)

• Connects to the main unit via a dedicated cable for stereo sound.

Setup

1. Placement:

   Place the main unit and auxiliary speaker on a stable, flat surface. For optimal stereo imaging, position the speakers at an appropriate distance from each other, experimenting with spacing and angles to suit your room's acoustics. Avoid placing the main unit near strong magnetic sources.

2. Connect Auxiliary Speaker:

   Connect the provided cable from the auxiliary speaker (SP-40) to the "Right Channel Speaker Output" on the rear panel of the main receiver unit.

3. Connect Antennas:
   • FM Antenna: Extend the built-in telescopic FM rod antenna for optimal FM reception. Adjust its position for best signal quality.
   • AM Antenna: The unit features a built-in Ferrite AM antenna. For best AM reception, you may need to slightly adjust the orientation of the main unit. An external AM antenna can also be connected to the dedicated input on the rear panel if desired (not included).
4. Connect Power:

   Connect the AC adapter to the "DC IN" jack on the rear of the main unit, then plug the adapter into a wall outlet. It is recommended to keep the power adapter (wall wart and noise regulator) at least 2 feet away from the main receiver unit to minimize potential radio interference.

5. Insert Remote Control Batteries:

   Open the battery compartment on the remote control and insert 2 AAA batteries, observing the correct polarity.

Operating Instructions

1. Power On/Off

Press the POWER button on the front panel or remote control to turn the unit on or off.

2. Selecting a Source

Press the SOURCE button on the front panel or remote control to cycle through available modes: FM, AM, Bluetooth, AUX.

3. AM/FM Radio Operation

• Tuning: In FM or AM mode, rotate the TUNING knob or use the TUNE +/- buttons on the remote to manually tune to a station. The DSP tuner provides precise signal acquisition.
• Auto Scan: Press and hold the TUNE +/- button for a few seconds to automatically scan for the next available station.
• Presets: The unit supports 10 station presets (5 FM, 5 AM) via the front panel, or 18 presets (9 FM, 9 AM) using the remote control.
  1. To Store a Preset: Tune to the desired station. Press and hold a preset button (1-5 on unit, 1-9 on remote) until the display confirms storage.
  2. To Recall a Preset: Briefly press the desired preset button.
• RDS-CT (FM only): When available, the radio will automatically synchronize the clock time via FM RDS-CT signals.

4. Bluetooth Wireless Audio Streaming

• Pairing: Select Bluetooth mode. The unit will enter pairing mode (indicated on the display). On your Bluetooth-enabled device, search for "Sangean WR-50P" and select it to pair.
• NFC Pairing: If your smartphone supports NFC (Near Field Communications), simply tap your NFC-enabled smartphone to the NFC area on the WR-50P to initiate pairing.
• Playback: Once paired, you can stream audio from your device to the WR-50P. Control playback (play/pause, skip tracks) from your connected device or the remote control.

5. Audio Controls

• Volume: Rotate the VOLUME knob or use the VOL +/- buttons on the remote.
• Bass/Treble: Use the dedicated Bass and Treble controls (usually accessible via the MENU button and tuning knob, or specific remote buttons) to adjust audio equalization.
• Loudness: Toggle the Loudness feature on/off to enhance bass and treble at low volumes.

6. Clock, Alarm, Sleep Timer, and Snooze

• Clock Setting: The clock can be set manually or automatically via FM RDS-CT. Refer to the menu options for manual time and date adjustment.
• Alarm Timers: Set up to two independent alarm timers. Configure alarm source (buzzer, radio) and volume.
• Sleep Timer: Set a timer for the unit to automatically turn off after a specified duration.
• Snooze Function: When an alarm sounds, press the SNOOZE button to temporarily silence it for a short period.

7. Auxiliary Input

Connect external audio devices (e.g., MP3 player, CD player) to the AUX IN jack on the rear panel using a 3.5mm audio cable (not included). Select AUX as the source to listen to the connected device.

8. Headphone Output

For private listening, connect headphones to the HEADPHONE OUT jack on the rear panel. The main speakers will be muted automatically.

9. Subwoofer Output

An optional subwoofer can be connected to the SUB OUT jack on the rear panel for enhanced bass response (subwoofer and cable not included).

10. LCD Display

The LCD display shows current mode, station frequency, time, and other relevant information. It features a backlight with adjustable brightness levels. You can configure the display to show station information or the time of day.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the unit's exterior. Do not use abrasive cleaners, waxes, or solvents.
• Remote Control Batteries: Replace the AAA batteries in the remote control when its range or responsiveness decreases. Ensure correct polarity.
• Storage: If storing the unit for an extended period, disconnect it from the power outlet and remove batteries from the remote control.

Troubleshooting

Specifications

Warranty Information

Your Sangean WR-50P comes with a manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.

Support

For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the official Sangean website or contact their customer support. Contact information can typically be found on the warranty card or the Sangean website.

Note: Product specifications and features are subject to change without notice.